Compare commits

...

44 commits

Author SHA1 Message Date
Simon Ser
88a8698557 build: bump version to 0.19.3 2026-03-19 20:13:09 +01:00
Simon Zeni
2bc71d19d4 ci: update dalligi upstream repo
(cherry picked from commit 67ce318b1f)
2026-03-06 09:55:32 -05:00
Simon Ser
8c4a74717f render/vulkan: fix missing DMA-BUF implicit write fence for render buffer
Same as previous commit for the read side, but this one waits for
all readers to be done before starting to write.

(cherry picked from commit 2367d78c3c)
2026-03-06 09:54:10 -05:00
Simon Ser
6fee18f373 render/vulkan: add "acquire" to vulkan_sync_foreign_texture()
Makes it more obvious that this is about the acquire side, not the
release side.

(cherry picked from commit 8c8d6363a1)
2026-03-06 09:49:25 -05:00
Simon Ser
a34411c2fe render/vulkan: introduce buffer_export_sync_file()
Same as buffer_import_sync_file(), but for the export side.

(cherry picked from commit ff4ce12179)
2026-03-06 09:49:18 -05:00
Simon Ser
f7e7d8f183 render/vulkan: fix missing DMA-BUF implicit read fence for textures
When we're reading from a DMA-BUF texture using implicit sync, we
need to (1) wait for any writer to be done and (2) prevent any
writers from mutating the texture while we're still reading. We
were doing (1) but not (2).

Fix this by calling dmabuf_import_sync_file() with DMA_BUF_SYNC_READ
for all DMA-BUF textures we've used in the render pass.

(cherry picked from commit 43b37e34d6)
2026-03-06 09:49:12 -05:00
Simon Ser
004806fae2 render/vulkan: take render pass in vulkan_sync_render_buffer()
We'll need to grab textures from there in the next commit.

Also rename it to better reflect what it does: synchronize release
fences after a render pass has been submitted.

(cherry picked from commit 73bbad8433)
2026-03-06 09:49:03 -05:00
Simon Ser
4080e2f627 render/vulkan: introduce buffer_import_sync_file()
Will be used in two spots in a following commit.

(cherry picked from commit a6e5807e86)
2026-03-06 09:48:54 -05:00
Wang Yu
d834de6167 xwayland: fix memory leak on pipe() failure
When pipe() fails in xwm_selection_send_data(), the function
returns without cleaning up the allocated transfer structure
and initialized wl_array. This causes a memory leak.

Add wl_array_release() and free() to clean up resources when
pipe() fails.

Signed-off-by: Wang Yu <wangyu@uniontech.com>
(cherry picked from commit a55b85e2e1)
2026-03-06 09:48:36 -05:00
Andri Yngvason
0f9a1f1443 image_capture_source/output: Update constraints on enable
Without observing the enable event, clients receive no pixel formats and
buffer dimensions are reported as 0 after an output has been re-enabled.

(cherry picked from commit 3336d28813)
2026-03-06 09:48:24 -05:00
Simon Ser
0280a03136 backend/libinput: guard against new enum entries
When libinput introduces new enum entries, we'd abort or send bogus
events to the compositor. Instead, log a message and ignore the
event.

Keep all enums without a default case so that the compiler warns
when we're missing a case.

(cherry picked from commit 884d29e5f3)
2026-02-23 09:46:32 -05:00
Aleksei Bavshin
29bba098bd backend/libinput: add support for LIBINPUT_SWITCH_KEYPAD_SLIDE
(cherry picked from commit 3676ab4df0)
2026-02-23 09:46:20 -05:00
Aleksei Bavshin
31dc115b9f backend/libinput: fix build with libinput 1.31
(cherry picked from commit c1452d8811)
2026-02-23 09:46:09 -05:00
Kenny Levinsen
11f5ba8bf2 backend/drm: Close non-master drm fd on failure
If we are not able to prepare the fd for non-master usage, close the fd
before returning an error.

(cherry picked from commit 1efb216c6d)
2026-02-23 09:37:00 -05:00
Simon Ser
b858230394 tinywl: fix duplicate object files passed to linker
On BSD make, $> is an alias for $^. On both GNU and BSD make, $^
is supported. Specifying both resulted in duplicate object files
passed to the linker:

    ld: error: duplicate symbol: main
    >>> defined at tinywl.c:887
    >>>            tinywl.o:(main)
    >>> defined at tinywl.c:887
    >>>            tinywl.o:(.text+0x0)
    cc: error: linker command failed with exit code 1 (use -v to see invocation)

Only use $^ and remove $>.

(cherry picked from commit 322291cdcf)
2026-01-26 10:05:30 -05:00
liupeng
b08af09626 backend/session: respond to event hangup or error
Signed-off-by: liupeng <liupeng01@kylinos.cn>
(cherry picked from commit 0ad8395ae6)
2026-01-26 10:02:17 -05:00
John Lindgren
4279ee5091 render/allocator: add missing wlr_buffer_finish() in destroy impls
Fixes use-after-free on exit of labwc running nested:

==50906== Invalid write of size 8
==50906==    at 0x4A85403: wl_list_remove (wayland-util.c:57)
==50906==    by 0x40BBAF9: destroy_wl_buffer (output.c:146)
==50906==    by 0x40B9B4F: backend_destroy (backend.c:488)
==50906==    by 0x409E96F: wlr_backend_destroy (backend.c:68)
==50906==    by 0x40B78A6: multi_backend_destroy (backend.c:62)
==50906==    by 0x409E96F: wlr_backend_destroy (backend.c:68)
==50906==    by 0x4043DA0: server_finish (server.c:788)
==50906==    by 0x403AA85: main (main.c:277)
==50906==  Address 0xb4435e8 is 40 bytes inside a block of size 136 free'd
==50906==    at 0x4A3E8EF: free (vg_replace_malloc.c:989)
==50906==    by 0x409C954: buffer_destroy (shm.c:28)
==50906==    by 0x40E96F4: buffer_consider_destroy (buffer.c:42)
==50906==    by 0x40E9754: wlr_buffer_drop (buffer.c:52)
==50906==    by 0x41498DA: slot_reset (swapchain.c:44)
==50906==    by 0x4149933: wlr_swapchain_destroy (swapchain.c:53)
==50906==    by 0x40CB1FA: wlr_output_finish (output.c:410)
==50906==    by 0x40BE00B: output_destroy (output.c:957)
==50906==    by 0x40CB2FC: wlr_output_destroy (output.c:436)
==50906==    by 0x40B9AFC: backend_destroy (backend.c:481)
==50906==    by 0x409E96F: wlr_backend_destroy (backend.c:68)
==50906==    by 0x40B78A6: multi_backend_destroy (backend.c:62)
==50906==  Block was alloc'd at
==50906==    at 0x4A42C13: calloc (vg_replace_malloc.c:1675)
==50906==    by 0x409CA84: allocator_create_buffer (shm.c:68)
==50906==    by 0x409C7BA: wlr_allocator_create_buffer (allocator.c:186)
==50906==    by 0x4149B80: wlr_swapchain_acquire (swapchain.c:102)
==50906==    by 0x40C90DA: render_cursor_buffer (cursor.c:246)
==50906==    by 0x40C93DC: output_cursor_attempt_hardware (cursor.c:303)
==50906==    by 0x40C9A61: output_cursor_set_texture (cursor.c:420)
==50906==    by 0x40C9738: wlr_output_cursor_set_buffer (cursor.c:352)
==50906==    by 0x40F13A0: output_cursor_set_xcursor_image (wlr_cursor.c:507)
==50906==    by 0x40F1B28: cursor_output_cursor_update (wlr_cursor.c:630)
==50906==    by 0x40F1C2A: cursor_update_outputs (wlr_cursor.c:657)
==50906==    by 0x40F1CF9: wlr_cursor_set_xcursor (wlr_cursor.c:674)

Fixes: 7963ba6a0d
("buffer: introduce wlr_buffer_finish()")

(cherry picked from commit 16cb509a6e)
2026-01-26 10:02:06 -05:00
Dale Turner
aabe351207 Add "const" to eliminate "error: initialization discards ‘const’ qualifier from pointer target type"
(cherry picked from commit 47486545b1)
2026-01-26 10:01:52 -05:00
David96
878aebfb74 wlr_virtual_pointer: Set axis source on all axis
Currently it is possible to crash a wlroots compositor by setting any
axis source other than 0 and sending an axis event in the HORIZONTAL
direction from wlr_virtual_pointer since the axis source is only set on
the first axis.
This then hits the assert in wlr_seat_pointer.c:332.

Fix by always setting the source on all axis.

(cherry picked from commit aef84f0e4d)
2026-01-26 10:01:16 -05:00
Simon Ser
8c9e6b7c9f build: bump version to 0.19.2 2025-10-22 00:21:53 +02:00
Simon Ser
e432b7bd1c ci: fix VKMS lookup after faux bus migration
VKMS has been migrated to the new faux bus. This causes breakage
in CI, because we used the platform bus to find the right device.

udev hasn't been updated yet to support the faux bus, so just use
sysfs instead.
2025-10-21 10:32:03 -04:00
David Turner
ea1ade5e5d xwm: Fix double-close
When an FD is passed to xcb_connect_to_fd(), xcb takes ownership of that
FD and is responsible for closing it, which it does when
xcb_disconnect() is called.  But the xwayland handler code also keeps a
copy of the FD and closes it via safe_close() in
server_finish_process().

This double-close can cause all sorts of problems if another part of
wlroots allocates another FD between the two closes - the latter close
will close the wrong FD and things go horribly wrong (in my case leading
to use-after-free and segfaults).

Fix this by setting wm_fd[0]=-1 after calling xwm_create(), and ensuring
that xwm_create() closes the FD if startup errors occur.

(cherry picked from commit 879243e370)
2025-10-21 10:25:40 -04:00
Simon Ser
f56a69aa76 linux_drm_syncobj_v1: fix use-after-free in surface_commit_destroy()
surface_commit_destroy() accesses a field from
struct wlr_linux_drm_syncobj_surface_v1, however that struct may have
been free'd earlier:

    ==1103==ERROR: AddressSanitizer: heap-use-after-free on address 0x7cdef7a6e288 at pc 0x7feefaac335a bp 0x7ffc4de8f570 sp 0x7ffc4de8f560
    READ of size 8 at 0x7cdef7a6e288 thread T0
        #0 0x7feefaac3359 in surface_commit_destroy ../subprojects/wlroots/types/wlr_linux_drm_syncobj_v1.c:195
        #1 0x7feefaac34cd in surface_commit_handle_surface_destroy ../subprojects/wlroots/types/wlr_linux_drm_syncobj_v1.c:211
        #2 0x7feefbd194cf in wl_signal_emit_mutable (/usr/lib/libwayland-server.so.0+0x84cf) (BuildId: b9664217748f523995e3f855fa197cf8e59942d1)
        #3 0x7feefaa52b22 in surface_handle_resource_destroy ../subprojects/wlroots/types/wlr_compositor.c:730
        #4 0x7feefbd1bb9f  (/usr/lib/libwayland-server.so.0+0xab9f) (BuildId: b9664217748f523995e3f855fa197cf8e59942d1)
        #5 0x7feefaa46a18 in surface_handle_destroy ../subprojects/wlroots/types/wlr_compositor.c:65
        #6 0x7feef89afac5  (/usr/lib/libffi.so.8+0x7ac5) (BuildId: d5e3b0d8921923f35438adefa9f864745abc5e90)
        #7 0x7feef89ac76a  (/usr/lib/libffi.so.8+0x476a) (BuildId: d5e3b0d8921923f35438adefa9f864745abc5e90)
        #8 0x7feef89af06d in ffi_call (/usr/lib/libffi.so.8+0x706d) (BuildId: d5e3b0d8921923f35438adefa9f864745abc5e90)
        #9 0x7feefbd17531  (/usr/lib/libwayland-server.so.0+0x6531) (BuildId: b9664217748f523995e3f855fa197cf8e59942d1)
        #10 0x7feefbd1cd2f  (/usr/lib/libwayland-server.so.0+0xbd2f) (BuildId: b9664217748f523995e3f855fa197cf8e59942d1)
        #11 0x7feefbd1b181 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa181) (BuildId: b9664217748f523995e3f855fa197cf8e59942d1)
        #12 0x7feefbd1d296 in wl_display_run (/usr/lib/libwayland-server.so.0+0xc296) (BuildId: b9664217748f523995e3f855fa197cf8e59942d1)
        #13 0x555bf0a55a40 in server_run ../sway/server.c:615
        #14 0x555bf0a4a654 in main ../sway/main.c:376
        #15 0x7feef9227674  (/usr/lib/libc.so.6+0x27674) (BuildId: 4fe011c94a88e8aeb6f2201b9eb369f42b4a1e9e)
        #16 0x7feef9227728 in __libc_start_main (/usr/lib/libc.so.6+0x27728) (BuildId: 4fe011c94a88e8aeb6f2201b9eb369f42b4a1e9e)
        #17 0x555bf0a03f54 in _start (/home/leo/code/stuff/sway/build/sway/sway+0x390f54) (BuildId: e3d4e653af1aa0885f0426c403e16fc87c086d33)

    0x7cdef7a6e288 is located 8 bytes inside of 176-byte region [0x7cdef7a6e280,0x7cdef7a6e330)
    freed by thread T0 here:
        #0 0x7feefb71f79d in free /usr/src/debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:51
        #1 0x7feefaac29f1 in surface_destroy ../subprojects/wlroots/types/wlr_linux_drm_syncobj_v1.c:84
        #2 0x7feefaac2e47 in surface_handle_resource_destroy ../subprojects/wlroots/types/wlr_linux_drm_syncobj_v1.c:143
        #3 0x7feefbd1bb9f  (/usr/lib/libwayland-server.so.0+0xab9f) (BuildId: b9664217748f523995e3f855fa197cf8e59942d1)
        #4 0x7feefaac2a12 in surface_handle_destroy ../subprojects/wlroots/types/wlr_linux_drm_syncobj_v1.c:89
        #5 0x7feef89afac5  (/usr/lib/libffi.so.8+0x7ac5) (BuildId: d5e3b0d8921923f35438adefa9f864745abc5e90)

    previously allocated by thread T0 here:
        #0 0x7feefb7205dd in calloc /usr/src/debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:74
        #1 0x7feefaac4abd in manager_handle_get_surface ../subprojects/wlroots/types/wlr_linux_drm_syncobj_v1.c:313
        #2 0x7feef89afac5  (/usr/lib/libffi.so.8+0x7ac5) (BuildId: d5e3b0d8921923f35438adefa9f864745abc5e90)

Fix this by storing the struct wlr_surface in the field.

Closes: https://github.com/swaywm/sway/issues/8917
(cherry picked from commit 6d63871f05)
2025-10-21 10:25:29 -04:00
tokyo4j
8fc64ae8d5 util/box.c: use 1/256 instead of 1/65536 in wlr_box_closest_point()
This fixes the issue that a scrollbar in a maximized GTK/Chromium window
cannot be dragged when cursor is on the right/bottom edge of the output.

The issue was caused by rounding in `wl_fixed_from_double()` ([1]); if
`wlr_cursor_move()` constrains the x-position of the cursor to
`(output width)-1/65536`, `wl_fixed_from_double()` converts it to just
`(output width)`, which is perceived as outside of the window by
GTK/Chromium.

Using 1/256 (minimal unit of `wl_fixed_t`) instead of 1/65536 avoids
this rounding issue.

[1]: f246e619d1

(cherry picked from commit 19c5d22beb)
2025-10-21 10:25:18 -04:00
Simon Ser
761927bbbd backend/session: fix crash on udev device remove event
libwayland adds phantom listeners here:
d81525a235/src/wayland-server.c (L2378)

Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3982
(cherry picked from commit 406aa5f7f5)
2025-10-21 10:25:02 -04:00
JiDe Zhang
0d20e46498 xwayland: fix assertion failure in wlr_xwayland_shell_v1
The issue occurred when `wlr_xwayland_shell_v1` was destroyed before
`wlr_xwayland`. This happened because `wlr_xwayland` didn't remove the
listener for the shell's destroy event in `handle_shell_destroy`.

(cherry picked from commit d7ae9a866b)
2025-09-22 16:00:32 -04:00
Simon Ser
eba71d59d4 backend, output: send commit events after applying all in wlr_backend_commit()
We were iterating over involved outputs, applying the new state and
sending the commit event for each one. This resulted in commit
events being fired while we weren't done applying the new state for
all outputs.

Fix this by first applying all of the states, then firing all of
the events.

Closes: https://github.com/swaywm/sway/issues/8829
(cherry picked from commit 7392b3313a)
2025-09-22 16:00:23 -04:00
Simon Ser
9b42c1901d build: bump version to 0.19.1 2025-09-21 23:03:29 +02:00
Kenny Levinsen
7a52788929 render/vulkan: Handle multi-descriptor sets
A combined image sampler may need several descriptors in a descriptor
set. We are not currently checking how many descriptors are required,
nor is it presumably guaranteed that such multi-descriptor allocation
will not fail due to fragmentation.

If the pool free counter is not zero, try to allocate but continue with
the next pool and fall back to creating a new pool if the allocation
failed.

Fixes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/4010
(cherry picked from commit dd7f543189)
2025-09-21 23:03:09 +02:00
Simon Ser
d4009183a1 cursor: use source buffer to signal release timeline point
Same as 128cd07e91 ("scene/surface: use source buffer to signal
release timeline point"), but for the cursor.

(cherry picked from commit 462046ffdc)
2025-09-11 09:13:42 -04:00
Simon Ser
d092e40dec scene/surface: fix NULL deref when source buffer is destroyed
Fixes the following crash, witnessed after a GPU reset:

    #0  0x00007fba9a32774c n/a (libc.so.6 + 0x9774c)
    #1  0x00007fba9a2cddc0 raise (libc.so.6 + 0x3ddc0)
    #2  0x00007fba9a2b557a abort (libc.so.6 + 0x2557a)
    #3  0x00007fba9a2b54e3 n/a (libc.so.6 + 0x254e3)
    #4  0x00007fba9a53fb78 wlr_linux_drm_syncobj_v1_state_signal_release_with_buffer (libwlroots-0.20.so + 0x26b78)
    #5  0x00007fba9a590846 surface_reconfigure (libwlroots-0.20.so + 0x77846)
    #6  0x00007fba9a590cbb scene_surface_set_clip (libwlroots-0.20.so + 0x77cbb)
    #7  0x00007fba9a590efa subsurface_tree_set_clip (libwlroots-0.20.so + 0x77efa)
    #8  0x00007fba9a590f1f subsurface_tree_set_clip (libwlroots-0.20.so + 0x77f1f)
    #9  0x00007fba9a590f1f subsurface_tree_set_clip (libwlroots-0.20.so + 0x77f1f)
    #10 0x00007fba9a590f8d wlr_scene_subsurface_tree_set_clip (libwlroots-0.20.so + 0x77f8d)

Reported-by: Hubert Hirtz <hubert@hirtz.pm>
(cherry picked from commit bd566225ea)
2025-09-11 09:13:35 -04:00
Simon Ser
bb5180ce9e scene/surface: simplify single-pixel-buffer check in surface_reconfigure()
No need to call wlr_client_buffer_get() on wlr_client_buffer.base:
we're already manipulating a wlr_client_buffer.

(cherry picked from commit b62c6878e1)
2025-09-11 09:13:29 -04:00
Simon Ser
73aa61686f output/cursor: fix missing second cursor
When attaching more than one cursor to wlr_output, the first one
will pick the output's hardware cursor, then for the second one
output_set_hardware_cursor() would fail (since the hardware cursor
was already taken), but we still ended up resetting the current
hardware cursor (by calling output_disable_hardware_cursor() below).
As a result only the second cursor would be displayed.

To fix this, move the current hardware cursor check to the caller.

Fixes: 510664e79b ("output: disable hardware cursor when falling back to software")
(cherry picked from commit fd069ad4f2)
2025-09-11 09:13:11 -04:00
liupeng
9079380498 drm_lease_v1: initialize device resource link during abnormal exit
Signed-off-by: liupeng <liupeng01@kylinos.cn>
(cherry picked from commit 5e5842cb1a)
2025-09-11 09:13:01 -04:00
Simon Zeni
3118ca5c3e drm-lease-v1: remove connector active_lease & lease connectors
Upon leasing, the wlr_drm_lease_connector_v1 will be automatically clean up by the wlr_output
destroy handler. There is no need for the wlr_drm_lease_manager to keep track of leased connectors.

(cherry picked from commit 0166fd9eb7)
2025-09-11 09:12:49 -04:00
liupeng
c1938f79c3 cursor: update output cursor even if output is disabled
During suspend, we first disable output and then remove the input device.
This causes cursor->state->surface released while cursor->texture leaves.
Which leads to use-after-free after resume.

(cherry picked from commit be5e266211)
2025-08-27 13:44:35 -04:00
Jesper Jensen
aa904ccf06 output/cursor: Fix double cursor bug
When we fail to render the cursor (in my case because the cursor is too
large) we bail out of the output_cursor_attempt_hardware function. This
causes output_cursor_set_texture to clean up after us, but we've already
cleared the hardware_cursor, and so output_disable_hardware_cursor
thinks we don't have a hardware cursor to disable.

We shouldn't modify the hardware_cursor variable before we've
successfully changed the hardware cursor, this way the caller can clean
up after us like it expect to.

This was brought up by an actual bug when playing the game Kaizen. Which
uses oddly sized cursors, that fell back to software cursors for me, and
left the hardware cursor hanging around. This change has been tested to
fix that.

During the testing of this change, I have noticed that the previous code
worked fine the first time the cursor was switch to software. It only
failed on subsequent attempts. I haven't figured out why that is.

(cherry picked from commit 07e92fb868)
2025-08-27 13:44:22 -04:00
Andri Yngvason
52e1ad01e3 ext-image-capture-source: output: Apply transform to cursor
The cursor can be expected to also be transformed if the output is
transformed.

(cherry picked from commit 80c7e0f772)
2025-08-27 13:44:11 -04:00
Consolatis
30c0602457 transient_seat: initialize seat destroy listener
This fixes a `wl_list_remove()` from an uninitialized listener
when using `wlr_transient_seat_v1_deny()` in a `create_seat`
handler.

(cherry picked from commit c39b3ce7a3)
2025-08-27 13:43:58 -04:00
tokyo4j
b7205866c0 backend/libinput: don't leak udev_device
(cherry picked from commit 170f7e0706)
2025-07-10 09:45:17 -04:00
DreamMaoMao
f935404e68 render/pass: Ensure the precision is consistent during comparison
(cherry picked from commit a08acfcee0)
2025-07-10 09:44:47 -04:00
David Turner
5aa8c192a5 scene: Block damage on single-pixel buffer textures
We cache whether buffers are single-pixel buffers (and if so what color
they are) to allow rendering optimizations.  But this breaks if the
client changes out the single-pixel buffer for one with a different
color, because this updates the texture in-place instead of actually
changing the buffer.

We can fix this by blocking in-place texture updates for single pixel
buffers.

Original bug: https://codeberg.org/ifreund/waylock/issues/121
See also: !5092

(cherry picked from commit 58c3680d96)
2025-07-10 09:44:28 -04:00
Simon Ser
68dea55970 render/egl: fix software rendering check
Commit b4ce0d8b39 ("render/egl: accept negative DRM FD to select
software rendering") added an EXT_device_drm check to figure out
whether the user selected a device with a DRM FD or without one.
However, for KMS-only devices, Mesa will never advertise the
selected KMS node:
3f1d40d230/src/egl/main/egldevice.c (L109)

Instead, pass down a parameter to indicate whether a DRM FD was
passed in.

Fixes: b4ce0d8b39 ("render/egl: accept negative DRM FD to select software rendering")
(cherry picked from commit 48bd1831fe)
2025-07-10 09:44:10 -04:00
Isaac Freund
f3fe6b9a43 util/box: set dest to empty if boxes don't intersect
Currently if both box_a and box_b are non-empty but do not intersect,
this function does not set dest to an empty box. This contradicts the
doc comments and is surprising for users.

(cherry picked from commit f5e7caf599)
2025-06-23 10:53:22 -04:00
40 changed files with 463 additions and 262 deletions

View file

@ -41,9 +41,10 @@ tasks:
cd wlroots/build-gcc/tinywl
sudo modprobe vkms
udevadm settle
card="/dev/dri/$(ls /sys/devices/faux/vkms/drm/ | grep ^card)"
export WLR_BACKENDS=drm
export WLR_RENDERER=pixman
export WLR_DRM_DEVICES=/dev/dri/by-path/platform-vkms-card
export WLR_DRM_DEVICES="$card"
export UBSAN_OPTIONS=halt_on_error=1
sudo chmod ugo+rw /dev/dri/by-path/platform-vkms-card
sudo chmod ugo+rw "$card"
sudo -E seatd-launch -- ./tinywl -s 'kill $PPID' || [ $? = 143 ]

View file

@ -1,4 +1,4 @@
include: https://git.sr.ht/~emersion/dalligi/blob/master/templates/multi.yml
include: https://gitlab.freedesktop.org/emersion/dalligi/-/raw/master/templates/multi.yml
alpine:
extends: .dalligi
pages: true

View file

@ -485,5 +485,10 @@ bool wlr_backend_commit(struct wlr_backend *backend,
output_apply_commit(state->output, &state->base);
}
for (size_t i = 0; i < states_len; i++) {
const struct wlr_backend_output_state *state = &states[i];
output_send_commit_event(state->output, &state->base);
}
return true;
}

View file

@ -2085,6 +2085,7 @@ int wlr_drm_backend_get_non_master_fd(struct wlr_backend *backend) {
if (drmIsMaster(fd) && drmDropMaster(fd) < 0) {
wlr_log_errno(WLR_ERROR, "Failed to drop master");
close(fd);
return -1;
}

View file

@ -249,3 +249,15 @@ void handle_libinput_event(struct wlr_libinput_backend *backend,
break;
}
}
bool button_state_from_libinput(enum libinput_button_state state, enum wlr_button_state *out) {
switch (state) {
case LIBINPUT_BUTTON_STATE_RELEASED:
*out = WLR_BUTTON_RELEASED;
return true;
case LIBINPUT_BUTTON_STATE_PRESSED:
*out = WLR_BUTTON_PRESSED;
return true;
}
return false;
}

View file

@ -2,6 +2,7 @@
#include <libinput.h>
#include <stdlib.h>
#include <wlr/interfaces/wlr_keyboard.h>
#include <wlr/util/log.h>
#include "backend/libinput.h"
struct wlr_libinput_input_device *device_from_keyboard(
@ -30,6 +31,18 @@ void init_device_keyboard(struct wlr_libinput_input_device *dev) {
libinput_device_led_update(dev->handle, 0);
}
static bool key_state_from_libinput(enum libinput_key_state state, enum wl_keyboard_key_state *out) {
switch (state) {
case LIBINPUT_KEY_STATE_RELEASED:
*out = WL_KEYBOARD_KEY_STATE_RELEASED;
return true;
case LIBINPUT_KEY_STATE_PRESSED:
*out = WL_KEYBOARD_KEY_STATE_PRESSED;
return true;
}
return false;
}
void handle_keyboard_key(struct libinput_event *event,
struct wlr_keyboard *kb) {
struct libinput_event_keyboard *kbevent =
@ -39,13 +52,9 @@ void handle_keyboard_key(struct libinput_event *event,
.keycode = libinput_event_keyboard_get_key(kbevent),
.update_state = true,
};
switch (libinput_event_keyboard_get_key_state(kbevent)) {
case LIBINPUT_KEY_STATE_RELEASED:
wlr_event.state = WL_KEYBOARD_KEY_STATE_RELEASED;
break;
case LIBINPUT_KEY_STATE_PRESSED:
wlr_event.state = WL_KEYBOARD_KEY_STATE_PRESSED;
break;
if (!key_state_from_libinput(libinput_event_keyboard_get_key_state(kbevent), &wlr_event.state)) {
wlr_log(WLR_DEBUG, "Unhandled libinput key state");
return;
}
wlr_keyboard_notify_key(kb, &wlr_event);
}

View file

@ -29,3 +29,7 @@ features += { 'libinput-backend': true }
wlr_deps += libinput
internal_config.set10('HAVE_LIBINPUT_BUSTYPE', libinput.version().version_compare('>=1.26.0'))
internal_config.set10(
'HAVE_LIBINPUT_SWITCH_KEYPAD_SLIDE',
libinput.version().version_compare('>=1.30.901')
)

View file

@ -1,6 +1,7 @@
#include <assert.h>
#include <libinput.h>
#include <wlr/interfaces/wlr_pointer.h>
#include <wlr/util/log.h>
#include "backend/libinput.h"
const struct wlr_pointer_impl libinput_pointer_impl = {
@ -52,6 +53,38 @@ void handle_pointer_motion_abs(struct libinput_event *event,
wl_signal_emit_mutable(&pointer->events.frame, pointer);
}
static bool pointer_button_state_from_libinput(enum libinput_button_state state,
enum wl_pointer_button_state *out) {
switch (state) {
case LIBINPUT_BUTTON_STATE_PRESSED:
*out = WL_POINTER_BUTTON_STATE_PRESSED;
return true;
case LIBINPUT_BUTTON_STATE_RELEASED:
*out = WL_POINTER_BUTTON_STATE_RELEASED;
return true;
}
return false;
}
static bool axis_source_from_libinput(enum libinput_pointer_axis_source source,
enum wl_pointer_axis_source *out) {
switch (source) {
case LIBINPUT_POINTER_AXIS_SOURCE_WHEEL:
*out = WL_POINTER_AXIS_SOURCE_WHEEL;
return true;
case LIBINPUT_POINTER_AXIS_SOURCE_FINGER:
*out = WL_POINTER_AXIS_SOURCE_FINGER;
return true;
case LIBINPUT_POINTER_AXIS_SOURCE_CONTINUOUS:
*out = WL_POINTER_AXIS_SOURCE_CONTINUOUS;
return true;
case LIBINPUT_POINTER_AXIS_SOURCE_WHEEL_TILT:
*out = WL_POINTER_AXIS_SOURCE_WHEEL_TILT;
return true;
}
return false;
}
void handle_pointer_button(struct libinput_event *event,
struct wlr_pointer *pointer) {
struct libinput_event_pointer *pevent =
@ -61,13 +94,10 @@ void handle_pointer_button(struct libinput_event *event,
.time_msec = usec_to_msec(libinput_event_pointer_get_time_usec(pevent)),
.button = libinput_event_pointer_get_button(pevent),
};
switch (libinput_event_pointer_get_button_state(pevent)) {
case LIBINPUT_BUTTON_STATE_PRESSED:
wlr_event.state = WL_POINTER_BUTTON_STATE_PRESSED;
break;
case LIBINPUT_BUTTON_STATE_RELEASED:
wlr_event.state = WL_POINTER_BUTTON_STATE_RELEASED;
break;
if (!pointer_button_state_from_libinput(libinput_event_pointer_get_button_state(pevent),
&wlr_event.state)) {
wlr_log(WLR_DEBUG, "Unhandled libinput button state");
return;
}
wlr_pointer_notify_button(pointer, &wlr_event);
wl_signal_emit_mutable(&pointer->events.frame, pointer);
@ -81,19 +111,9 @@ void handle_pointer_axis(struct libinput_event *event,
.pointer = pointer,
.time_msec = usec_to_msec(libinput_event_pointer_get_time_usec(pevent)),
};
switch (libinput_event_pointer_get_axis_source(pevent)) {
case LIBINPUT_POINTER_AXIS_SOURCE_WHEEL:
wlr_event.source = WL_POINTER_AXIS_SOURCE_WHEEL;
break;
case LIBINPUT_POINTER_AXIS_SOURCE_FINGER:
wlr_event.source = WL_POINTER_AXIS_SOURCE_FINGER;
break;
case LIBINPUT_POINTER_AXIS_SOURCE_CONTINUOUS:
wlr_event.source = WL_POINTER_AXIS_SOURCE_CONTINUOUS;
break;
case LIBINPUT_POINTER_AXIS_SOURCE_WHEEL_TILT:
wlr_event.source = WL_POINTER_AXIS_SOURCE_WHEEL_TILT;
break;
if (!axis_source_from_libinput(libinput_event_pointer_get_axis_source(pevent), &wlr_event.source)) {
wlr_log(WLR_DEBUG, "Unhandled libinput pointer axis source");
return;
}
const enum libinput_pointer_axis axes[] = {
LIBINPUT_POINTER_AXIS_SCROLL_VERTICAL,

View file

@ -1,7 +1,9 @@
#include <assert.h>
#include <libinput.h>
#include <wlr/interfaces/wlr_switch.h>
#include <wlr/util/log.h>
#include "backend/libinput.h"
#include "config.h"
const struct wlr_switch_impl libinput_switch_impl = {
.name = "libinput-switch",
@ -22,28 +24,49 @@ struct wlr_libinput_input_device *device_from_switch(
return dev;
}
static bool switch_type_from_libinput(enum libinput_switch type, enum wlr_switch_type *out) {
switch (type) {
case LIBINPUT_SWITCH_LID:
*out = WLR_SWITCH_TYPE_LID;
return true;
case LIBINPUT_SWITCH_TABLET_MODE:
*out = WLR_SWITCH_TYPE_TABLET_MODE;
return true;
#if HAVE_LIBINPUT_SWITCH_KEYPAD_SLIDE
case LIBINPUT_SWITCH_KEYPAD_SLIDE:
*out = WLR_SWITCH_TYPE_KEYPAD_SLIDE;
return true;
#endif
}
return false;
}
static bool switch_state_from_libinput(enum libinput_switch_state state, enum wlr_switch_state *out) {
switch (state) {
case LIBINPUT_SWITCH_STATE_OFF:
*out = WLR_SWITCH_STATE_OFF;
return true;
case LIBINPUT_SWITCH_STATE_ON:
*out = WLR_SWITCH_STATE_ON;
return true;
}
return false;
}
void handle_switch_toggle(struct libinput_event *event,
struct wlr_switch *wlr_switch) {
struct libinput_event_switch *sevent =
libinput_event_get_switch_event (event);
libinput_event_get_switch_event(event);
struct wlr_switch_toggle_event wlr_event = {
.time_msec = usec_to_msec(libinput_event_switch_get_time_usec(sevent)),
};
switch (libinput_event_switch_get_switch(sevent)) {
case LIBINPUT_SWITCH_LID:
wlr_event.switch_type = WLR_SWITCH_TYPE_LID;
break;
case LIBINPUT_SWITCH_TABLET_MODE:
wlr_event.switch_type = WLR_SWITCH_TYPE_TABLET_MODE;
break;
if (!switch_type_from_libinput(libinput_event_switch_get_switch(sevent), &wlr_event.switch_type)) {
wlr_log(WLR_DEBUG, "Unhandled libinput switch type");
return;
}
switch (libinput_event_switch_get_switch_state(sevent)) {
case LIBINPUT_SWITCH_STATE_OFF:
wlr_event.switch_state = WLR_SWITCH_STATE_OFF;
break;
case LIBINPUT_SWITCH_STATE_ON:
wlr_event.switch_state = WLR_SWITCH_STATE_ON;
break;
if (!switch_state_from_libinput(libinput_event_switch_get_switch_state(sevent), &wlr_event.switch_state)) {
wlr_log(WLR_DEBUG, "Unhandled libinput switch state");
return;
}
wl_signal_emit_mutable(&wlr_switch->events.toggle, &wlr_event);
}

View file

@ -104,6 +104,7 @@ void init_device_tablet_pad(struct wlr_libinput_input_device *dev) {
struct udev_device *udev = libinput_device_get_udev_device(handle);
char **dst = wl_array_add(&wlr_tablet_pad->paths, sizeof(char *));
*dst = strdup(udev_device_get_syspath(udev));
udev_device_unref(udev);
int groups = libinput_device_tablet_pad_get_num_mode_groups(handle);
for (int i = 0; i < groups; ++i) {
@ -147,13 +148,9 @@ void handle_tablet_pad_button(struct libinput_event *event,
.group = libinput_tablet_pad_mode_group_get_index(
libinput_event_tablet_pad_get_mode_group(pevent)),
};
switch (libinput_event_tablet_pad_get_button_state(pevent)) {
case LIBINPUT_BUTTON_STATE_PRESSED:
wlr_event.state = WLR_BUTTON_PRESSED;
break;
case LIBINPUT_BUTTON_STATE_RELEASED:
wlr_event.state = WLR_BUTTON_RELEASED;
break;
if (!button_state_from_libinput(libinput_event_tablet_pad_get_button_state(pevent), &wlr_event.state)) {
wlr_log(WLR_DEBUG, "Unhandled libinput button state");
return;
}
wl_signal_emit_mutable(&tablet_pad->events.button, &wlr_event);
}
@ -167,6 +164,7 @@ void handle_tablet_pad_ring(struct libinput_event *event,
.ring = libinput_event_tablet_pad_get_ring_number(pevent),
.position = libinput_event_tablet_pad_get_ring_position(pevent),
.mode = libinput_event_tablet_pad_get_mode(pevent),
.source = WLR_TABLET_PAD_RING_SOURCE_UNKNOWN,
};
switch (libinput_event_tablet_pad_get_ring_source(pevent)) {
case LIBINPUT_TABLET_PAD_RING_SOURCE_UNKNOWN:
@ -188,6 +186,7 @@ void handle_tablet_pad_strip(struct libinput_event *event,
.strip = libinput_event_tablet_pad_get_strip_number(pevent),
.position = libinput_event_tablet_pad_get_strip_position(pevent),
.mode = libinput_event_tablet_pad_get_mode(pevent),
.source = WLR_TABLET_PAD_STRIP_SOURCE_UNKNOWN,
};
switch (libinput_event_tablet_pad_get_strip_source(pevent)) {
case LIBINPUT_TABLET_PAD_STRIP_SOURCE_UNKNOWN:

View file

@ -37,6 +37,7 @@ void init_device_tablet(struct wlr_libinput_input_device *dev) {
struct udev_device *udev = libinput_device_get_udev_device(dev->handle);
char **dst = wl_array_add(&wlr_tablet->paths, sizeof(char *));
*dst = strdup(udev_device_get_syspath(udev));
udev_device_unref(udev);
wl_list_init(&dev->tablet_tools);
}
@ -67,27 +68,61 @@ struct wlr_libinput_input_device *device_from_tablet(
return dev;
}
static enum wlr_tablet_tool_type wlr_type_from_libinput_type(
enum libinput_tablet_tool_type value) {
switch (value) {
static bool type_from_libinput(enum libinput_tablet_tool_type type,
enum wlr_tablet_tool_type *out) {
switch (type) {
case LIBINPUT_TABLET_TOOL_TYPE_PEN:
return WLR_TABLET_TOOL_TYPE_PEN;
*out = WLR_TABLET_TOOL_TYPE_PEN;
return true;
case LIBINPUT_TABLET_TOOL_TYPE_ERASER:
return WLR_TABLET_TOOL_TYPE_ERASER;
*out = WLR_TABLET_TOOL_TYPE_ERASER;
return true;
case LIBINPUT_TABLET_TOOL_TYPE_BRUSH:
return WLR_TABLET_TOOL_TYPE_BRUSH;
*out = WLR_TABLET_TOOL_TYPE_BRUSH;
return true;
case LIBINPUT_TABLET_TOOL_TYPE_PENCIL:
return WLR_TABLET_TOOL_TYPE_PENCIL;
*out = WLR_TABLET_TOOL_TYPE_PENCIL;
return true;
case LIBINPUT_TABLET_TOOL_TYPE_AIRBRUSH:
return WLR_TABLET_TOOL_TYPE_AIRBRUSH;
*out = WLR_TABLET_TOOL_TYPE_AIRBRUSH;
return true;
case LIBINPUT_TABLET_TOOL_TYPE_MOUSE:
return WLR_TABLET_TOOL_TYPE_MOUSE;
*out = WLR_TABLET_TOOL_TYPE_MOUSE;
return true;
case LIBINPUT_TABLET_TOOL_TYPE_LENS:
return WLR_TABLET_TOOL_TYPE_LENS;
*out = WLR_TABLET_TOOL_TYPE_LENS;
return true;
case LIBINPUT_TABLET_TOOL_TYPE_TOTEM:
return WLR_TABLET_TOOL_TYPE_TOTEM;
*out = WLR_TABLET_TOOL_TYPE_TOTEM;
return true;
}
abort(); // unreachable
return false;
}
static bool proximity_state_from_libinput(enum libinput_tablet_tool_proximity_state state,
enum wlr_tablet_tool_proximity_state *out) {
switch (state) {
case LIBINPUT_TABLET_TOOL_PROXIMITY_STATE_OUT:
*out = WLR_TABLET_TOOL_PROXIMITY_OUT;
return true;
case LIBINPUT_TABLET_TOOL_PROXIMITY_STATE_IN:
*out = WLR_TABLET_TOOL_PROXIMITY_IN;
return true;
}
return false;
}
static bool tip_state_from_libinput(enum libinput_tablet_tool_tip_state state,
enum wlr_tablet_tool_tip_state *out) {
switch (state) {
case LIBINPUT_TABLET_TOOL_TIP_UP:
*out = WLR_TABLET_TOOL_TIP_UP;
return true;
case LIBINPUT_TABLET_TOOL_TIP_DOWN:
*out = WLR_TABLET_TOOL_TIP_DOWN;
return true;
}
return false;
}
static struct tablet_tool *get_tablet_tool(
@ -99,14 +134,19 @@ static struct tablet_tool *get_tablet_tool(
return tool;
}
enum wlr_tablet_tool_type type;
if (!type_from_libinput(libinput_tablet_tool_get_type(libinput_tool), &type)) {
wlr_log(WLR_DEBUG, "Unhandled libinput tablet tool type");
return NULL;
}
tool = calloc(1, sizeof(*tool));
if (tool == NULL) {
wlr_log_errno(WLR_ERROR, "failed to allocate wlr_libinput_tablet_tool");
return NULL;
}
tool->wlr_tool.type = wlr_type_from_libinput_type(
libinput_tablet_tool_get_type(libinput_tool));
tool->wlr_tool.type = type;
tool->wlr_tool.hardware_serial =
libinput_tablet_tool_get_serial(libinput_tool);
tool->wlr_tool.hardware_wacom =
@ -198,14 +238,12 @@ void handle_tablet_tool_proximity(struct libinput_event *event,
.y = libinput_event_tablet_tool_get_y_transformed(tevent, 1),
};
switch (libinput_event_tablet_tool_get_proximity_state(tevent)) {
case LIBINPUT_TABLET_TOOL_PROXIMITY_STATE_OUT:
wlr_event.state = WLR_TABLET_TOOL_PROXIMITY_OUT;
break;
case LIBINPUT_TABLET_TOOL_PROXIMITY_STATE_IN:
wlr_event.state = WLR_TABLET_TOOL_PROXIMITY_IN;
break;
if (!proximity_state_from_libinput(libinput_event_tablet_tool_get_proximity_state(tevent),
&wlr_event.state)) {
wlr_log(WLR_DEBUG, "Unhandled libinput tablet tool proximity state");
return;
}
wl_signal_emit_mutable(&wlr_tablet->events.proximity, &wlr_event);
if (libinput_event_tablet_tool_get_proximity_state(tevent) ==
@ -240,14 +278,11 @@ void handle_tablet_tool_tip(struct libinput_event *event,
.y = libinput_event_tablet_tool_get_y_transformed(tevent, 1),
};
switch (libinput_event_tablet_tool_get_tip_state(tevent)) {
case LIBINPUT_TABLET_TOOL_TIP_UP:
wlr_event.state = WLR_TABLET_TOOL_TIP_UP;
break;
case LIBINPUT_TABLET_TOOL_TIP_DOWN:
wlr_event.state = WLR_TABLET_TOOL_TIP_DOWN;
break;
if (!tip_state_from_libinput(libinput_event_tablet_tool_get_tip_state(tevent), &wlr_event.state)) {
wlr_log(WLR_DEBUG, "Unhandled libinput tablet tool tip state");
return;
}
wl_signal_emit_mutable(&wlr_tablet->events.tip, &wlr_event);
}
@ -266,13 +301,11 @@ void handle_tablet_tool_button(struct libinput_event *event,
.time_msec = usec_to_msec(libinput_event_tablet_tool_get_time_usec(tevent)),
.button = libinput_event_tablet_tool_get_button(tevent),
};
switch (libinput_event_tablet_tool_get_button_state(tevent)) {
case LIBINPUT_BUTTON_STATE_RELEASED:
wlr_event.state = WLR_BUTTON_RELEASED;
break;
case LIBINPUT_BUTTON_STATE_PRESSED:
wlr_event.state = WLR_BUTTON_PRESSED;
break;
if (!button_state_from_libinput(libinput_event_tablet_tool_get_button_state(tevent), &wlr_event.state)) {
wlr_log(WLR_DEBUG, "Unhandled libinput button state");
return;
}
wl_signal_emit_mutable(&wlr_tablet->events.button, &wlr_event);
}

View file

@ -36,6 +36,15 @@ static void handle_disable_seat(struct libseat *seat, void *data) {
static int libseat_event(int fd, uint32_t mask, void *data) {
struct wlr_session *session = data;
if (mask & (WL_EVENT_HANGUP | WL_EVENT_ERROR)) {
if (mask & WL_EVENT_ERROR) {
wlr_log(WLR_ERROR, "Failed to wait for libseat event");
} else {
wlr_log(WLR_INFO, "Failed to wait for libseat event");
}
wlr_session_destroy(session);
return 0;
}
if (libseat_dispatch(session->seat_handle, 0) == -1) {
wlr_log_errno(WLR_ERROR, "Failed to dispatch libseat");
wlr_session_destroy(session);
@ -367,7 +376,10 @@ void wlr_session_close_file(struct wlr_session *session,
}
assert(wl_list_empty(&dev->events.change.listener_list));
assert(wl_list_empty(&dev->events.remove.listener_list));
// TODO: assert that the "remove" listener list is empty as well. Listeners
// will typically call wlr_session_close_file() in response, and
// wl_signal_emit_mutable() installs two phantom listeners, so we'd count
// these two.
close(dev->fd);
wl_list_remove(&dev->link);

View file

@ -132,4 +132,6 @@ void handle_tablet_pad_ring(struct libinput_event *event,
void handle_tablet_pad_strip(struct libinput_event *event,
struct wlr_tablet_pad *tablet_pad);
bool button_state_from_libinput(enum libinput_button_state state, enum wlr_button_state *out);
#endif

View file

@ -433,10 +433,11 @@ void vulkan_reset_command_buffer(struct wlr_vk_command_buffer *cb);
bool vulkan_wait_command_buffer(struct wlr_vk_command_buffer *cb,
struct wlr_vk_renderer *renderer);
bool vulkan_sync_render_buffer(struct wlr_vk_renderer *renderer,
struct wlr_vk_render_buffer *render_buffer, struct wlr_vk_command_buffer *cb,
struct wlr_drm_syncobj_timeline *signal_timeline, uint64_t signal_point);
bool vulkan_sync_foreign_texture(struct wlr_vk_texture *texture,
bool vulkan_sync_render_pass_release(struct wlr_vk_renderer *renderer,
struct wlr_vk_render_pass *pass);
bool vulkan_sync_foreign_texture_acquire(struct wlr_vk_texture *texture,
int sync_file_fds[static WLR_DMABUF_MAX_PLANES]);
bool vulkan_sync_render_buffer_acquire(struct wlr_vk_render_buffer *render_buffer,
int sync_file_fds[static WLR_DMABUF_MAX_PLANES]);
bool vulkan_read_pixels(struct wlr_vk_renderer *vk_renderer,

View file

@ -25,6 +25,7 @@ void output_defer_present(struct wlr_output *output, struct wlr_output_event_pre
bool output_prepare_commit(struct wlr_output *output, const struct wlr_output_state *state);
void output_apply_commit(struct wlr_output *output, const struct wlr_output_state *state);
void output_send_commit_event(struct wlr_output *output, const struct wlr_output_state *state);
void output_state_get_buffer_src_box(const struct wlr_output_state *state,
struct wlr_fbox *out);

View file

@ -62,8 +62,6 @@ struct wlr_drm_lease_connector_v1 {
struct wlr_output *output;
struct wlr_drm_lease_device_v1 *device;
/** NULL if no client is currently leasing this connector */
struct wlr_drm_lease_v1 *active_lease;
struct wl_list link; // wlr_drm_lease_device_v1.connectors
@ -93,9 +91,6 @@ struct wlr_drm_lease_v1 {
struct wlr_drm_lease_device_v1 *device;
struct wlr_drm_lease_connector_v1 **connectors;
size_t n_connectors;
struct wl_list link; // wlr_drm_lease_device_v1.leases
void *data;

View file

@ -36,6 +36,7 @@ struct wlr_switch {
enum wlr_switch_type {
WLR_SWITCH_TYPE_LID,
WLR_SWITCH_TYPE_TABLET_MODE,
WLR_SWITCH_TYPE_KEYPAD_SLIDE,
};
enum wlr_switch_state {

View file

@ -162,6 +162,7 @@ struct wlr_xwm {
struct wl_listener drop_focus_destroy;
};
// xwm_create takes ownership of wm_fd and will close it under all circumstances.
struct wlr_xwm *xwm_create(struct wlr_xwayland *wlr_xwayland, int wm_fd);
void xwm_destroy(struct wlr_xwm *xwm);

View file

@ -1,7 +1,7 @@
project(
'wlroots',
'c',
version: '0.19.0',
version: '0.19.3',
license: 'MIT',
meson_version: '>=1.3',
default_options: [

View file

@ -23,6 +23,7 @@ static struct wlr_shm_buffer *shm_buffer_from_buffer(
static void buffer_destroy(struct wlr_buffer *wlr_buffer) {
struct wlr_shm_buffer *buffer = shm_buffer_from_buffer(wlr_buffer);
wlr_buffer_finish(wlr_buffer);
munmap(buffer->data, buffer->size);
close(buffer->shm.fd);
free(buffer);

View file

@ -31,6 +31,7 @@ static bool buffer_get_dmabuf(struct wlr_buffer *wlr_buffer, struct wlr_dmabuf_a
static void buffer_destroy(struct wlr_buffer *wlr_buffer) {
struct wlr_udmabuf_buffer *buffer = wl_container_of(wlr_buffer, buffer, base);
wlr_buffer_finish(wlr_buffer);
wlr_dmabuf_attributes_finish(&buffer->dmabuf);
close(buffer->shm.fd);
free(buffer);

View file

@ -260,7 +260,8 @@ static struct wlr_egl *egl_create(void) {
return egl;
}
static bool egl_init_display(struct wlr_egl *egl, EGLDisplay display) {
static bool egl_init_display(struct wlr_egl *egl, EGLDisplay display,
bool allow_software) {
egl->display = display;
EGLint major, minor;
@ -326,9 +327,8 @@ static bool egl_init_display(struct wlr_egl *egl, EGLDisplay display) {
// The only way a non-DRM device is selected is when the user
// explicitly picks software rendering
if (check_egl_ext(device_exts_str, "EGL_MESA_device_software") &&
egl->exts.EXT_device_drm) {
if (env_parse_bool("WLR_RENDERER_ALLOW_SOFTWARE")) {
if (check_egl_ext(device_exts_str, "EGL_MESA_device_software")) {
if (allow_software || env_parse_bool("WLR_RENDERER_ALLOW_SOFTWARE")) {
wlr_log(WLR_INFO, "Using software rendering");
} else {
wlr_log(WLR_ERROR, "Software rendering detected, please use "
@ -382,7 +382,7 @@ static bool egl_init_display(struct wlr_egl *egl, EGLDisplay display) {
}
static bool egl_init(struct wlr_egl *egl, EGLenum platform,
void *remote_display) {
void *remote_display, bool allow_software) {
EGLint display_attribs[3] = {0};
size_t display_attribs_len = 0;
@ -401,7 +401,7 @@ static bool egl_init(struct wlr_egl *egl, EGLenum platform,
return false;
}
if (!egl_init_display(egl, display)) {
if (!egl_init_display(egl, display, allow_software)) {
if (egl->exts.KHR_display_reference) {
eglTerminate(display);
}
@ -556,6 +556,8 @@ static int open_render_node(int drm_fd) {
}
struct wlr_egl *wlr_egl_create_with_drm_fd(int drm_fd) {
bool allow_software = drm_fd < 0;
struct wlr_egl *egl = egl_create();
if (egl == NULL) {
wlr_log(WLR_ERROR, "Failed to create EGL context");
@ -569,7 +571,7 @@ struct wlr_egl *wlr_egl_create_with_drm_fd(int drm_fd) {
*/
EGLDeviceEXT egl_device = get_egl_device_from_drm_fd(egl, drm_fd);
if (egl_device != EGL_NO_DEVICE_EXT) {
if (egl_init(egl, EGL_PLATFORM_DEVICE_EXT, egl_device)) {
if (egl_init(egl, EGL_PLATFORM_DEVICE_EXT, egl_device, allow_software)) {
wlr_log(WLR_DEBUG, "Using EGL_PLATFORM_DEVICE_EXT");
return egl;
}
@ -594,7 +596,7 @@ struct wlr_egl *wlr_egl_create_with_drm_fd(int drm_fd) {
goto error;
}
if (egl_init(egl, EGL_PLATFORM_GBM_KHR, egl->gbm_device)) {
if (egl_init(egl, EGL_PLATFORM_GBM_KHR, egl->gbm_device, allow_software)) {
wlr_log(WLR_DEBUG, "Using EGL_PLATFORM_GBM_KHR");
return egl;
}
@ -633,7 +635,7 @@ struct wlr_egl *wlr_egl_create_with_context(EGLDisplay display,
return NULL;
}
if (!egl_init_display(egl, display)) {
if (!egl_init_display(egl, display, true)) {
free(egl);
return NULL;
}

View file

@ -21,8 +21,8 @@ void wlr_render_pass_add_texture(struct wlr_render_pass *render_pass,
if (!wlr_fbox_empty(&options->src_box)) {
const struct wlr_fbox *box = &options->src_box;
assert(box->x >= 0 && box->y >= 0 &&
box->x + box->width <= options->texture->width &&
box->y + box->height <= options->texture->height);
(uint32_t)(box->x + box->width) <= options->texture->width &&
(uint32_t)(box->y + box->height) <= options->texture->height);
}
render_pass->impl->add_texture(render_pass, options);

View file

@ -141,6 +141,40 @@ static VkSemaphore render_pass_wait_sync_file(struct wlr_vk_render_pass *pass,
return *sem_ptr;
}
static bool render_pass_wait_render_buffer(struct wlr_vk_render_pass *pass,
VkSemaphoreSubmitInfoKHR *render_wait, uint32_t *render_wait_len_ptr) {
int sync_file_fds[WLR_DMABUF_MAX_PLANES];
for (size_t i = 0; i < WLR_DMABUF_MAX_PLANES; i++) {
sync_file_fds[i] = -1;
}
if (!vulkan_sync_render_buffer_acquire(pass->render_buffer, sync_file_fds)) {
return false;
}
for (size_t i = 0; i < WLR_DMABUF_MAX_PLANES; i++) {
if (sync_file_fds[i] < 0) {
continue;
}
VkSemaphore sem = render_pass_wait_sync_file(pass, *render_wait_len_ptr, sync_file_fds[i]);
if (sem == VK_NULL_HANDLE) {
close(sync_file_fds[i]);
continue;
}
render_wait[*render_wait_len_ptr] = (VkSemaphoreSubmitInfoKHR){
.sType = VK_STRUCTURE_TYPE_SEMAPHORE_SUBMIT_INFO_KHR,
.semaphore = sem,
.stageMask = VK_PIPELINE_STAGE_2_ALL_COMMANDS_BIT_KHR,
};
(*render_wait_len_ptr)++;
}
return true;
}
static bool render_pass_submit(struct wlr_render_pass *wlr_pass) {
struct wlr_vk_render_pass *pass = get_render_pass(wlr_pass);
struct wlr_vk_renderer *renderer = pass->renderer;
@ -236,7 +270,7 @@ static bool render_pass_submit(struct wlr_render_pass *wlr_pass) {
vkCmdEndRenderPass(render_cb->vk);
size_t pass_textures_len = pass->textures.size / sizeof(struct wlr_vk_render_pass_texture);
size_t render_wait_cap = pass_textures_len * WLR_DMABUF_MAX_PLANES;
size_t render_wait_cap = (1 + pass_textures_len) * WLR_DMABUF_MAX_PLANES;
render_wait = calloc(render_wait_cap, sizeof(*render_wait));
if (render_wait == NULL) {
wlr_log_errno(WLR_ERROR, "Allocation failed");
@ -314,7 +348,7 @@ static bool render_pass_submit(struct wlr_render_pass *wlr_pass) {
sync_file_fds[0] = sync_file_fd;
} else {
struct wlr_vk_texture *texture = pass_texture->texture;
if (!vulkan_sync_foreign_texture(texture, sync_file_fds)) {
if (!vulkan_sync_foreign_texture_acquire(texture, sync_file_fds)) {
wlr_log(WLR_ERROR, "Failed to wait for foreign texture DMA-BUF fence");
continue;
}
@ -341,6 +375,10 @@ static bool render_pass_submit(struct wlr_render_pass *wlr_pass) {
}
}
if (!render_pass_wait_render_buffer(pass, render_wait, &render_wait_len)) {
wlr_log(WLR_ERROR, "Failed to wait for render buffer DMA-BUF fence");
}
// also add acquire/release barriers for the current render buffer
VkImageLayout src_layout = VK_IMAGE_LAYOUT_GENERAL;
if (pass->srgb_pathway) {
@ -538,8 +576,7 @@ static bool render_pass_submit(struct wlr_render_pass *wlr_pass) {
wl_list_insert(&stage_cb->stage_buffers, &stage_buf->link);
}
if (!vulkan_sync_render_buffer(renderer, render_buffer, render_cb,
pass->signal_timeline, pass->signal_point)) {
if (!vulkan_sync_render_pass_release(renderer, pass)) {
wlr_log(WLR_ERROR, "Failed to sync render buffer");
}

View file

@ -66,59 +66,72 @@ static struct wlr_vk_descriptor_pool *alloc_ds(
struct wl_list *pool_list, size_t *last_pool_size) {
VkResult res;
bool found = false;
struct wlr_vk_descriptor_pool *pool;
wl_list_for_each(pool, pool_list, link) {
if (pool->free > 0) {
found = true;
break;
}
}
if (!found) { // create new pool
pool = calloc(1, sizeof(*pool));
if (!pool) {
wlr_log_errno(WLR_ERROR, "allocation failed");
return NULL;
}
size_t count = 2 * (*last_pool_size);
if (!count) {
count = start_descriptor_pool_size;
}
pool->free = count;
VkDescriptorPoolSize pool_size = {
.descriptorCount = count,
.type = type,
};
VkDescriptorPoolCreateInfo dpool_info = {
.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO,
.maxSets = count,
.poolSizeCount = 1,
.pPoolSizes = &pool_size,
.flags = VK_DESCRIPTOR_POOL_CREATE_FREE_DESCRIPTOR_SET_BIT,
};
res = vkCreateDescriptorPool(renderer->dev->dev, &dpool_info, NULL,
&pool->pool);
if (res != VK_SUCCESS) {
wlr_vk_error("vkCreateDescriptorPool", res);
free(pool);
return NULL;
}
*last_pool_size = count;
wl_list_insert(pool_list, &pool->link);
}
VkDescriptorSetAllocateInfo ds_info = {
.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO,
.descriptorSetCount = 1,
.pSetLayouts = layout,
.descriptorPool = pool->pool,
};
struct wlr_vk_descriptor_pool *pool;
wl_list_for_each(pool, pool_list, link) {
if (pool->free > 0) {
ds_info.descriptorPool = pool->pool;
res = vkAllocateDescriptorSets(renderer->dev->dev, &ds_info, ds);
switch (res) {
case VK_ERROR_FRAGMENTED_POOL:
case VK_ERROR_OUT_OF_POOL_MEMORY:
// Descriptor sets with more than one descriptor can cause us
// to run out of pool memory early or lead to fragmentation
// that makes the pool unable to service our allocation
// request. Try the next pool or allocate a new one.
continue;
case VK_SUCCESS:
--pool->free;
return pool;
default:
wlr_vk_error("vkAllocateDescriptorSets", res);
return NULL;
}
}
}
pool = calloc(1, sizeof(*pool));
if (!pool) {
wlr_log_errno(WLR_ERROR, "allocation failed");
return NULL;
}
size_t count = 2 * (*last_pool_size);
if (!count) {
count = start_descriptor_pool_size;
}
pool->free = count;
VkDescriptorPoolSize pool_size = {
.descriptorCount = count,
.type = type,
};
VkDescriptorPoolCreateInfo dpool_info = {
.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO,
.maxSets = count,
.poolSizeCount = 1,
.pPoolSizes = &pool_size,
.flags = VK_DESCRIPTOR_POOL_CREATE_FREE_DESCRIPTOR_SET_BIT,
};
res = vkCreateDescriptorPool(renderer->dev->dev, &dpool_info, NULL,
&pool->pool);
if (res != VK_SUCCESS) {
wlr_vk_error("vkCreateDescriptorPool", res);
free(pool);
return NULL;
}
*last_pool_size = count;
wl_list_insert(pool_list, &pool->link);
ds_info.descriptorPool = pool->pool;
res = vkAllocateDescriptorSets(renderer->dev->dev, &ds_info, ds);
if (res != VK_SUCCESS) {
wlr_vk_error("vkAllocateDescriptorSets", res);
@ -934,13 +947,11 @@ static struct wlr_vk_render_buffer *get_render_buffer(
return buffer;
}
bool vulkan_sync_foreign_texture(struct wlr_vk_texture *texture,
int sync_file_fds[static WLR_DMABUF_MAX_PLANES]) {
struct wlr_vk_renderer *renderer = texture->renderer;
static bool buffer_export_sync_file(struct wlr_vk_renderer *renderer, struct wlr_buffer *buffer,
uint32_t flags, int sync_file_fds[static WLR_DMABUF_MAX_PLANES]) {
struct wlr_dmabuf_attributes dmabuf = {0};
if (!wlr_buffer_get_dmabuf(texture->buffer, &dmabuf)) {
wlr_log(WLR_ERROR, "Failed to get texture DMA-BUF");
if (!wlr_buffer_get_dmabuf(buffer, &dmabuf)) {
wlr_log(WLR_ERROR, "wlr_buffer_get_dmabuf() failed");
return false;
}
@ -950,7 +961,7 @@ bool vulkan_sync_foreign_texture(struct wlr_vk_texture *texture,
for (int i = 0; i < dmabuf.n_planes; i++) {
struct pollfd pollfd = {
.fd = dmabuf.fd[i],
.events = POLLIN,
.events = (flags & DMA_BUF_SYNC_WRITE) ? POLLOUT : POLLIN,
};
int timeout_ms = 1000;
int ret = poll(&pollfd, 1, timeout_ms);
@ -967,7 +978,7 @@ bool vulkan_sync_foreign_texture(struct wlr_vk_texture *texture,
}
for (int i = 0; i < dmabuf.n_planes; i++) {
int sync_file_fd = dmabuf_export_sync_file(dmabuf.fd[i], DMA_BUF_SYNC_READ);
int sync_file_fd = dmabuf_export_sync_file(dmabuf.fd[i], flags);
if (sync_file_fd < 0) {
wlr_log(WLR_ERROR, "Failed to extract DMA-BUF fence");
return false;
@ -979,12 +990,40 @@ bool vulkan_sync_foreign_texture(struct wlr_vk_texture *texture,
return true;
}
bool vulkan_sync_render_buffer(struct wlr_vk_renderer *renderer,
struct wlr_vk_render_buffer *render_buffer, struct wlr_vk_command_buffer *cb,
struct wlr_drm_syncobj_timeline *signal_timeline, uint64_t signal_point) {
VkResult res;
bool vulkan_sync_foreign_texture_acquire(struct wlr_vk_texture *texture,
int sync_file_fds[static WLR_DMABUF_MAX_PLANES]) {
return buffer_export_sync_file(texture->renderer, texture->buffer, DMA_BUF_SYNC_READ, sync_file_fds);
}
if (!renderer->dev->implicit_sync_interop && signal_timeline == NULL) {
bool vulkan_sync_render_buffer_acquire(struct wlr_vk_render_buffer *render_buffer,
int sync_file_fds[static WLR_DMABUF_MAX_PLANES]) {
return buffer_export_sync_file(render_buffer->renderer, render_buffer->wlr_buffer,
DMA_BUF_SYNC_WRITE, sync_file_fds);
}
static bool buffer_import_sync_file(struct wlr_buffer *buffer, uint32_t flags, int sync_file_fd) {
struct wlr_dmabuf_attributes dmabuf = {0};
if (!wlr_buffer_get_dmabuf(buffer, &dmabuf)) {
wlr_log(WLR_ERROR, "wlr_buffer_get_dmabuf() failed");
return false;
}
for (int i = 0; i < dmabuf.n_planes; i++) {
if (!dmabuf_import_sync_file(dmabuf.fd[i], flags,
sync_file_fd)) {
return false;
}
}
return true;
}
bool vulkan_sync_render_pass_release(struct wlr_vk_renderer *renderer,
struct wlr_vk_render_pass *pass) {
VkResult res;
struct wlr_vk_command_buffer *cb = pass->command_buffer;
if (!renderer->dev->implicit_sync_interop && pass->signal_timeline == NULL) {
// We have no choice but to block here sadly
return vulkan_wait_command_buffer(cb, renderer);
}
@ -1006,21 +1045,19 @@ bool vulkan_sync_render_buffer(struct wlr_vk_renderer *renderer,
}
bool ok = false;
if (signal_timeline != NULL) {
if (!wlr_drm_syncobj_timeline_import_sync_file(signal_timeline,
signal_point, sync_file_fd)) {
if (pass->signal_timeline != NULL) {
if (!wlr_drm_syncobj_timeline_import_sync_file(pass->signal_timeline,
pass->signal_point, sync_file_fd)) {
goto out;
}
} else {
struct wlr_dmabuf_attributes dmabuf = {0};
if (!wlr_buffer_get_dmabuf(render_buffer->wlr_buffer, &dmabuf)) {
wlr_log(WLR_ERROR, "wlr_buffer_get_dmabuf failed");
if (!buffer_import_sync_file(pass->render_buffer->wlr_buffer, DMA_BUF_SYNC_WRITE, sync_file_fd)) {
goto out;
}
for (int i = 0; i < dmabuf.n_planes; i++) {
if (!dmabuf_import_sync_file(dmabuf.fd[i], DMA_BUF_SYNC_WRITE,
sync_file_fd)) {
struct wlr_vk_render_pass_texture *pass_texture;
wl_array_for_each(pass_texture, &pass->textures) {
if (!buffer_import_sync_file(pass_texture->texture->buffer, DMA_BUF_SYNC_READ, sync_file_fd)) {
goto out;
}
}

View file

@ -19,7 +19,7 @@ xdg-shell-protocol.h:
tinywl.o: tinywl.c xdg-shell-protocol.h
$(CC) -c $< -g -Werror $(CFLAGS) -I. -DWLR_USE_UNSTABLE -o $@
tinywl: tinywl.o
$(CC) $^ $> -g -Werror $(CFLAGS) $(LDFLAGS) $(LIBS) -o $@
$(CC) $^ -g -Werror $(CFLAGS) $(LDFLAGS) $(LIBS) -o $@
clean:
rm -f tinywl tinywl.o xdg-shell-protocol.h

View file

@ -107,6 +107,10 @@ static const struct wlr_ext_image_capture_source_v1_interface output_source_impl
static void source_update_buffer_constraints(struct wlr_ext_output_image_capture_source_v1 *source) {
struct wlr_output *output = source->output;
if (!output->enabled) {
return;
}
if (!wlr_output_configure_primary_swapchain(output, NULL, &output->swapchain)) {
return;
}
@ -120,7 +124,8 @@ static void source_handle_output_commit(struct wl_listener *listener,
struct wlr_ext_output_image_capture_source_v1 *source = wl_container_of(listener, source, output_commit);
struct wlr_output_event_commit *event = data;
if (event->state->committed & (WLR_OUTPUT_STATE_MODE | WLR_OUTPUT_STATE_RENDER_FORMAT)) {
if (event->state->committed & (WLR_OUTPUT_STATE_MODE |
WLR_OUTPUT_STATE_RENDER_FORMAT | WLR_OUTPUT_STATE_ENABLED)) {
source_update_buffer_constraints(source);
}
@ -283,7 +288,8 @@ static void output_cursor_source_copy_frame(struct wlr_ext_image_capture_source_
struct timespec now;
clock_gettime(CLOCK_MONOTONIC, &now);
wlr_ext_image_copy_capture_frame_v1_ready(frame, WL_OUTPUT_TRANSFORM_NORMAL, &now);
wlr_ext_image_copy_capture_frame_v1_ready(frame,
cursor_source->output->transform, &now);
}
static const struct wlr_ext_image_capture_source_v1_interface output_cursor_source_impl = {

View file

@ -288,18 +288,10 @@ static struct wlr_buffer *render_cursor_buffer(struct wlr_output_cursor *cursor)
static bool output_cursor_attempt_hardware(struct wlr_output_cursor *cursor) {
struct wlr_output *output = cursor->output;
if (!output->impl->set_cursor ||
output->software_cursor_locks > 0) {
if (!output->impl->set_cursor || output->software_cursor_locks > 0) {
return false;
}
struct wlr_output_cursor *hwcur = output->hardware_cursor;
if (hwcur != NULL && hwcur != cursor) {
return false;
}
output->hardware_cursor = NULL;
struct wlr_texture *texture = cursor->texture;
// If the cursor was hidden or was a software cursor, the hardware
@ -424,12 +416,15 @@ bool output_cursor_set_texture(struct wlr_output_cursor *cursor,
wl_list_init(&cursor->renderer_destroy.link);
}
if (output_cursor_attempt_hardware(cursor)) {
return true;
if (output->hardware_cursor == NULL || output->hardware_cursor == cursor) {
if (output_cursor_attempt_hardware(cursor)) {
return true;
}
wlr_log(WLR_DEBUG, "Falling back to software cursor on output '%s'", output->name);
output_disable_hardware_cursor(output);
}
wlr_log(WLR_DEBUG, "Falling back to software cursor on output '%s'", output->name);
output_disable_hardware_cursor(output);
output_cursor_damage_whole(cursor);
return true;
}

View file

@ -745,7 +745,9 @@ void output_apply_commit(struct wlr_output *output, const struct wlr_output_stat
}
output_apply_state(output, state);
}
void output_send_commit_event(struct wlr_output *output, const struct wlr_output_state *state) {
struct timespec now;
clock_gettime(CLOCK_MONOTONIC, &now);
struct wlr_output_event_commit event = {
@ -787,6 +789,7 @@ bool wlr_output_commit_state(struct wlr_output *output,
}
output_apply_commit(output, &pending);
output_send_commit_event(output, &pending);
if (new_back_buffer) {
wlr_buffer_unlock(pending.buffer);

View file

@ -96,8 +96,11 @@ static void scene_buffer_unmark_client_buffer(struct wlr_scene_buffer *scene_buf
return;
}
assert(buffer->n_ignore_locks > 0);
buffer->n_ignore_locks--;
// If the buffer was a single-pixel buffer where we cached its color
// then it won't have been marked as damage-allowed.
if (buffer->n_ignore_locks > 0) {
buffer->n_ignore_locks--;
}
}
static int min(int a, int b) {
@ -165,7 +168,21 @@ static void surface_reconfigure(struct wlr_scene_surface *scene_surface) {
scene_buffer_unmark_client_buffer(scene_buffer);
if (surface->buffer) {
client_buffer_mark_next_can_damage(surface->buffer);
// If we've cached the buffer's single-pixel buffer color
// then any in-place updates to the texture wouldn't be
// reflected in rendering. So only allow in-place texture
// updates if it's not a single pixel buffer. Note that we
// can't use the cached scene_buffer->is_single_pixel_buffer
// because that's only set later on.
bool is_single_pixel_buffer = false;
if (surface->buffer->source != NULL) {
struct wlr_single_pixel_buffer_v1 *spb =
wlr_single_pixel_buffer_v1_try_from_buffer(surface->buffer->source);
is_single_pixel_buffer = spb != NULL;
}
if (!is_single_pixel_buffer) {
client_buffer_mark_next_can_damage(surface->buffer);
}
struct wlr_linux_drm_syncobj_surface_v1_state *syncobj_surface_state =
wlr_linux_drm_syncobj_v1_get_surface_state(surface);
@ -186,7 +203,8 @@ static void surface_reconfigure(struct wlr_scene_surface *scene_surface) {
&surface->buffer->base, &options);
if (syncobj_surface_state != NULL &&
(surface->current.committed & WLR_SURFACE_STATE_BUFFER)) {
(surface->current.committed & WLR_SURFACE_STATE_BUFFER) &&
surface->buffer->source != NULL) {
wlr_linux_drm_syncobj_v1_state_signal_release_with_buffer(syncobj_surface_state,
surface->buffer->source);
}

View file

@ -530,10 +530,6 @@ static void cursor_output_cursor_update(struct wlr_cursor_output_cursor *output_
struct wlr_cursor *cur = output_cursor->cursor;
struct wlr_output *output = output_cursor->output_cursor->output;
if (!output->enabled) {
return;
}
cursor_output_cursor_reset_image(output_cursor);
if (cur->state->buffer != NULL) {
@ -589,10 +585,11 @@ static void cursor_output_cursor_update(struct wlr_cursor_output_cursor *output_
&src_box, dst_width, dst_height, surface->current.transform,
hotspot_x, hotspot_y, wait_timeline, wait_point);
if (syncobj_surface_state != NULL && surface->buffer != NULL &&
if (syncobj_surface_state != NULL &&
surface->buffer != NULL && surface->buffer->source != NULL &&
(surface->current.committed & WLR_SURFACE_STATE_BUFFER)) {
wlr_linux_drm_syncobj_v1_state_signal_release_with_buffer(syncobj_surface_state,
&surface->buffer->base);
surface->buffer->source);
}
if (output_cursor->output_cursor->visible) {

View file

@ -68,10 +68,6 @@ static void drm_lease_connector_v1_destroy(
wlr_log(WLR_DEBUG, "Destroying connector %s", connector->output->name);
if (connector->active_lease) {
wlr_drm_lease_terminate(connector->active_lease->drm_lease);
}
struct wl_resource *resource, *tmp;
wl_resource_for_each_safe(resource, tmp, &connector->resources) {
wp_drm_lease_connector_v1_send_withdrawn(resource);
@ -140,14 +136,9 @@ static void lease_handle_destroy(struct wl_listener *listener, void *data) {
wl_list_remove(&lease->destroy.link);
for (size_t i = 0; i < lease->n_connectors; ++i) {
lease->connectors[i]->active_lease = NULL;
}
wl_list_remove(&lease->link);
wl_resource_set_user_data(lease->resource, NULL);
free(lease->connectors);
free(lease);
}
@ -180,20 +171,6 @@ struct wlr_drm_lease_v1 *wlr_drm_lease_request_v1_grant(
return NULL;
}
lease->connectors = calloc(request->n_connectors, sizeof(*lease->connectors));
if (!lease->connectors) {
wlr_log(WLR_ERROR, "Failed to allocate lease connectors list");
close(fd);
wp_drm_lease_v1_send_finished(lease->resource);
free(lease);
return NULL;
}
lease->n_connectors = request->n_connectors;
for (size_t i = 0; i < request->n_connectors; ++i) {
lease->connectors[i] = request->connectors[i];
lease->connectors[i]->active_lease = lease;
}
lease->destroy.notify = lease_handle_destroy;
wl_signal_add(&lease->drm_lease->events.destroy, &lease->destroy);
@ -338,16 +315,6 @@ static void drm_lease_request_v1_handle_submit(
return;
}
for (size_t i = 0; i < request->n_connectors; ++i) {
struct wlr_drm_lease_connector_v1 *conn = request->connectors[i];
if (conn->active_lease) {
wlr_log(WLR_ERROR, "Failed to create lease, connector %s has "
"already been leased", conn->output->name);
wp_drm_lease_v1_send_finished(lease_resource);
return;
}
}
request->lease_resource = lease_resource;
wl_signal_emit_mutable(&request->device->manager->events.request,
@ -440,10 +407,6 @@ static struct wp_drm_lease_connector_v1_interface lease_connector_impl = {
static void drm_lease_connector_v1_send_to_client(
struct wlr_drm_lease_connector_v1 *connector,
struct wl_resource *resource) {
if (connector->active_lease) {
return;
}
struct wl_client *client = wl_resource_get_client(resource);
uint32_t version = wl_resource_get_version(resource);
@ -490,10 +453,12 @@ static void lease_device_bind(struct wl_client *wl_client, void *data,
if (!device) {
wlr_log(WLR_DEBUG, "Failed to bind lease device, "
"the wlr_drm_lease_device_v1 has been destroyed");
wl_list_init(wl_resource_get_link(device_resource));
return;
}
wl_resource_set_user_data(device_resource, device);
wl_list_insert(&device->resources, wl_resource_get_link(device_resource));
int fd = wlr_drm_backend_get_non_master_fd(device->backend);
if (fd < 0) {
@ -505,8 +470,6 @@ static void lease_device_bind(struct wl_client *wl_client, void *data,
wp_drm_lease_device_v1_send_drm_fd(device_resource, fd);
close(fd);
wl_list_insert(&device->resources, wl_resource_get_link(device_resource));
struct wlr_drm_lease_connector_v1 *connector;
wl_list_for_each(connector, &device->connectors, link) {
drm_lease_connector_v1_send_to_client(connector, device_resource);

View file

@ -26,7 +26,7 @@ struct wlr_linux_drm_syncobj_surface_v1 {
};
struct wlr_linux_drm_syncobj_surface_v1_commit {
struct wlr_linux_drm_syncobj_surface_v1 *surface;
struct wlr_surface *surface;
struct wlr_drm_syncobj_timeline_waiter waiter;
uint32_t cached_seq;
@ -192,7 +192,7 @@ static struct wlr_linux_drm_syncobj_surface_v1 *surface_from_wlr_surface(
}
static void surface_commit_destroy(struct wlr_linux_drm_syncobj_surface_v1_commit *commit) {
wlr_surface_unlock_cached(commit->surface->surface, commit->cached_seq);
wlr_surface_unlock_cached(commit->surface, commit->cached_seq);
wl_list_remove(&commit->surface_destroy.link);
wlr_drm_syncobj_timeline_waiter_finish(&commit->waiter);
free(commit);
@ -237,7 +237,7 @@ static bool lock_surface_commit(struct wlr_linux_drm_syncobj_surface_v1 *surface
return false;
}
commit->surface = surface;
commit->surface = surface->surface;
commit->cached_seq = wlr_surface_lock_pending(surface->surface);
commit->surface_destroy.notify = surface_commit_handle_surface_destroy;

View file

@ -64,6 +64,7 @@ static void manager_create_transient_seat(struct wl_client *client,
wl_resource_set_implementation(seat->resource, &transient_seat_impl,
seat, transient_seat_handle_resource_destroy);
wl_list_init(&seat->seat_destroy.link);
wl_signal_emit_mutable(&manager->events.create_seat, seat);
return;

View file

@ -134,8 +134,11 @@ static void virtual_pointer_axis_source(struct wl_client *client,
if (pointer == NULL) {
return;
}
pointer->axis_event[pointer->axis].pointer = &pointer->pointer;
pointer->axis_event[pointer->axis].source = source;
int n_axis = sizeof(pointer->axis_event) / sizeof(pointer->axis_event[0]);
for (int i = 0; i < n_axis; i++) {
pointer->axis_event[i].pointer = &pointer->pointer;
pointer->axis_event[i].source = source;
}
}
static void virtual_pointer_axis_stop(struct wl_client *client,

View file

@ -19,16 +19,15 @@ void wlr_box_closest_point(const struct wlr_box *box, double x, double y,
//
// In order to be consistent with e.g. wlr_box_contains_point(),
// this function returns a point inside the bottom and right edges
// of the box by at least 1/65536 of a unit (pixel). 1/65536 is
// of the box by at least 1/256 of a unit (pixel). 1/256 is
// small enough to avoid a "dead zone" with high-resolution mice
// but large enough to avoid rounding to zero (due to loss of
// significant digits) in simple floating-point calculations.
// but large enough to avoid rounding to zero in wl_fixed_from_double().
// find the closest x point
if (x < box->x) {
*dest_x = box->x;
} else if (x > box->x + box->width - 1/65536.0) {
*dest_x = box->x + box->width - 1/65536.0;
} else if (x > box->x + box->width - 1/256.0) {
*dest_x = box->x + box->width - 1/256.0;
} else {
*dest_x = x;
}
@ -36,8 +35,8 @@ void wlr_box_closest_point(const struct wlr_box *box, double x, double y,
// find closest y point
if (y < box->y) {
*dest_y = box->y;
} else if (y > box->y + box->height - 1/65536.0) {
*dest_y = box->y + box->height - 1/65536.0;
} else if (y > box->y + box->height - 1/256.0) {
*dest_y = box->y + box->height - 1/256.0;
} else {
*dest_y = y;
}
@ -67,7 +66,12 @@ bool wlr_box_intersection(struct wlr_box *dest, const struct wlr_box *box_a,
dest->width = x2 - x1;
dest->height = y2 - y1;
return !wlr_box_empty(dest);
if (wlr_box_empty(dest)) {
*dest = (struct wlr_box){0};
return false;
}
return true;
}
bool wlr_box_contains_point(const struct wlr_box *box, double x, double y) {

View file

@ -602,7 +602,7 @@ xcursor_build_fullname(const char *dir, const char *subdir, const char *file)
static const char *
xcursor_next_path(const char *path)
{
char *colon = strchr(path, ':');
const char *colon = strchr(path, ':');
if (!colon)
return NULL;

View file

@ -283,6 +283,8 @@ static bool xwm_selection_send_data(struct wlr_xwm_selection *selection,
int p[2];
if (pipe(p) == -1) {
wlr_log_errno(WLR_ERROR, "pipe() failed");
wl_array_release(&transfer->source_data);
free(transfer);
return false;
}

View file

@ -42,6 +42,9 @@ static void handle_server_start(struct wl_listener *listener, void *data) {
static void xwayland_mark_ready(struct wlr_xwayland *xwayland) {
assert(xwayland->server->wm_fd[0] >= 0);
xwayland->xwm = xwm_create(xwayland, xwayland->server->wm_fd[0]);
// xwm_create takes ownership of wm_fd[0] under all circumstances
xwayland->server->wm_fd[0] = -1;
if (!xwayland->xwm) {
return;
}
@ -69,6 +72,11 @@ static void handle_shell_destroy(struct wl_listener *listener, void *data) {
struct wlr_xwayland *xwayland =
wl_container_of(listener, xwayland, shell_destroy);
xwayland->shell_v1 = NULL;
wl_list_remove(&xwayland->shell_destroy.link);
// Will remove this list in handle_shell_destroy().
// This ensures the link is always initialized and
// avoids the need to keep check conditions in sync.
wl_list_init(&xwayland->shell_destroy.link);
}
void wlr_xwayland_destroy(struct wlr_xwayland *xwayland) {

View file

@ -2470,6 +2470,7 @@ void xwm_set_cursor(struct wlr_xwm *xwm, const uint8_t *pixels, uint32_t stride,
struct wlr_xwm *xwm_create(struct wlr_xwayland *xwayland, int wm_fd) {
struct wlr_xwm *xwm = calloc(1, sizeof(*xwm));
if (xwm == NULL) {
close(wm_fd);
return NULL;
}
@ -2484,11 +2485,13 @@ struct wlr_xwm *xwm_create(struct wlr_xwayland *xwayland, int wm_fd) {
xwm->ping_timeout = 10000;
// xcb_connect_to_fd takes ownership of the FD regardless of success/failure
xwm->xcb_conn = xcb_connect_to_fd(wm_fd, NULL);
int rc = xcb_connection_has_error(xwm->xcb_conn);
if (rc) {
wlr_log(WLR_ERROR, "xcb connect failed: %d", rc);
xcb_disconnect(xwm->xcb_conn);
free(xwm);
return NULL;
}