Writing a sixel on top of an already existing sixel currently has the
following limitations in foot:
* The parts of the first sixel that is covered by the new sixel are
removed, completely. Even if the new sixel has transparent
areas. I.e. writing a transparent sixel on top of another
sixel *replaces* the first sixel with the new sixel, instead of
layering them on top of each other.
* The second sixel erases the first sixel cell-wise. That is, a sixel
whose size isn’t a multiple of the cell dimensions will leave
unsightly holes in the first sixel.
This patch takes care of both issues.
The first one is actually the easiest one: all we need to do is
calculate the intersection, and blend the two images. To keep things
relatively simple, we use the pixman image from the *new* image, and
use the ‘OVER_REVERSE’ operation to blend the new image over the old
one.
That is, the old image is still split into four tiles (top, left,
right, bottom), just like before. But instead of throwing away the
fifth middle tile, we blend it with the new image. As an optimization,
this is only done if the new image has transparency (P1=1).
The second problem is solved by detecting when we’re erasing an area
from the second image that is larger than the new image. In this case,
we enlarge the new image, and copy the old image into the new one.
Finally, when we enlarge the new image, there may be areas in the new
image that is *not* covered by the old image. These areas are made
transparent.
The end result is:
* Each cell is covered by at *most* 1 sixel image. I.e. the total
numbers of sixels are finite. This is important for the ‘mpv
--vo=sixel’ use case - we don’t want to end up with thousands of
sixels layered on top of each other.
* Writing an opaque sixel on top of another sixel has _almost_ zero
performance impact. Especially if the two sixels have the same size,
so that we don’t have to resize the new image. Again, important for
the ‘mpv --vo=sixel’ use case.
Closes#562
This matches XTerm behavior, and fixes vttest 11.6.6.2:
Test non-VT100 ->
Test ISO-6429 colors ->
Test of VT102-style features with BCE ->
Test of screen features
Since the alt screen have no scrollback, all scrollback-* actions are
effectively no-ops when the alt screen is active.
Make them available to the client application instead.
Closes#573
When we resize the alt screen, we don’t reflow the text, we simply
truncate all the lines.
When doing this, make sure we don’t truncate in the middle of a
multi-column character.
When an auto-detected URL ended *on* the right-most column, the URL
endpoint was off by one, resulting in the underline in URL mode being
one character short.
When enabled, PUA (Private Usage Area) codepoints are always treated
as double-width glyphs, regardless of the actual glyph width.
Requires allow-overflowing-double-width-glyphs=yes
Double-clicking on a word in the left or right margin, would line-wrap
the selection if there was a non-empty cell in the corresponding
right/left margin on the prev/next line. Regardless of whether there
was a hard linebreak or not.
Script to reprouce:
!/bin/bash
cols=$(tput cols)
printf "%*coo\nbar\n" $((${cols} - 2)) f
Run, then double click either “foo” or “bar”. Neither should select
the other part.
Closes#565
This allows you to include sub-configurations. For example, theme
files.
The ‘include’ directive is a top-level keyword. I.e. it cannot be used
inside sections.
* The included file must be specified with an absolute path
* The included file is parsed in its own scope
* Nested includes are allowed
* Multiple include directives are allowed
Closes#555
Long OSC-8 URIs, that are split up over multiple rows, are handled by
emitting one URI range on each row the URL touches.
This was done by initializing a row index variable, and then
incrementing it each loop iteration.
This caused an out-of-bounds array access when the row index reached
the maximum number of scrollback lines.
The fix is simple: make sure the row index variable wraps around,
instead of incrementing without any bounds.
Closes#552
ayl_roundtrip() has the following code:
wl_display_roundtrip(wayl->display);
while (wl_display_prepare_read(wayl->display) != 0)
wl_display_dispatch_pending(wayl->display);
wayl_flush(wayl);
If the first wl_display_roundtrip() fails, for example because the
Wayland socket has been closed, we may get stuck in the while-loop.
This happens if the read queue isn’t empty, in which case
wl_display_prepare_read() will return -1 and we’ll continue trying to
dispatch the pending events forever, never succeeding since the socket
is gone.
Closes#542
echo -e '\e]8;;https://www.foo.bar\e\\https://www.foo\e]8;;\e\\.bar'
will produce an OSC-8 URL (https://www.foo) that is slightly shorter
than the auto-detected one (https://www.foo.bar).
This produces strange results in URL mode. For example, if
url.osc8-underline=always, the OSC8 underline will be removed when
url-mode is exited.
This patch changes the behavior so that auto-detected URLs that
overlap OSC-8 URLs are removed.
Note that OSC-8 URLs cannot overlap with each other, and that
auto-detected URLs also cannot overlap with each other.
Works in pretty much the same way as ‘beam-thickness’, except that the
default value is “the font’s underline thickness”.
This means, that when unset, the cursor underline thickness scales
with the font size.
But, when explicitly set, either to a point size value, or a pixel
size, it remains fixed at that size.
Closes#524
This fixes an issue where we, at least on FreeBSD, sometimes get stuck
in epoll_pwait() after the shell has exited.
It turned out to be because the SIGCHLD signal was delivered at the
same time FDs were made readable/writeable. I.e. epoll_pwait()
returned a non-zero value even though it should have been interrupted
by the SIGCHLD.
To avoid having to search the entire signal array *every time*
epoll_pwait() returns, add a flag that is set in the signal
handler. This tells the FDM to scan the signal array after returning
from epoll_pwait().
So that the value is clamped to the range [0, 0x7fffffff] and retains
the same value, regardless of whether it's interpreted as a signed or
unsigned integer.
Closes#522
Besides disallowing matches that crosses the scrollback wrap-around,
this also fixes a crash when the trying to search beyond the last
output, when the scrollback history hasn’t yet been completely filled.
If the image was accompanied with a “Set Raster Attributes” (SRA)
command, make sure we *never* shrink the image below the size
specified in the SRA.
Images are normally shrunk when their bottom rows are fully
transparent. This enables sixels that aren’t a multiple of 6 to be
emitted, without also emitting an SRA command.
But if there *is* an SRA command, obey it.
Verified against XTerm-367
In some cases, the underline position (typically provided by the font,
mind you), end up below the cell, making it visible.
Note that below the cell here means below the line. I.e. the font
provided underline position is below the font provided line height...
Oh well.
Doing this in foot rather than fcft, since other applications
typically don’t have to clip the rendered text.
Closes#503
Older version of Plasma/KWin had an issue where buffer damage recorded
before the buffer was attached were ignored. This appears to have been
fixed now.
1. Free buffers and strings
2. memset() the vt struct
3. re-initialize members that must not be zero
We _could_ replace the memset() with explicit zeroing of all the
members. It’s just that there’s a lot of arrays, so this is much
easier.
Closes#495
In all other cases, alpha is disabled. This includes:
* Palette- or RGB-colors matching the default background color
* When any kind of reverse video is enabled (e.g. DECSCNM, or ANSI
reverse)
* foot exits with -26/230
* footclient exits with -36/220
This is to give each application a range of exit codes. Currently
unused, but we may want to change this in the future.
Normally, foot and footclient uses the exit code from the client
application (i.e. the shell).
However, foot (or footclient) itself may fail to run; if run outside
of a Wayland session, or no fonts are installed, or the client
application/shell cannot be found (“foot lsdjfldsjf”) etc.
Up until now, there has been no way to differentiate these kind of
failures from the client application exiting with code 1.
This patch changes foot’s failure exit code to -27/229, and
footclient’s to -28/228. Note that footclient will exit with foot’s
-27/229 if footclient ran successfully, but the foot server failed to
instantiate a new window.
Closes#466.
* Rename cursor.style value ‘bar’ to ‘beam’. ‘bar’ remains recognized,
but should eventually be deprecated and then removed.
* Add ‘cursor.beam-thickness’ option, a pt-or-px value specifying the
thickness of the beam cursor. Defaults to 1.5pt.
* Rename (and export) pt_or_px_as_pixels() to
term_pt_or_px_as_pixels()
* Change term_pt_or_px_as_pixels() to round point values instead of
truncating them.
When rendering a selected/highlighted cell where the foreground and
background colors are the same, invert the background color to make
the selected text legible.
Closes#455
