Create the pa_bluetooth_transport structure to store information about
the bluetooth transport and utility functions to manipulate this
structure. The acquire() and release() operations are function pointers
in the pa_bluetooth_transport structure to make possible for different
transport backends to provide different implementations of these
operations. Thre is also a userdata field for the transport backend
provide data for the acquire/release functions.
This commit also creates a new function
pa_bluetooth_device_any_transport_connected() to check if there is any
audio connection between the host and a remote device.
pa_bluetooth_discovery is the struct that holds information about known
Bluetooth audio devices and other information about the Bluetooth stack.
This commit also creates bluez5-util.[ch], which will hold a lot of
utility functions to help with the BlueZ 5 support.
module-bluetooth-proximity has not worked for quite a while, since it
uses pre-BlueZ4 APIs. Nobody complained since then, which is a good
indication that it doesn't have much users. Even the original commit
message refers to it more as a toy than as something of great use: "add
new fun module that automatically mutes your audio devices when you
leave with your bluetooth phone, and unmutes when you come back"
Removing it we completely remove the dependency on libbluetooth.
We need diferent symbol prefixing for the current BlueZ 4 support and
the new BlueZ 5 support which is about to enter the codebase, to avoid
symbol clashing and crashing the daemon in the case both modules are
loaded at the same time.
This commit replaces all pa_bluetooth_ and pa_bt_ (for consistency)
prefixes with pa_bluez4_, for both lower-case and upper-case, what was
done with the following sed commands:
$ sed -i s/pa_bluetooth_/pa_bluez4_/g src/modules/bluetooth/*bluez4*
$ sed -i s/PA_BLUETOOTH_/PA_BLUEZ4_/g src/modules/bluetooth/*bluez4*
$ sed -i s/pa_bt_/pa_bluez4_/g src/modules/bluetooth/*bluez4*
$ sed -i s/PA_BT_/PA_BLUEZ4_/g src/modules/bluetooth/*bluez4*
The current set of bluetooth modules only support up to BlueZ 4. Since
the BlueZ API when through a big change with the release of BlueZ 5 the
modules will be forked into a new set for BlueZ 5.
This commit also fixes the spelling of Bluetooth (it's a trademark which
should always be spelled with capital B) and the spelling of my name,
and also update the copyright note dates throughout the Bluetooth
modules.
This reverts commit 2247b18739.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
This reverts commit c4bd51a345.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
This reverts commit d9ed42c40f.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
This reverts commit d22ea7ff76.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
This reverts commit 61e8fd8854.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
This reverts commit cfb96b2530.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
This reverts commit 114edb0696.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
This reverts commit 235611a7d1.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
This reverts commit 2f79fb580a.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
This reverts commit 6fdf2b05b8.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
This reverts commit 9615def4b9.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
This reverts commit 0e4c16e120.
This is part of the reversion of BlueZ 5 support so it can be added back
in a separate set of modules. This makes the code easier to maintain and
decrease PulseAudio's binary size.
This patch fixes a small mistake where we actually log that we are
reverting to the auto resampler if we can't use the 'copy' resampler but
never do the revert.
This would lead to a crash if the user chooses the 'copy' resampler and
then tries to play something that needs to be resampled.
According to coding style, one should have one assertion per line
and not combine assertions.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
A recent feature addition added a dependency on X11, but this
dependency was not specified in Makefile.am, leading to linker
errors.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This patch updates the ax_pthread autoconf macro to the latest version
shipped with autoconf-archive: 2013.06.09.13
This also silences multiple warnings on autoconf 2.68+:
configure.ac:471: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
This updates the acx_libwrap.m4 macro for autoconf 2.68 and fixes
warnings like:
configure.ac:471: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
At the moment, port names combined from multiple devices are generated
based on the order that the devices are specified in config. This makes
programmatic use of thsee ports a bit painful, so let's make them be
combined in alphabetical order.
Add new PlaybackRate/CaptureRate values for UCM that can be used to
specify custom rates for devices. This value can either be set on the
verb, which makes it apply to all devices, or on the device to override
the verb setting.
This allows mappings to override some or all of the sample_spec used to
open the ALSA device. The intention, to start with, is to use this for
devices in UCM that need to be opened at a specific rate (like modem
devices). This can be extended to allow overrides in profile-sets as
well.
Since the hashmap stores a pointer to the key provided at pa_hashmap_put()
time, it make sense to allow the hashmap to be given ownership of the key and
have it free it at pa_hashmap_remove/free time.
To do this cleanly, we now provide the key and value free functions at hashmap
creation time with a pa_hashmap_new_full. With this, we do away with the free
function that was provided at remove/free time for freeing the value.
Make the PulseAudio tunnel behave the same way as a client
when it comes to figuring out how to connect to the current
PulseAudio daemon. This can be useful if you start a second
PulseAudio instance for e.g. network access.
