In a setup with one or more filter sinks or sources there is always at
least one stream existing. In such a situation normal mempool
vacuuming never happens. This patch causes suspend-on-idle module to
vacuum memory when ever it notices that all sinks and sources are
suspended. The behavior can be enabled with a module parameter.
This updates the tunnel module for protocol version >= 19.
module-tunnel-sink does not proxy server-side passthrough support (yet).
This would require a few more changes, namely keeping track of what
formats are available and if any other sink inputs are connected on the
server-side.
This was just introduced for debugging and should not have been in the
final commit. Won't make a difference at the moment since this function
is used as a pointer, but removing this in case we change this in the
future.
PA_ALIGNED can't always guarantee that the alignment we want (the GCC
man page suggests that the linker might not be able to meet the
alignment requirements we desire). Instead, we now allocate some extra
memory and guaratee that the alignment we require is met.
(Based on Colin's review) We mark modules as being autoloaded so that
they can handle this as a special case if needed (which is required by
module-echo-cancel for now). This inverts how things were done and makes
using these modules manually less error-prone.
Since we currently have two mechanisms to signal a passthrough
connection (non-PCM format or PA_SINK_INPUT_PASSTHROUGH flag), we move
all the related checks into functions and use those everywhere.
This makes things more consistent, and should we decide to get rid of
the flag, we only need to change pa_sink_input_*_is_passthrough()
accordingly.
When a passthrough sink-input is added, we need to reconfigure the
sink's sample rate since no resampling occurs. We revert to the original
rate when the passthrough sink-input is removed.
This removes the passthrough flag from sinks since we will drop
exclusively passthrough sinks in favour of providing a list of formats
supported by each sink. We can still determine whether a sink is in
passthrough mode by checking if any non-PCM streams are attached to it.
This is the beginning of work to support compressed formats natively in
PulseAudio. This adds a pa_stream_new_extended() that takes a format
structure, sends it to the server (=> protocol extension) and has the
server negotiate with the appropropriate sink to figure out what format
it should use.
This is work in progress, and works only with PCM streams. Actual
compressed format support in some sink needs to be implemented, and
extensive testing is required.
More details on how this is supposed to work is available at:
http://pulseaudio.org/wiki/PassthroughSupport
(Based on Colin's review) We mark modules as being autoloaded so that
they can handle this as a special case if needed (which is required by
module-echo-cancel for now). This inverts how things were done and makes
using these modules manually less error-prone.
When using transport configured via Media API sample spec needs to be
updated since codec configuration may affect it when e.g. headset
configure a different frequency or number of channels from default.
If u->connections isn't empty when module-dbus-protocol is
unloaded, then connection_free() is called for the
remaining connections when the idxset is freed.
connection_free() tries to remove the connection from the
idxset, but that fails, because the item has already been
removed from the idxset in this scenario.
The problem is solved by not trying to remove the connection
from the idxset in connection_free(). Instead, whoever wants
to delete connections, has to remove the connection from the
idxset in addition to calling connection_free().
This patch adds a new update mode specifier that can be optionally
given in match rules after the regexp. Property list updates triggered
by the rule will honour the given mode. The two allowed modes are 'merge'
and 'replace', corresponding to PA_UPDATE_MERGE and PA_UPDATE_REPLACE
respectively. If omitted, the mode defaults to PA_UPDATE_MERGE, ie. to
the original behavior.
For example, to force 'media.role' to be overwritten with 'bar' for
streams matching foo you can use an entry like this:
foo replace "bar"
This will really overwrite media.role to bar even if it has already been
set to something else by the application.
Thanks to Krisztian Litkey for the original patch and the description
above. In addition to implementing the new feature, this patch fixes
a number of bugs in the parsing code.
With automaticl filter loading by module-filter-apply, setting the
virtual sink/source to have the "phone" intended role will break routing
when you first connect a phone stream to an ALSA device and then turn on
your Bluetooth headset. This happens because module-intended-roles
doesn't move a stream if it is already on a device that provides the
required role.
This patch introduces a "manual_load" parameter that is meant to be used
when not using module-filter-apply for loading the AEC module. If this
parameter is set, the virtual devices are given the "phone" role, else
we count on module-filter-heuristics to do the right thing.
This makes the core code in the filter-* modules generic enough to be
used on sources or sinks. We need special handling for modules that
introduce more than one sink (for now echo-cancel only).
This makes sure that we handle streams moving between sinks properly. To
do this, we change the way the filter.* properties are handled a little
bit.
Firstly, this splits up the "filter.apply" property into two properties
- "filter.want" and "filter.apply". "filter.apply" acts as before - it
bypasses module-filter-heuristics and directly tells module-filter-apply
what filters are to be applied.
"filter.want" is used to tell module-filter-heuristics what filters the
client wants. The module then decides whether to actually apply the
filter or not (for now, this makes sure we don't apply echo-cancellation
even if requested on phone sinks (where it is assumed AEC is taken care
of or is not required).
Next, we also make sure that we track whether the client set
"filter.apply" or module-filter-heuristics did - and in the latter case,
we recalculate "filter.apply" and then have module-filter-apply apply
the filter if required. This introduces some evil in the form of causing
the move_finish callback to possibly trigger another move, but we
protect for this case (with a property) to be doubly sure of not causing
an infinite loop.
This makes sure that we don't apply AEC on sinks that are already
connected to a "phone" device, the assumptiong being that anything
marked as such either doesn't have need it, or handles it itself.
This value is passed on to the instances of module-coreaudio-device that
are loaded upon device detection. The value is purely optional, as the
device module will fall back to to its default if it's not given.
Adds an autoclean option (defaults to TRUE) that controls whether
module-filter-apply cleans up unused modules or not. This is useful in
cases where you know that a filter will be used often and thus can avoid
overhead from repeated module load/unload.
This brings more uniformity to arguments to match module-echo-cancel
(which needs both sink and source masters, hence the disambiguation).
This will allow other modules to load filters in a more uniform way
in the future without kludges to deal with variation in arguments.
When volume changes in bluetooth device PulseAudio volume is rounded
one too low, so if bluetooth headset changes volume and that volume
is immediately set again for bluetooth device, bluetooth step drifts
lower all the time. Volume is incremented by one in the conversion so
that we get right bluetooth step when re-applying volume.
Signed-off-by: Juho Hämäläinen <ext-juho.hamalainen@nokia.com>
This module implements a simply policy decision that any newly plugged
in devices should be used.
This is a reasonable approach and paprefs will be updated to allow for
this option to be turned on or off.
This is more or less a stop-gap solution. When priority lists are
implemented in the core, then policy modules may ultimately be
re-engineered to adjust the priority lists rather than doing any of
their own routing per-se.
Previously the userdata for the volume callbacks was saved to
pa_core.shared only once when loading module-bluetooth-device, and only when
the SCO over PCM feature was used. That breaks volume handling in cases where
the HSP profile is used without the SCO over PCM setup. Now the userdata is
set always when a sink or source is created, and removed when a sink or source
is removed.
The current implementation is totally bogus, it cast the over_sink
userdata to the bluetooth-device userdata... It was failing nicely
because the previous code had a gentle safe-guard in u->profile ==
PROFILE_HSP, and u->profile was just random.
There is no easy way to associate additional data to a sink or
source. Two solutions seems possible: looking up loaded modules and
check which one was handling the sink/source, or using pa_shared. I
went for the second solution.
