- As discussed on alsa-devel it's probably better to initialize the
buffer size first, followed by the period size. If that fails try the
other way round. If that fails try to configure only buffer size. If
that fails try to configure only period size. Finally, try to
configure neither.
- Don't require integral periods anymore.
Both of these changes should help improving compatibility with various
weirder sound devices, such as TV cards.
Exponentially increase the amount of time between smoother updates. We start
with a 2ms interval and increase up to 200ms intervals.
Smoother updates and the resulting linear regression take a fair amount of CPU
so we want to reduce the amount of updates.
- We now implement a logic where the sink maintains two distinct
volumes: the 'reference' volume which is shown to the users, and the
'real' volume, which is configured to the hardware. The latter is
configured to the max of all streams. Volume changes on sinks are
propagated back to the streams proportional to the reference volume
change. Volume changes on sink inputs are forwarded to the sink by
'pushing' the volume if necessary.
This renames the old 'virtual_volume' to 'real_volume'. The
'reference_volume' is now the one exposed to users.
By this logic the sink volume visible to the user, will always be the
"upper" boundary for everything that is played. Saved/restored stream
volumes are measured relative to this boundary, the factor here is
always < 1.0.
- introduce accuracy for sink volumes, similar to the accuracy we
already have for source volumes.
- other cleanups.
Error from snd_pcm_rewind() might mean we just woke up from suspend and
didn't have a chance to try to recover the stream since we didn't write
to it in between. Call try_recover() in such cases.
Note that for this to work kernel must return ESTRPIPE instead of EBADF
for rewind/forward attempts on suspended streams, so that
snd_pcm_recover() can recognize it should snd_pcm_resume() the stream.
This is not the case yet (2.6.31-rc5), patch is available.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Completely rework mixer logic. This now allows controlling a full set of
elements from a single sink's volume slider/mute button.
This also introduces sink and source "ports" that can be used to choose
different input or output ports with the UI. (i.e. "mic"/"line-in" or
"speaker"/"headphones".
The mixer paths and device maps are now configered in external
configuration files and can be tweaked as necessary.
The reference volume is to be used as reference volume for stored stream
volumes. Previously if a new stream was created the relative volume was
taken relatively to the virtual device volume. Due to the flat volume
logic this could then be fed back to the virtual device volume.
Repeating the whole story over and over would result in a device volume
that would go lower, and lower and lower.
This patch introduces a 'reference' volume for each sink which stays
unmodified by stream volume changes even if flat volumes are used. It is
only modified if the sink volumes are modified directly by the user.
For further explanations see http://pulseaudio.org/wiki/InternalVolumes
The primary reason for this change is to allow time graphs that do not
go through the origin and hence smoothing starting from the origin is
not desired. This change will allow passing time data into the smoother
while paused and then abruptly use that data without smoothing using the
'quick fixup' flag when resuming.
Primary use case is allowing recording time graphs where the data
recorded originates from a time before the stream was created. The
resulting graft will be shifted and should not be smoothened to go
through the origin.
On Fri, Mar 27, 2009 at 7:21 AM, Lennart Poettering <lennart@poettering.net> wrote:
>> I tried installing the latest git sources on my Ubuntu Jaunty box but
>> it just broke sound in all my applications. For my own purposes, I'm
>> going to need to start with the Ubuntu-patched 0.9.14. However, if
>> you are willing to accept this patch I will forward port it so that it
>> applies to the latest sources. It's a completely harmless change, so
>> why not apply it?
>
> Yes, I am happy to apply it. Could you please update it for current git?
>
Great. An updated patch is attached. For symmetry, I added this
option to the alsa source module as well.
The Ubuntu folks have customized pulse so much that it is difficult
for me to get this version working on my system. For this patch I
have only made sure that it compiles. But it does pretty much the
same thing as the one for 0.9.14, which is working great for me.
Thanks,
Kyle
