If somebody writes the line "required-any=ignore", that shouldn't
mean a required-any element needs to be present for the path to
succeed probing.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Some older cards do not have jack detection. This patch makes the
port still show up.
An implementation detail: the "required = ignore" line has in itself
no effect, but we have to write *something* there, or else the entire
jack detection section will be ignored by the parser.
BugLink: https://bugs.launchpad.net/bugs/961286
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
modules/alsa/alsa-mixer.c:3110:21:
warning: format '%lx' expects argument of type 'long unsigned int', but argument 7 has type 'pa_channel_position_mask_t' [-Wformat]
modules/alsa/alsa-mixer.c:3110:21:
warning: format '%lx' expects argument of type 'long unsigned int', but argument 8 has type 'pa_channel_position_mask_t' [-Wformat]
pa_channel_position_mask_t is type defined to uint64_t, and to display
uint64_t, it's better to use PRIx64 primitives.
Signed-off-by: Deng Zhenrong <dzrongg@gmail.com>
While developing the new UI we had to ask ourselves the question of whether
"speakers" should be considered available when headphones are plugged in.
In most cases, they are not available and therefore we should list them
as such.
OTOH, we don't want unplugging the headphones to be considered an act of
wanting to use the speakers (the user might prefer HDMI), and there might
be line-outs that keeps the speakers from unmuting anyway. So, at this point,
I think the most reasonable would be to make the speakers have
PA_PORT_AVAILABLE_NO when headphones are plugged in and
PA_PORT_AVAILABLE_UNKNOWN when they are not. But we might want to revisit
this decision once we have the priority lists up and running.
The same reasoning applies for "Internal Mic", which should become unavailable
when any other mic is plugged in.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
For Nvidia and Intel, support probing of up to four HDMI devices.
Also add port information to all HDMI profiles.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Support the new jack detection interface implemented in Linux 3.3
(and Ubuntu's 3.2 kernel).
Jacks are probed and detected using the snd_hctl_* commands, which
means we need to listen to them using fdlists. As this detection
needs to be active even if there is currently no sink for the jack,
so this polling is done on the card level.
Also add configuration support in paths, like this:
[Jack Headphone]
required-any = any
...where 'Jack Headphone' should match 'Headphone Jack' as given by
ALSA (as seen in e g 'amixer controls').
"Required", "required-any" and "required-absent" is supported. Using
required-any, one can have several ports even though there is no
other indication in the mixer that this path exists.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Hi. Could you please apply the attached trivial patch so that I could drop
the corresponding instructions from dcaenc's README file in the future? It
adds a profile for on-the-fly DTS encoding, similar to the existing AC3
profile.
--
Alexander E. Patrakov
>From 22310a1c28385acc7ce883e020b9eb2e5b0813b7 Mon Sep 17 00:00:00 2001
From: "Alexander E. Patrakov" <patrakov@gmail.com>
Date: Sun, 12 Feb 2012 17:19:48 +0600
Subject: [PATCH] alsa: add DTS profile
This requires dcaenc from http://aepatrakov.narod.ru/dcaenc/
If alsa settings/options were used, the string to construct the
name was freed, leading to dangling pointers to strings inside
the hashmap.
BugLink: https://bugs.launchpad.net/bugs/932804
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The practical problem is that some users were left with only one
"LFE on Mono" port, as analog-output was considered a subset of
analog-output-lfe-on-mono. Which was not what they wanted.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=40910
BugLink: https://bugs.launchpad.net/bugs/922656
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
* If we don't have "Digital Speakers", we should say "Speakers"
instead of "Analog Speakers", and similar for other ports.
* Change "IEC958" to "S/PDIF" (more well known name)
* Add new ports and mappings for HDMI
* Change "Internal" to "Built-in" for the card name
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
"Front Speaker", "Surround Speaker" seems to be a common enough name
to make it into alsa-utils, so we should probably care about it as
well. In this case, there was a macbook pro whose speakers didn't work
without these controls.
BugLink: http://bugs.launchpad.net/bugs/551441
Reported-by: Jeroen T. Vermeulen <jtv@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The recent change to turn off the IEC958 element for analog paths
exposed a bug in AC3 profiles. These were inheriting the analog output
path instead of explicitly selecting the iec958 path.
Thanks to David Henningsson for pointing this out.
This is needed for the Creative Audigy CA0106 to work. Also makes sure
that the LED for optical out is shut down in analog modes on MacBooks
(these share a port for analog and digital output).
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=44741
Just like we turn off the "Front Mic" element when we select "Rear Mic",
we should also turn off the "Front Mic Boost" element. And the same for
the other inputs.
Reported-by: Len Owens <len@ovenwerks.net>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
* If mapping_probe_paths() fails to open the mixer, all paths are now
removed from the mapping's path sets.
* pa_path_set.probed isn't really used for anything (removed).
* If profile probing is configured to be skipped, mapping_paths_probe()
should still be called.
Thanks to Tanu for spotting.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
To be able to add ports to all profiles, we need to probe all
profiles at startup. To speed this up, we now have a cache of
probes paths which is owned by the profile set. Since paths
are now owned by the profile set, the path set must now have
a hashmap of paths instead of a linked list.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The thinkpad ACPI driver sometimes creates a virtual sound card,
which at best exposes a volume control. Save some startup time, and
unnecessary error messages in the log, by ignoring it.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The recommended way of setting available status is to call
pa_device_port_set_available, which will send a subscription event
to the relevant card. It will also fire a hook.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This adds a boolean module parameter to disable automatic dynamic
latency readjustments on underruns, but leaves automatic dynamic
watermark readjustments untouched.
The error message for snd_pcm_hw_params_set_period_wakeup was
printing "ret", but "ret" wasn't being set.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
This is where the actual changes happen.
Some additional checks would be required to make sure the
rate is actually supported
Tested with both PCM and passthrough streams
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
The new module argument can be used to provide a custom
directory for loading alsa path configuration files. This is
useful for testing: no need to be root to create test
configuration files.
Watermark level and latency values are not restored when
resuming, the values used prior to suspending are reused.
This leads to side effects when underruns happen and buffer
sizes are updated, PulseAudio can never meet lower latency
requirements.
Solution: keep track of watermark and latency values on sink or
source creation, and reapply them on resume to start with
a clean slate.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Instead of relying on the snd_mixer_* functions failing, we check for
POLLERR and POLLNVAL first. After this, any errors in handling the mixer
events are deemed fatal (that is we cause the ALSA source/sink thread to
terminate).
The case where POLLERR is set but POLLNVAL is not does not actually
occur, but we're making this a soft failure (stop polling the mixer, but
don't kill the I/O thread). If other conditions where POLLERR occurs
turn up, we need to handle them explicitly.
Thanks to Linus Torvalds for helping get this right.
This improves the error handling in the mixer rtpoll callback. It avoids
a crash if an error occurs (the rtpoll_item is freed but still
referenced), and specifically makes sure we don't continue trying to
poll the device if the card is disconnected.
This makes set_formats() put PCM formats lower down the list than
compressed formats since we negotiate by picking the first format in
this list that is also in the client-provided list of possible formats
during sink input creation.
This will be incorrect if we ever decide to do encoding in PA (for
things like AC3/DTS encoding for multichannel output over S/PDIF).
Sometimes the ALSA mixer can be modified during a point at shutdown
which causes a race condition trying to update the volume of an
unlinked sink.
Includes typo fix by our Chief Typo Spotter, Colin, and a clarifying
comment by me.
BugLink: http://bugs.launchpad.net/bugs/841968
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This just covers Lennart's concern over the terminology used.
The majority of this change is simply the following command:
grep -rli sync[-_]volume . | xargs sed -i 's/sync_volume/deferred_volume/g;s/PA_SINK_SYNC_VOLUME/PA_SINK_DEFERRED_VOLUME/g;s/PA_SOURCE_SYNC_VOLUME/PA_SOURCE_DEFERRED_VOLUME/g;s/sync-volume/deferred-volume/g'
Some minor tweaks were added on top to tidy up formatting and
a couple of phrases were clarified too.
The Kinect shows up as a UAC device after the firmware has been loaded,
but in order to be detected by pulseaudio a 4-channels input only
mapping is needed. Provide a new profile for that and set it with a udev
rule.
fdo#39664
I've seen more than one system where the volume control named
"Front" is a part of audio path for headphones. This is somewhat
of a compromise: While we don't merge it into the path, as that
would be regressing machines where "Front" isn't a part of the
audio path, it would still enable sound on these machines.
BugLink: http://bugs.launchpad.net/bugs/804178
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The priorities should be set in the approximately likeliness that someone
would like to use them. This is hard to guess of course, but this is
a better guess compared to the existing configuration.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
