For enumerated controls of type `libcamera::ControlTypeInteger32`, libcamera
provides the names of the enumerators, so add them to `SPA_PROP_INFO_labels`.
If the `libcamera::ControlInfo` object explicitly lists the values of a
control, then use those values when adding `SPA_PROP_INFO_type` to
construct an enumerated choice object.
If libcamera does not provide a default value, then the average of the
minimum and maximum values is taken. The same logic is duplicated for
`float` and `int32_t`, so move it into a function template.
`SPA_POD_CHOICE_Bool()` assumes that both true and false are available,
which may not be the case for libcamera controls, so manualy construct
the enumerated choice object and only add the actually available options.
At the moment, the camera manager shared pointer is released when the last
listener is removed, and recreated when the first listener is added. This
is the same behaviour that the alsa and v4l2 monitors implement with their
respective udev, inotify monitors.
However, for `libcamera::CameraManager`, this is likely not the best way
for multiple reasons:
(a) it is a complex object with significant construction and starting cost,
which includes starting threads and usually loading shared libraries;
(b) usually one listener is added right after creating, and it is removed
right before destruction, in which there are real no advantages;
(c) the camera manager, being a shared resource, might very well be kept
alive by some other component, in which case there is again not much
real benefit.
So simplify the code by getting a camera manager reference at the beginning
and keeping it until the libcamera monitor is destroyed.
This also fixes a race condition where a hot-plugged camera might not have
been detected if the libcamera event was emitted between these two:
collect_existing_devices(impl);
start_monitor(impl);
The `impl::{add,remove}Camera` functions do the same thing except
for one value, the type of the hotplug event. Add a private method
to `impl` that implements the common parts.
An eventfd is used to signal the data loop from the libcamera request
completion event handler. Previously, this eventfd was created and
installed after the camera has been started and requests were queued.
This is problematic because it creates a small time frame where the
libcamera request completion handler will run in a state where the
eventfd is not fully set up.
Fix that by settup up the eventfd before the camera is started.
Currently the plugin uses a single configuration during its entire lifetime.
So generate that configuration during initialization and hold on to it.
This makes the code a bit simpler, and also fixes issues stemming from missed
calls to `spa_libcamera_get_config()` as well as no error checking of
`libcamera::Camera::generateConfiguration()`.
`SPA_PROP_deviceName` is an empty string and setting it does nothing.
`SPA_PROP_device` is always the libcamera identifier of the camera,
and setting it has no effect whatsoever in contrast to other plugins
such as v4l2.
So remove them both for now.
Currently the plugin does not support importing memory and uses
`libcamera::FrameBufferAllocator` to allocate memory. Every file
descriptor is managed by that object, so they must not be closed
manually.
Instead of using an out parameter, just return the `spa_video_colorimetry`
object; and do the libcamera -> spa conversion in a single place, where
the data is actually added to the pod.
Use kernel BT_PKT_SEQNUM (likely in Linux v6.17) to provide the ISO
packets sequence numbers. Fall back to counting packets if kernel is too
old to support the feature.
When we skip the CIEV event in order to update the call list with CLCC,
we may receive multiple +CLCC events or even none, if the calls are
disconnected. To avoid any mistakes, update the hfp_hf_in_progress flag
after the CLCC update is entirely done.
This removes the need to call poll() on the rfcomm socket in order
to wait for replies from the AG.
Use a queue to buffer all the commands that are to be sent to the AG
and match them to replies when they are received. Optionally associate
each command with a DBusMessage that is assumed to be a method call
from the telephony interface, which is then replied to when the rfcomm
command reply is received. Also associate each command with a state,
so that it is always deterministic what gets executed after the reply
is received.
On the telephony module, pass on the DBusMessage on the callbacks and
add a method to allow the receiver to send a reply. Only send FAILED
directly when the callback is not handled. Also, remove the return value
from the Dial() command (it was not advertised on the introspection
anyway) to make things easier.
We can't move the mix_list ports to the free_list like that because the
elements in the list use a different list to link together. Also, we
don't need to free those ports at all because they will be freed when we
move the port_list to the free_list.
When interpolating with rate correction != 1.0, don't floor the
resulting input rate to the nearest smallest integer.
This allows rate corrections < 1/in_rate to have some effect, and
reduces jumps in the response. One of the jumps is inconveniently
between rate=1.0 and rate=1.0+eps and will cause rate corrections to
oscillate if target rate varies close to 1.0.
If phase is float, calculations in impl_native_in_len/out_len can
produce wrong results due to rounding error.
It's probably better to not be in the business of predicting
floating-point rounding, so replace this by fixed-point arithmetic.
Also make sure `offset+1` cannot overflow data->filter array in
do_resample_inter* due to float multiplication possibly rounding up.
If phase is float, calculations in impl_native_in_len/out_len don't
necessarily match with do_resample, because e.g.
float phase0 = 7999.99;
float phase = phase0;
int frac = 8000, out_rate = 8000, n = 64, count = 0;
for (int j = 0; j < n; ++j) {
phase += frac;
if (phase >= out_rate) {
phase -= out_rate;
count++;
}
}
printf("count = %d\n", count); /* count = 64 */
count = (int)(phase0 + n*frac) / out_rate;
printf("count = %d\n", count); /* count = 65 */
don't give the same result.
Also add test where floating point multiplication rounding up to nearest
in
float ph = phase * pm;
uint32_t offset = (uint32_t)floorf(ph);
computation results to offset+1 > data->n_phases, accessing filter array
beyond bounds. (The accessed value is still inside allocated memory
block, but contains unrelated values; the test passes silently.)
Using the parser for the spa_pod_sequence in the data buffers is
required in order to safely read the pods while there could be
concurrent writes.
See #4822
We don't actually need to calculate the GCD for each resampler rate
update. The GCD is only used to scale the in/out rates when using the
full resampler and this we can cache and reuse when we did the setup.
The interpolating resampler can work perfectly fine with a GCD of 1 and
so we can just assume that.
spa_alsa_read is called from the source process function when we are a
follower and no buffer is ready yet.
Part of the rate correction was performed by the ALSA driver when it
woke up but now, the resampler has updated the requested size and we
need to requery it before we can start reading samples.
Otherwise, we end up with requested samples from before the rate update
and we might not give enough samples to the resampler. In that case, the
adapter will call us again and we will again try to produce a buffer
worth of the requested samples, which will xrun.
