Since tuples are used to define driver private data, the private data
blobs are no longer required.
So, remove the source files required to generate the private
data blobs and the private data blobs.
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the conf file, module private data can be described through
tuples instead of blobs defined by vendor defined structures.
This patch defines the tuple section and the token list. The
tokens are then used to build the tuple array.
The module data may have both driver data and firmware data. The
driver data is passed using the tuple array and the firmware data
using byte data. A descriptor tuple array is defined to describe
the succeeding data block.
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Easily seen when two threads try at the same time, one of them will fail.
The bug was identified by using apulse with Skype.
Fixes: dec428c352 ("pcm: fix 'unable to create IPC shm instance' caused by fork from a thread")
Fixes: https://github.com/i-rinat/apulse/issues/38
Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The documentation specifies three different rounding modes, but this
is wrong, because they all end up calling snd_tlv_convert_from_dB,
which only has two rounding modes.
Signed-off-by: David Henningsson <diwic@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DB410c board has support for both Digital and Analog audio. Digital
audio is over HDMI and analog is over codec chip integrated inside the
APQ8016 SOC.
It can support:
- 3 Microphones: Primary Mic(Handset mic), Headset Mic and Secondary
- 2 Digital Microphones.
- Earpiece.
- Headset.
- Loud Speaker.
- HDMI.
[Riku: squashed Srinivas's patches together and converted spaces to tabs]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Cc: nicolas.dechesne@linaro.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
tplg_copy_data() should set the valid referenced data element pointer
on success. The caller will double check this pointer for all kinds of
references, including controls and data.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A widget may have references to control or data elements. So the message
should not only use "control" here.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Usage of assert() is not better practice of programming as shared library
APIs. They should return appropriate error code to promote applications to
handle error state.
This commit applies condition statements with return value of -EINVAL,
instead of assert(). As a backward compatibility for existent applications,
old APIs still call assert().
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
elem_copy_text() is widely used for string copy in topology. Because some
name fields are not mandatory for users, sometimes the source can be
invalid and we should not do the copy. So we add check here.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds ATTRIBUTE_UNUSED to the unused parameter 'tplg' for
function tplg_parse_streams() and tplg_parse_fe_dai(). These two functions
need to keep 'tplg' as ops for tplg_parse_compound().
The compiler warnings below are fixed:
pcm.c: In function 'tplg_parse_streams':
pcm.c:262:43: warning: unused parameter 'tplg' [-Wunused-parameter]
static int tplg_parse_streams(snd_tplg_t *tplg, snd_config_t *cfg,
^
pcm.c: In function 'tplg_parse_fe_dai':
pcm.c:324:42: warning: unused parameter 'tplg' [-Wunused-parameter]
static int tplg_parse_fe_dai(snd_tplg_t *tplg, snd_config_t *cfg,
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This access flag is used to add controls from user space by ioctl.
But topology only configures controls in user space and these controls
will eventually be created by ASoC in kernel, so topology should not
support this flag.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In this development period, some APIs have already been added. Most of
them are to add an element set, while their names are not so appropriate
against their feature. This is due to following to names of old APIs.
This commit renames them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After the type specific string ("uuid", "string", "byte", "short" and
"word"), users may append a string, like "uuidxxx". The topology parser
will check the first few characters to get the tuple type.
This can allow users to put multiple tuples of the same type into one
vendor tuple section (SectionVendorTuples), e.g. parameters of multiple
firmware modules.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In text conf file, user can define a manifest section and let it refer
to private data sections, in the same syntax as other element types.
The text conf file can have at most 1 manifest section.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Previously in text conf file, the uuid value of vendor tuples is a
16-characer string. Now change it to 16 characters separated by commas,
easier for users to edit it manually.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Code refactor to reduce function calls. Now tplg_copy_data() can look up
a referenced data element and merge its data.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Previously in text conf file, an element can only refer to one data
section (SectionData). Now it can also refer to a list of data sections.
Thus users can split groups of firmware parameters to multiple data
sections, and put them all in the reference list.
Finally, data of these data sections will be merged, in the same order as
they are in the reference list, as the element's private data for kernel.
We still support the original syntax of reference to a single data
section. The doc is updated for the syntax extension.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit applies code format according to typical and moderate rule.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit applies code format according to typical and moderate rule.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit applies code format according to typical and moderate rule.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit applies code format according to typical and moderate rule.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit applies code format according to typical and moderate rule.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit applies code format according to typical and moderate rule.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit applies code format according to typical and moderate rule.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit applies code format according to typical and moderate rule.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit applies code format according to typical and moderate rule.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit applies code format according to typical and moderate rule.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit applies code format according to typical and moderate rule.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keep storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit applies code format according to typical and moderate rule.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Inner this library, implementation of each features can find actual layout
of structures by including local header. Although, mixer feature is written
without the header and as the same way for applications. This brings some
inefficiencies such as usage of alloca() to keep memory objects for the
structures.
This commit includes the header for further improvements in mixer
feature.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of alloca() and automatic variables keeps storages on stack, while
the former generates more instructions than the latter. It's better to use
the latter if the size of storage is computable at pre-compile or compile
time; i.e. just for structures.
This commit obsolete usages of alloca() with automatic variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
