Steps to reproduce:
1) Leave LFE remixing disabled (the default)
2) Start playback of stereo material on e g 5.1 surround, notice nothing in LFE
3) Now change profile to e g 4.0 surround and then back to 5.1 surround
4) Notice that LFE channel is now remixed
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This makes sure that there is no window between pa_sink/source_new()
and _put() where enumerating sinks/sources causes an assert (several
calls in sink/source_get_info need a linked sink or source).
A segfault was reported on this line:
pa_return_val_if_fail(PA_SINK_IS_LINKED(pa_sink_get_state(data->sink)), -PA_ERR_BADSTATE);
After expanding the pa_sink_get_state() macro, the line looks like
this:
pa_return_val_if_fail(PA_SINK_IS_LINKED(data->sink->state), -PA_ERR_BADSTATE);
So data->sink was apparently NULL. That could happen if we try to fall
back to the default sink, but format negotiation fails.
This bug was introduced in commit
71816ecb7f.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=74646
This fixes a build error with mingw32:
pulsecore/.libs/libpulsecommon_4.99_la-lock-autospawn.o: In function `unref':
/home/abuild/rpmbuild/BUILD/pulseaudio-4.99.2/src/pulsecore/lock-autospawn.c:123: undefined reference to `pa_thread_free_nojoin'
collect2: error: ld returned 1 exit status
pa_thread_free_nojoin() was initially only implemented for the pthread
based pa_thread backend, because it was incorrectly assumed that
autospawning (the only user of pa_thread_free_nojoin()) is not used on
Windows.
Reported-By: Michael DePaulo <mikedep333@gmail.com>
Reintroduces a cleaned-up version of commit 30ce3a14e5 which
was reverted by 1ce71cbd82; for more information see
http://thread.gmane.org/gmane.comp.audio.pulseaudio.general/17479/focus=17487
The patch intends to reduce computational load when resampling AND remapping. The PA
resampler performs the following steps:
sample format conversion -> remapping -> resampling -> sample format conversion
In case the number of output channels is higher than the number of input channels, the
resampler has to be run more often than necessary. E.g. in case of mono to 4-channel remapping,
the resampler runs on 4 channels separately.
To ímprove this, the PA resampler pipeline is made adaptive:
if out-channels <= in-channels:
sample format conversion -> remapping -> resampling -> sample format conversion
if out-channels > in-channels:
sample format conversion -> resampling -> remapping -> sample format conversion
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
the patch changes the interface of the (internal) fit_buf() function:
fit_buf() manages the memblock of the buf chunk, it reallocates the memblock
if the requested number of bytes ('len') if larger than the memblock's size ('size')
and optionally preserves 'copy' bytes
the code should be in line with the comment now
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
rindex() appears to be "non-standard" to an extent, and it caused a
build failure on mingw32.
From the man page of rindex(): "POSIX.1-2008 removes the
specifications of index() and rindex(), recommending strchr(3) and
strrchr(3) instead."
The "fix flags" (PA_SINK_INPUT_FIX_FORMAT etc.) don't work properly
with the pa_stream_new_extended() interface. This patch fixes it so
that the same effect can be achieved by leaving some of the PCM
parameters unspecified in format info objects. Also, when converting
a sample spec to a format info when using the old pa_stream_new()
interface, the "fix flags" are taken into account in that conversion.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=68952
The function will be used in pa_sink_input_new() and
pa_source_output_new() to convert the sample spec given by the client
to a format info object. The set_format, set_rate and set_channels
will be set according to the stream flags (PA_SINK_INPUT_FIX_FORMAT
etc.).
The function will be used in pa_sink_input_new() and
pa_source_output_new(). The fallback parameters are used to merge the
data in the format info with the sink/source sample spec and channel
map, when the format info is lacking some information.
This also fixes an issue in pa_format_info_to_sample_spec(): it did
no validation for the channels value. Now the validation is taken care
of in pa_format_info_get_channels().
This also fixes an issue in pa_format_info_to_sample_spec(): it did
no validation for the rate value. Now the validation is taken care of
in pa_format_info_get_rate().
I will need to use the function from outside libpulse.
I added the channel map argument, because the function will be called
from another function that is expected to initialize the channel map.
I don't know if it's in practice necessary, but it shouldn't do any
harm either.
The journal is a component of systemd, that captures Syslog messages,
Kernel log messages, initial RAM disk and early boot messages as well
as messages written to STDOUT/STDERR of all services, indexes them and
makes this available to the user.
It can be used in parallel, or in place of a traditional syslog daemon,
such as rsyslog or syslog-ng.
The journal offers a couple of improvements over traditional logging
facilities (e.g. advanced filtering capabilities).
This patch adds support for logging directly to the journal using its
native API.
I think this makes the code a bit nicer to read and write. This also
reduces the chances of off-by-one errors when checking the bounds of
channel count values.
I think this makes the code a bit nicer to read and write. This also
reduces the chances of off-by-one errors when checking the bounds of
sample rate values.
I think this makes the code a bit nicer to read and write. This also
reduces the chances of off-by-one errors when checking the bounds of
the sample format value.
set_scheduler() assumes that if sys/resource.h was found then we will
find RLIMIT_RTTIME there, but this is a non-POSIX extension on Linux.
Change the check to ensure that RLIMIT_RTTIME is actually defined.
Linux indeed defines this as a macro, and POSIX specifies that the other
RLIMIT_ constants must be macros, so having this as an #ifdef seems
correct.
by using pa_modargs_get_sample_rate() we avoid inconsistant validity
checking of the sample rate in various places
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
buf in struct ffmpeg_data is reset() initially and freed, but never
actually used
when a new block is allocated ffmpeg_data->buf[c].length is used
(which is always 0) to compute the new block size
so, drop buf
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
When setting attribute foo, or in this case the card profile, in my
opinion the thing passed to the set_foo() function should be of the
type of foo, not a string identifier that can be used to search for
the actual foo in set_foo().
This is mostly a question of taste, but there's at least some small
benefit from passing the actual object: often the profile object is
already available when calling pa_card_set_profile(), so passing the
card name would cause unnecessary searching when pa_card_set_profile()
needs to look up the profile from the hashmap.
Don't call pthread_join() to join a thread from a different
process than the thread was created in. Doing so can lead to
undefined behaviour.
On OpenBSD, the symptom was a pulseaudio process with a single
thread waiting forever for other threads to join. Since that
process also held the autospawn lock, starting new pulseaudio
processes with --start kept failing. The problem was analyzed
with help from Philip Guenther.
This patch adds a pa_thread_free_nojoin() function which can
be used to free resources for a thread without a join, as
suggested by Tanu Kaskinen.
See https://bugs.freedesktop.org/show_bug.cgi?id=71738
f434087e42 introduced the potential to not select a card profile if
all the profiles were marked as unavailable.
While this is very unlikely, it's a theoretical posibility, so if the
initial choice of a profile fails, try harder.
