* Enable macOS specific modules (module-bonjour-publish,
module-coreaudio-detect and module-coreaudio-device)
* Correctly set `PA_SOEXT` (.so, .dylib and .dll)
* Build `poll-posix.c` and `semaphore-osx.c`
* Drop linker flag `-Wl,-z,nodelete` on Darwin
* Drop linker flag `-Wl,--no-undefined` on Darwin
* Prefer to `clock_gettime` over compat impl for old Darwin
* Disable SCM credential on Darwin
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/746>
Rate adjustment timer is set up when combine sink is resumed and relased when
combine sink is suspended. Do not create this timer again while module is loaded
to prevent duplicate effort causing assertion in time_callback.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/756>
Faststream backchannel decoder does not know whether incoming stream is mono or
stereo before first packet is decoded, and some devices return stereo stream.
As it is not easy to change source sample spec after source is created, use
stereo sample spec always and perform conversion if mono stream is found.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/628>
When a stream is started but has not yet called smoother_2_put(), pa_smoother_2_get()
returns the time since the start of the stream even if the stream was started paused.
When the stream is started paused, pa_smoother_2_get() should return 0 instead. This
patch fixes the problem.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/745>
When `indicator` is initialized to `1`:
- it always succeeds the `indicator == CIND_CALL_INDICATOR` check;
- hence always calls `continue`;
- hence never reaches the end of the `while` loop where `indicator++` is
called;
- hence `indicator` never contains any other value than `1` meaning
`cind_enabled_indicators` is ever updated.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/740>
This reverts commit b05e34e092.
Now that backend-native uses a different way to get to its own
`native_backend` instance - without going through
`pa_bluetooth_discovery` - this patch can be reverted again, as nothing
outside bluez5-util is supposed to know the internals of this struct.
That's what the many functions are for which all take pointers to this
(at that point) opaque struct instead.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/740>
This removes the inverse/recursive dependency of backend-native on the
`pa_bluetooth_discovery` struct, which is supposed to be opaque outside
of `bluez5-util` in favour of the many accessor functions defined in
`bluez5-util.h`.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/740>
Fix the following build failure without C++:
../output-1/build/pulseaudio-16.1/meson.build:1:0: ERROR: Unknown compiler(s): [['/home/autobuild/autobuild/instance-1/output-1/per-package/pulseaudio/host/bin/powerpc64-buildroot-linux-gnu-g++']]
The following exception(s) were encountered:
Running "/home/autobuild/autobuild/instance-1/output-1/per-package/pulseaudio/host/bin/powerpc64-buildroot-linux-gnu-g++ --version" gave "[Errno 2] No such file or directory: '/home/autobuild/autobuild/instance-1/output-1/per-package/pulseaudio/host/bin/powerpc64-buildroot-linux-gnu-g++'"
Fixes:
- http://autobuild.buildroot.org/results/6526a21bd4da3b8458188f27c1ec04c381e4b673
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/737>
AT+BIA is used to enable/disable CIND indicators by Bluetooth HFP spec.
By default, all indicators are enabled on connection.
AT+BIA will configure which indicators should be disabled then,
the disabled indicators may be enabled later on again with AT+BIA.
When the connection is lost and recovered, all indicators are enabled
again. The HF will reconfigure the indicators again with an AT+BIA
command.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/631>
Add libatomic_ops dependencies to libraries/modules that showed a
failure on an arch that does not have native atomic operations support.
Not all optional dependencies were tested, so it is possible that
some optional modules are still missing libatomic_ops dependencies.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/732>
Attempting to use atomics operations on an architecture that does not
support them generally results in a link error:
ld: /tmp/ccjYcMPP.o: in function `func':
testfile.c:(.text+0x1c): undefined reference to `__sync_bool_compare_and_swap_4'
The current build system uses cc.compiles() to check if atomic ops are
supported, but cc.compiles() does not attempt to link, so the test fails
to enable libatomics_opts.
Fix this by using cc.links() instead of cc.compiles().
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/732>
The full identifier check must be executed for the new melem
creation, otherwise the duplicate control element code check
is reached.
Example (using the snd-aloop driver):
numid=56,iface=PCM,name='PCM Notify',device=1,subdevice=1
numid=62,iface=PCM,name='PCM Notify',device=1,subdevice=2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/730>
The new helem must be tracked and old helem must be cleared
to make the code work properly. Introduce the pointer to helem
as the private value for melem and add the necessary code.
Also, add a check for the duplicate mixer elements. The duplicate
mixer element invokes the abort check in alsa-lib. Print a warning
instead and handle the exit gracefully.
Fixes: def8eb074 ("alsa-mixer: allow to re-attach the mixer control element")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/730>
Right now we try to add all UCM devices of a verb to a single profile.
But if some devices using different PCMs are configured as conflicting
with one another, we will only be able to utilize one of them, chosen
seemingly based on the order in the UCM config file.
This is not a problem with conflicting devices sharing a PCM, as they
are assigned to the same mapping and the ports mechanism only enables
one of them to be active at a time.
To utilize all devices in a UCM verb even when there are conflicting
devices using different PCMs, calculate subsets of devices which
can be simultaneously used and create a profile for each such set.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
While switching profiles, it was enough to switch UCM verbs since that
disables all enabled UCM devices and every profile had a distinct verb.
However, switching to the current verb does not disable any devices.
To support multiple profiles for a verb we need to explicitly disable
the old profile's devices, since they might be conflicting with the new
profile's devices and will prevent them from being enabled. Compare both
profiles' mappings, and disable the devices not in the new mappings.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
