When monitor source becomes idle it may happen that monitored sink has no
uncorked inputs anymore and can now be suspended. To allow this, detect if state
is changed for monitor source and check state of monitored sink instead.
This change allows pulseaudio to suspend devices when pavucontrol volume meters
are disabled and corresponding peaks resampled streams are corked.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/697>
Turned out that SelectConfiguration is only used for outgoing connections, and
incoming connection from bluetooth headset using SBC codec ends up with a
bitpool as large as declared by headset. When resulting bitpool is so large that
SBC frame size plus RTP header size exceeds write MTU size, number of frames per
packet becomes zero causing crash dividing by zero in update_sink_buffer_size()
Fix this by limiting available bitpool value exposed for SBC endpoints.
Fixes: 89082cbfa ("bluetooth: a2dp dual channel SBC XQ codec configurations")
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/695>
Commit c6d6ca541 ("bluetooth/gst: Replace buffer accumulation in adapter
with direct pull") removed the `timestamp` parameter from GStreamer
transcoders due to being unused, but these should instead be propagated
to the GStreamer encoding buffers.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/494>
Bluetooth codecs should always have fixed in/output and are hence able
to have their results directly read from the codec, instead of
accumulating in a buffer asynchronously that is subsequently only read
in the transcode callback. The Bluetooth backends calling encode/decode
also expect these fixed buffer sizes.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/494>
Handling multiple threads does not come without overhead, especially
when the end-goal is to ping-pong them making the whole system run
serially. This patch rips out all that thread handling and instead
"chains" buffers to be encoded/decoded directly into the pipeline,
making them execute their work on the current thread. The resulting
buffer can be pulled out from appsink immediately without require extra
locking and signalling. While the overhead on modern systems is found
to be negligible or unnoticable, code complexity of such locking and
signalling systems is prevalent making it the main drive behind this
refactor.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/494>
Drop rtpldacpay and payload the LDAC encoded output manually in the
RTP header.
The RTP payload seems to be required as it carries the frame count
information. Right now, rtpldacpay does not add this so construct
the RTP header and payload manually.
Strangely some devices like Shanling MP4 and Sony XM3 would still
work without this while some like the Sony XM4 does not.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/689>
If UCM defines the private alsa-lib configuration, the ELD controls
are expected to use this device configuration too.
With this change:
I: [pulseaudio] alsa-util.c: Successfully attached to mixer '_ucm0009.hw:Loopback'
Without:
I: [pulseaudio] alsa-util.c: Successfully attached to mixer '_ucm0009.hw:Loopback'
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:4'
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/673>
The hw: device can be addressed using the card index (hw:0)
or the card identifier (ASCII string - hw:Loopback). Both
mixers are equal.
The previous code was fine for the mixers without the UCM
private prefixes (_ucmXXXX). Make code more robust, create
two aliased mixer structures in the mixers array.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/673>
This makes it possible to define multiple sinks/sources on detection
of the jack server. This allows one to for example create a separate
sink for conferencing software and route that in jack to another
channel on their audio interface.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/669>
Even though the file name is currently behringer-umc22.conf, the USB ID
actually belongs to Texas Instruments PCM2902, which is a generic chip
used in multiple products. Some products have true mono input unlike
Behringer UMC22, which has two mono inputs combined into one stereo PCM
device.
This patch removes the "mono,mono" mapping from Behringer UMC22, which
hopefully won't be missed too much (there are still "mono,aux1" and
"aux1,mono" mappings available for mono recording).
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/667>
