Jack in UCM is decided by UCM device name, although in fact
not all UCM devices have "jacks". Because port is also mapped
to UCM device, we can always find target port when some jack
event happens.
Signed-off-by: Feng Wei <wei.feng@freescale.com>
UCM basic functions will provide another way to handle the alsa mixer
and controls. That means alsa card module will make use of alsa ucm
configurations provided by various audio systems instead of mixer and
paths configurations provided by PA. PA profiles come from UCM verb, PA
sinks/sources and ports come from UCM devices.
In case the proper UCM configurations are found, ucm branches are
activated, or we will still fall through to the original way.
Signed-off-by: Feng Wei <wei.feng@freescale.com>
Some ASUS netbooks, such as the 1015 CX, have only one 3.5 mm jack,
but it can be used either as a headphone or as a mic (but not both
simultaneously).
This patch adds support for the "Headphone Mic" path that is used
on these devices, so that we can use the jack as an external mic, and
doing so without muting the speaker.
BugLink: https://bugs.launchpad.net/bugs/1018262
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Since commit 12af302a last month, cards always have at least one
profile, so there is also always an active_profile (this makes the code
more simple). However, module-coreaudio-device did not create a profile
yet, causing a crash of PulseAudio when used on OS X. This patch fixes
this crash, by adding a single "On" profile. I've also added a TODO for
adding an "Off" profile which removes all sinks and sources -- I can
work on resolving this TODO later on.
As these functions are called together and are related, we might merge
them and call setting_select from pa_alsa_path_select by passing
optional pa_alsa_setting argument.
Make also the setting_select static as it is not called outside of
alsa-mixer.c after this change.
[Additional note from Tanu Kaskinen: this change improves the
mute-during-activation feature, because now the mixer changes related
to selecting the setting happen while the hw is muted.]
Move pa_alsa_setting_select call just after the pa_alsa_path_select in
[sink | source]_set_port_cb functions as there is no dependency to volume
calculations that are done between these two calls. Idea here is to make
possible to merge these two functions since they are called together from
other places too.
It's assumed in a couple of places that entry_read()
initializes entry->profile to a non-NULL string. This patch
makes those assumptions hold.
Tested-by: Mikel Astiz <mikel.astiz.oss@gmail.com>
module-card-restore now saves the latency offsets.
This change includes a entry version bump.
The entry now consists of a port count and a port name and offset for
every port that belongs to the relevant card.
This is a basic module for enabling loopback as soon as a new bluetooth A2DP
source is created. The module is given a source and a media role using command
line. This allows module-intended-roles or module-device-manager to choose a
target sink for the stream.
At module-loopback load, if no sink is given, the default sink is used. If the
stream has a media.role property, the property cannot be used because a the
source or sink is forced to default. Both module-intended-roles and
module-device-manager are affected. The same apply to sources.
With this patch, if sink or source is missing, routing modules can be used.
I forgot half of the front headphone patch, i e, to hide the
speaker output when the front headphone is connected. Thanks to
Shih-Yuan Lee for noticing.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This makes updating of permissions on existing directories optional with
pa_make_secure_dir() and pa_make_secure_parent_dir(). This makes sure
that the recursive directory creation doesn't end up modifying existing
directories, and also fixes a problem where creating an auth cookie
(specifically ~/.esd_auth) would end up modifying permissions on ~.
Thanks to Frédéric Danis for reporting this.
Many desktops have headphone on the front and line outs on the back.
Sometimes this means that the headphone is labelled "Front Headphone Jack",
but the volume controls are only "Headphone Playback Volume", i e,
without the "Front" prefix.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Some devices have inverted right channel, so when you add left and right,
the result is silence, or very faint sound. In recent kernels (3.5,
perhaps also 3.4) these are starting to be marked with a special
"Inverted Internal Mic" capture switch.
While we might want to add some reverse summing mechanism in the
future, for now, we just turn the thing off to avoid the problem of
recording silence.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
For kernel 3.6, "phantom jack" kctls have been added. They serve as
a marker that a particular port exist. They were made so we can detect
that there actually are speakers and internal mic on a laptop, even if
there are no other indications (volume controls etc).
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Several laptops have speaker ports, and/or internal mic ports, but we have
no way of detecting that. So we make the port(s) always show up for these
devices.
BugLink: https://bugs.launchpad.net/bugs/946232
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
In practice there is always at least one profile, and I
don't think there will ever be cards without profiles.
Therefore, I added assertions to pa_card_new() stating that
the card new data must always contain at least one profile.
Now a lot of code can be simplified, because it's guaranteed
that the profiles hashmap and the active_profile field are
always non-NULL.
module-tunnel doesn't care about the proplist contents, so
pa_tagstruct_get_proplist() is only used for removing the
data from the tagstruct buffer. In that case it's more
convenient to just pass NULL as the proplist argument.
PropertyChanged signal of org.BlueZ.MediaTransport is processed in
pa_bluetooth_transport_parse_property() which updates t->nrec.
This is called by :
- First by filter_cb() of bluetooth-util.c
- Then by filter_cb() of module-bluetooth-device.c which retrieve value
of t->nrec before calling parse function, then it checks if t->nrec
has changed before updating bluetooth.nrec property.
As t->nrec has alreday been changed during first process, property
update is never performed.
This patch creates a new hook in pa_bluetooth_transport called
PA_BLUETOOTH_TRANSPORT_HOOK_NREC_CHANGED.
The hook is fired by bluetooth-util.c when the transport's NREC
property changes.
module-bluetooth-device.c won't listen the PropertyChanged signal of
MediaTransport anymore. Instead, it will use the hook in
pa_bluetooth_transport to get a notification when the NREC property
changes, and update the sink or source proplist accordingly.
const qualifier for returned pointer of
pa_bluetooth_discovery_get_transport() is removed.
The bluetooth device should have ports so we can attach a latency to
the ports.
Every profile (a2dp, hsp...) has his own set of ports depending on the
number of sinks and sources it provides.
I doesn't make sense to require all callers of
pa_device_port_new() to create the hashmap themselves. There
are and there will be no cases where a port without any
profiles would be desired.
Compilation with -DDEBUG_TIMING fails due to a missing header:
modules/alsa/alsa-source.c: In function 'check_left_to_record':
modules/alsa/alsa-source.c:426:9: warning: implicit declaration of function 'raise' [-Wimplicit-function-declaration]
modules/alsa/alsa-source.c:426:9: error: 'SIGTRAP' undeclared (first use in this function)
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Compilation with -DDEBUG_TIMING fails due to a missing header:
modules/alsa/alsa-sink.c: In function 'check_left_to_play':
modules/alsa/alsa-sink.c:453:9: warning: implicit declaration of function 'raise' [-Wimplicit-function-declaration]
modules/alsa/alsa-sink.c:453:9: error: 'SIGTRAP' undeclared (first use in this function)
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
[These symbols were removed in libudev.so.1.0.0. Replace them with
hardcoded strings. -- heftig]
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
When a Bluetooth headset is connected only to HFP profile (not connected
to A2DP) and host streams to it, a crash occurs if host disconnects.
When HFP disconnects, audio thread will fail on POLLHUP then generate
a message to set PA profile to Off before ending.
If this message is managed before PA unload bluetooth device module,
all works fine.
But, if this message is managed during module unload, this finish by
re-entrance in release code (stop_thread) and a crash.
This fix prevents to process profile change when module is unloading.
