If UCM defines the private alsa-lib configuration, the ELD controls
are expected to use this device configuration too.
With this change:
I: [pulseaudio] alsa-util.c: Successfully attached to mixer '_ucm0009.hw:Loopback'
Without:
I: [pulseaudio] alsa-util.c: Successfully attached to mixer '_ucm0009.hw:Loopback'
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:4'
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/673>
The hw: device can be addressed using the card index (hw:0)
or the card identifier (ASCII string - hw:Loopback). Both
mixers are equal.
The previous code was fine for the mixers without the UCM
private prefixes (_ucmXXXX). Make code more robust, create
two aliased mixer structures in the mixers array.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/673>
This makes it possible to define multiple sinks/sources on detection
of the jack server. This allows one to for example create a separate
sink for conferencing software and route that in jack to another
channel on their audio interface.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/669>
Even though the file name is currently behringer-umc22.conf, the USB ID
actually belongs to Texas Instruments PCM2902, which is a generic chip
used in multiple products. Some products have true mono input unlike
Behringer UMC22, which has two mono inputs combined into one stereo PCM
device.
This patch removes the "mono,mono" mapping from Behringer UMC22, which
hopefully won't be missed too much (there are still "mono,aux1" and
"aux1,mono" mappings available for mono recording).
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/667>
If the preferred ports are not set in this function, the
entrys_equal() always returns false in the card_put_hook_callback().
This will make the entry be written into the metadata and the
preferred ports will be cleaned by a mistake.
And we met a hdmi audio bug which has sth to do with this issue, on
the machines with the legacy HDA audio driver, the hdmi port has lower
priority than speaker, users need to manually select the hdmi to be
active output port, then the preferred output port is hdmi for this
sound card, after reboot, the card_put_hook_callback() in the
module-card-restore.c will be called and the preferred ports are
cleaned by a mistake, then the hdmi output port or hdmi sink couldn't
switch to be active after reboot or resume automatically. That is
because the preferred ports are cleaned and hdmi port has lower
priority than speaker, the profile_good_for_output() in the
module-switch-on-port-available.c always returns false.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Change d7f95170a1 added a dependency on device
adapter pointer being valid while checking if bluetooth profile is supported by
device.
When adapter object is released, each device holding pointer to adapter being
released is notified to reset that to NULL. Since adapter objects are released
first when discovery object is unreferenced, each device will have adapter
pointer reset before the time device objects are released.
Fix observed crash by examining device adapter pointer. If it is NULL report
that device does not support any bluetooth profile instead of looking at UUIDs
supported by adapter.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/646>
Add a log_interval parameter to control the amount of logging. Default is
no logging. Like for adjust_time, the parameter is a double to allow values
below 1s.
If the log interval is too small, logging will occur on every iteration.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/56>
The adjust_time parameter is changed to double to allow better granularity
and adjust times below 1s. This may be useful for a better latency control,
although with alsa devices and the current smoother code no significant
improvement could be found for values below 500ms.
This patch also changes the default adjust time to 1s, the old value of 10s
does not allow a tight control of the end to end latency and would lead to
unnecessary jitter.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/56>
The previous patch slows down initial convergence. Therefore do not use
the controller weight until we can assume that we reached an equilibrium.
Because it takes some time before the reported latency values are reliable,
assume that a steady state is reached when the target latency has been
crossed twice.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/56>
In many situations, the P-controller is too sensitive and therefore exhibits rate hunting.
To avoid rate hunting, the sensibility of the controller is set by the new parameter
adjust_threshold_usec. The parameter value is the deviation from the target latency in usec
which is needed to produce a 1 Hz deviation from the optimum sample rate.
The default is set to 250 usec, which should be sufficient in most cases. If the accuracy
of the latency reports is bad and rate hunting is observed, the parameter must be increased,
while it can be lowered to achieve less latency jitter if the latency reports are accurate.
More details at
https://www.freedesktop.org/software/pulseaudio/misc/rate_estimator.odt
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/56>
