The bluetooth device should have ports so we can attach a latency to
the ports.
Every profile (a2dp, hsp...) has his own set of ports depending on the
number of sinks and sources it provides.
When a Bluetooth headset is connected only to HFP profile (not connected
to A2DP) and host streams to it, a crash occurs if host disconnects.
When HFP disconnects, audio thread will fail on POLLHUP then generate
a message to set PA profile to Off before ending.
If this message is managed before PA unload bluetooth device module,
all works fine.
But, if this message is managed during module unload, this finish by
re-entrance in release code (stop_thread) and a crash.
This fix prevents to process profile change when module is unloading.
Allow module-bluetooth-device to listens to HandsfreeGateway state
changes using DBUS signals. When an handsfree connects, module-bluetooth-device
is loaded and goes to playing state. When the handsfree disconnect audio,
the card profile is set to "off". If the headset connects audio again after
that, the card profile should switch to "hfgw" again to match state of audio
connection.
If card profile is set to "off", the audio stream should be released.
Current implementation releases the stream when the card profile
is changed to "hsp" or "hfgw" again and immediatly reconnects after that.
This happens in the following scenario :
An HandsfreeGateway connects RFCOMM and then SCO. A card appears in
PA and can be used. If for some reason, SCO is disconnected,
module-bluetooth-device is unloaded. The card will disappear, even
if RFCOMM is still connected. After that, it is not possible to
connect SCO again from PA.
This patch will add the necessary quirks so that pulseaudio can register
an endpoint on the /MediaEndpoint/HFPHS path. This endpoint is to be
used for HFP Handsfree profile.
Some sink flags are really just a product of what callbacks
are set on the device. We still enforce a degree of sanity
that the flags match the callbacks set, but we also set the
flags automatically in our callback setter functions to
help ensure that a) people use them and b) flags & callbacks
are kept in sync.
This is not currently useful but future commits will make further
changes concerning automatic setting of flags and event delivery
that makes this structure necessary.
This piggy backs onto the previous changes for protocol 22 and
thus does not bump the version. This and the previous commits should be
seen as mostly atomic. Apologies for any bisecting issues this causes
(although I would expect these to be minimal)
When using transport configured via Media API sample spec needs to be
updated since codec configuration may affect it when e.g. headset
configure a different frequency or number of channels from default.
When volume changes in bluetooth device PulseAudio volume is rounded
one too low, so if bluetooth headset changes volume and that volume
is immediately set again for bluetooth device, bluetooth step drifts
lower all the time. Volume is incremented by one in the conversion so
that we get right bluetooth step when re-applying volume.
Signed-off-by: Juho Hämäläinen <ext-juho.hamalainen@nokia.com>
Previously the userdata for the volume callbacks was saved to
pa_core.shared only once when loading module-bluetooth-device, and only when
the SCO over PCM feature was used. That breaks volume handling in cases where
the HSP profile is used without the SCO over PCM setup. Now the userdata is
set always when a sink or source is created, and removed when a sink or source
is removed.
The current implementation is totally bogus, it cast the over_sink
userdata to the bluetooth-device userdata... It was failing nicely
because the previous code had a gentle safe-guard in u->profile ==
PROFILE_HSP, and u->profile was just random.
There is no easy way to associate additional data to a sink or
source. Two solutions seems possible: looking up loaded modules and
check which one was handling the sink/source, or using pa_shared. I
went for the second solution.
This pulls a2dp-codecs.h from BlueZ which contains the capabilities
structures for SBC and MPEG. We currently have these manually added to
ipc.h, so pulling this header makes our files identical to upstream.
Mostly warnings about unused stuff.
Furthermore, the first hunk is a fix for the change in 177948a6.
Finally, comment in AEC_dtd was translated and the code simplified slightly.
CC module_bluetooth_device_la-module-bluetooth-device.lo
modules/bluetooth/module-bluetooth-device.c: In function ‘a2dp_process_render’:
modules/bluetooth/module-bluetooth-device.c:1335:30: warning: pointer targets in passing argument 6 of ‘sbc_encode’
differ in signedness [-Wpointer-sign]
../src/modules/bluetooth/sbc/sbc.h:92:9: note: expected ‘ssize_t *’ but argument is of type ‘size_t *’
CC module_rygel_media_server_la-module-rygel-media-server.lo
modules/module-rygel-media-server.c:383:13: warning: ‘append_property_dict_entry_object_array’ defined but not used [-Wunused-function]
CC module_echo_cancel_la-adrian-aec.lo
modules/echo-cancel/adrian-aec.h:360:15: warning: ‘AEC_getambient’ defined but not used [-Wunused-function]
modules/echo-cancel/adrian-aec.h:368:14: warning: ‘AEC_setgain’ defined but not used [-Wunused-function]
modules/echo-cancel/adrian-aec.h:374:14: warning: ‘AEC_setaes’ defined but not used [-Wunused-function]
modules/echo-cancel/adrian-aec.h:377:16: warning: ‘AEC_max_dotp_xf_xf’ declared ‘static’ but never defined [-Wunused-function]
CC module_echo_cancel_la-module-echo-cancel.lo
modules/echo-cancel/module-echo-cancel.c: In function ‘time_callback’:
modules/echo-cancel/module-echo-cancel.c:266:12: warning: variable ‘fs’ set but not used [-Wunused-but-set-variable]
CC module-virtual-sink.lo
modules/module-virtual-sink.c: In function ‘sink_input_pop_cb’:
modules/module-virtual-sink.c:206:15: warning: variable ‘current_latency’ set but not used [-Wunused-but-set-variable]
NREC stands for Noise Reduction and Echo Cancelation, it can be changed
at any point by the headset.
When set to "1" indicates that those algorithms shall be enabled by
default and "0" means the headset probably have them active so they
should be disabled in PA side.
Use minimum bitpool configured to get the maximum block_size possible,
also remove checks for how much has been written when decoding sbc frames
since the block size may change due to bitpool changes.
When audio skips it could be that there is some bandwidth limitation in
the link e.g. headset doesn't support EDR (< 2.0), and by reducing
the bitpool it may find a better rate that either prevent the skips
completely or at least reduce them.
Acquire now return input and output MTU of the file descriptor so it is
no longer necessary to get those after acquiring the fd, which less round
trips and faster response time when switching profiles.
Instead <pulsecore/poll.h> should be included. That file includes poll.h on
platform where it is appropriate. Also remove some unnecessary <ioctl.h>
includes.
Create the 'Handsfree Gateway' profile for bluetooth cards and add
filters for 'org.bluez.HandsfreeGateway' to the discover module so
module-bluetooth-device is loaded with the correct profile when a
Handsfree Gateway connects to bluetoothd (in this case bluetoothd
is acting as the headset).
- drop the 'virtual_' prefix from s->virtual_volume since we don't
distuingish between reference and real volumes for sources
- introduce an accuracy for source volumes: if the hardware can control
the volume "close enough" don't necessarily adjust the rest in
software unless it is beyond a certain threshold. This should save a
little bit of CPU at the expensive of a bit of accuracy in volume
handling.
- other minor cleanups
