pa_sink_input_update_proplist() is inconvenient in many cases, because
it requires allocating a new proplist, even if the goal is to just set
one property. pa_sink_input_update_properties also can't properly log
property changes, because it has to assume that all values are
arbitrary binary data.
This patch adds pa_sink_input_set_property() for setting a string
value for a single property, and pa_sink_input_set_property_arbitrary()
for setting a binary value for a single property.
pa_sink_input_update_properties() is reimplemented as a wrapper around
pa_sink_input_set_property_arbitrary() to centralize logging and
sending change notifications.
(The above mentions only sink input functions for brevity, but the
same changes are implemented for source outputs too.)
Before a device is unlinked, the unlink hook is fired, and it's
possible that a routing module tries to move streams to the unlinked
device in that hook, because it doesn't know that the device is being
unlinked. Of course, the unlinking is obvious when the code is in an
unlink hook callback, but it's possible that some other module does
something in the unlink hook that in turn triggers some other hook,
and it's this second hook where the routing module may get confused.
This patch adds an "unlink_requested" flag that is set before the
unlink hook is fired, and moving streams to a device with that flag
set is prevented.
This patch is motivated by seeing module-device-manager moving a
stream to a sink that was being unlinked. It was a complex case where
an alsa card was changing its profile, while an echo-cancel sink was
connected to the old alsa sink. module-always-sink loaded a null sink
in the middle of the profile change, and after a stream had been
rescued to the null sink, module-device-manager decided to move it
back to the old alsa sink that was being unlinked. That move made no
sense, so I came up with this patch.
This gets rid of an error message from the debug log. If
volume_factor_source would actually be used somewhere, this bug would
have caused more severe problems.
volume_factor_source should have the source's channel map. When moving
the stream, the volume needs to be remapped from the old source's
channel map to the new source's map. However, when the stream is being
moved, there is a period where the old source has already been
forgotten and the new source isn't yet known, so the remapping can't
be done directly between the two channel maps. Instead, the volume is
remapped from the old source's map to the stream's own map when the
move starts, and again remapped from the stream's map to the new
source's map when the move finishes.
The first remapping was missing, causing the second remapping fail and
print an error to the log.
(I checked the sink input code as well. It didn't have this bug.)
Applying the volume after resampling means mismatch between the volume
channel map and the data channel map.
volume_factor_source is not currently used anywhere, so this bug
hasn't been causing any problems. I noticed it while reading the code.
The resampler framework just forwards the request to the lfe filter.
There are no resampler impl that can rewind yet, so just reset the
resampler impl instead of properly rewinding yet.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Add a user defined parameter lfe-crossover-freq for the lfe-filter,
to pass this parameter to the lfe-filter, we need to change the
pa_resampler_new() API as well.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
FSF addresses used in PA sources are no longer valid and rpmlint
generates numerous warnings during packaging because of this.
This patch changes all FSF addresses to FSF web page according to
the GPL how-to: https://www.gnu.org/licenses/gpl-howto.en.html
Done automatically by sed-ing through sources.
supresses a warning when compiling with NDEBUG:
pulsecore/aupdate.c: In function 'pa_aupdate_read_end':
pulsecore/aupdate.c:82:14: warning: variable 'n' set but not used [-Wunused-but-set-variable]
unsigned n;
pulsecore/sink-input.c: In function 'pa_sink_input_unlink':
pulsecore/sink-input.c:648:27: warning: variable 'p' set but not used [-Wunused-but-set-variable]
pa_source_output *o, *p = NULL;
pulsecore/sink-input.c: In function 'find_filter_sink_input':
pulsecore/sink-input.c:1523:14: warning: unused variable 'i' [-Wunused-variable]
unsigned i = 0;
pulsecore/sink-input.c: In function 'pa_sink_input_start_move':
pulsecore/sink-input.c:1569:27: warning: variable 'p' set but not used [-Wunused-but-set-variable]
pa_source_output *o, *p = NULL;
CC pulsecore/libpulsecore_5.0_la-sink.lo
pulsecore/sink.c: In function 'pa_sink_unlink':
pulsecore/sink.c:673:24: warning: variable 'j' set but not used [-Wunused-but-set-variable]
pa_sink_input *i, *j = NULL;
pulsecore/source-output.c: In function 'find_filter_source_output':
pulsecore/source-output.c:1179:9: warning: unused variable 'i' [-Wunused-variable]
int i = 0;
CC pulsecore/libpulsecore_5.0_la-source.lo
pulsecore/source.c: In function 'pa_source_unlink':
pulsecore/source.c:616:27: warning: variable 'j' set but not used [-Wunused-but-set-variable]
pa_source_output *o, *j = NULL;
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
This makes it easy to log a message every time the reference ratio
changes. I also need to add a hook for reference ratio changes, but
that need will go away if the stream relative volume controls will be
created by the core in the future.
Forcing all volume changes to go through set_volume_direct() makes
it easier to check where the stream volume is changed, and it also
allows us to have only one place where notifications for changed
volume are sent.
Forcing all reference volume changes to go through
set_reference_volume_direct() makes it easier to check where the
reference volume is changed, and it also allows us to have only one
place where notifications for changed reference volume are sent.
"i->save_muted = i->save_muted || mute" makes no sense. The intention
was most likely to use "save" instead of "mute" in the assignment.
This line originates from reverting the volume ramping code, commit
8401572fd5.
The idea of "i->save_muted |= save" is that even if the mute state
doesn't change, save_muted should still be updated, but only if the
transition is from "don't save" to "save".
Changing "!i->muted == !mute" to "mute == i->muted" is cosmetic only.
The rationale behind the old form was probably that when we still had
pa_bool_t, booleans could in theory be defined as int, so comparing
the values without the ! operator was not entirely safe. That's
unnecessary now that we use the standard bool type, which can only
have values 0 or 1.
Steps to reproduce:
1) Leave LFE remixing disabled (the default)
2) Start playback of stereo material on e g 5.1 surround, notice nothing in LFE
3) Now change profile to e g 4.0 surround and then back to 5.1 surround
4) Notice that LFE channel is now remixed
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
A segfault was reported on this line:
pa_return_val_if_fail(PA_SINK_IS_LINKED(pa_sink_get_state(data->sink)), -PA_ERR_BADSTATE);
After expanding the pa_sink_get_state() macro, the line looks like
this:
pa_return_val_if_fail(PA_SINK_IS_LINKED(data->sink->state), -PA_ERR_BADSTATE);
So data->sink was apparently NULL. That could happen if we try to fall
back to the default sink, but format negotiation fails.
This bug was introduced in commit
71816ecb7f.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=74646
The "fix flags" (PA_SINK_INPUT_FIX_FORMAT etc.) don't work properly
with the pa_stream_new_extended() interface. This patch fixes it so
that the same effect can be achieved by leaving some of the PCM
parameters unspecified in format info objects. Also, when converting
a sample spec to a format info when using the old pa_stream_new()
interface, the "fix flags" are taken into account in that conversion.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=68952
It's bad form to assume in free() that any member of the struct has
been initialized. I ran into problems with this when I reordered
things in pa_sink_input_new() and pa_source_output_new().
If a capture stream captures from a single sink input (so the capture
stream is a so called "direct on input" stream), then it needs to
connect to the monitor source of the sink to which the sink input is
connected. Previously the correct source was not figured out
automatically, causing the capture stream creation to fail.
This patch replaces every occurrence of '){' with ') {'.
The ffmpeg source tree was excluded since it will disappear anyways.
Command used for this:
find . -type d \( -name ffmpeg \) -prune -o \
-regex '\(.*\.[hc]\|.*\.cc\)' \
-exec sed -i -e 's/){/) {/' {} \;
This fixes a later assertion failure in module-stream-restore.
Buglink: https://bugs.launchpad.net/bugs/896602
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
idea is to allow optimized code path (similar to volume code)
and rework/specialize mixing cases to enable runtime performance improvements
no functionality changes in this patch
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
This makes sure we don't try to plug in a passthrough stream if the
final sink/source sample spec doesn't match what we want. In the future,
we might want to change rate updates to try a full sample spec update
for passthrough streams.
https://bugs.freedesktop.org/show_bug.cgi?id=50951
Misbehaving clients can try to set a filter sink to output to
itself, leading to crashes later on. This patch protects us from that.
Thanks to Roman Beslik for testing and finding an error in the first
version of this patch.
Tested-by: Roman Beslik <rabeslik@gmail.com>
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=44397
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This allows clients to get a "fake" sample space for compressed formats
that we can support. This should make size/time conversion for things
like calculating buffer attributes simpler.
These utility functions could be handy to clients.
pa_format_info_to_sample_spec_fake() isn't made public, but the return
value is changed to keep in sync with pa_format_info_to_sample_spec().
If a *_UNLINK_POST hook causes a sink-input/source-output's sink/source
to go away, the subsequent attempt to update the sink/source status will
cause an assert. We deal with this by checking the sink/source status
before trying to update it.
Basically adds code to handle passthrough sources. This isn't a tested
path at the moment, but in the future, when we do wish to support these,
it'll save us the trouble of having to sync all the code again.
Avoid resampling or use integer resampling when supported by the
sinks/sources
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
