Change default backend from 'auto' to 'native' so that in the usual
install pulseaudio uses the native backend with HFP_HF handling.
set default to false unless the backend is the native one, in which
case the default becomes true.
Additionally set default value of enable_native_hfp_hf to false unless
the backend is the native one, in which case the default becomes
true. so that we only bind the HFP_HF end point in the native case
(leaving it free for ofono in the ofono backend or auto case)
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/491>
When all headsets supported both HSP and HFP, life was good and we
only needed to implement HSP in the native backend. Unfortunately
some headsets have started supporting HFP only. Unfortuantely, we
can't simply switch to HFP only because that might break older HSP
only headsets meaning we need to support both HSP and HFP separately.
This patch separates them from a joint profile to being two separate
ones. The older one retains the headset_head_unit name, meaning any
saved parameters will still select this (keeping us backward
compatible). It also introduces a new headset_handsfree.
For headsets that support both HSP and HFP, the two profiles will
become separately visible and selectable. This will only matter once
we start adding features to HFP that HSP can't support (like wideband
audio).
Signed-off-by: <James.Bottomley@HansenPartnership.com>
---
v6:
- merge profile switching fixes patch from Rodrigo Araujo
v5:
- rename option to enable_native_hfp_hf
- don't call profile_done for HFP_HF unless it was initialised
v3:
- Update for PA 11.0
v2:
- fold in review feedback
- add global disable option for not registering HFP
v3:
- change parameter to enable_profile_hfp
- update device_supports_profile to be aware of hfp/hsp exclusivity
- change parameter to enable_profile_hfp_hf
bluetooth: separate HSP and HFP (to me merged with this patch)
Hi.
First, just to say that your patches are going great. Finally I can use
the microphone of my HFP only headset (a version of a Bluedio T2+).
So far, I've only encontered one problem: the auto_switch option of
module_bluetooth_policy stops working. Dug through the code and I think
you missed a few spots were you have to hangle the new headset_handsfree
profile in module_bluetooth_policy.c
Applying the following after applying your v5 patches fixed the issue
for me, now when I start making a VOIP call the profile switches to
headset_handsfree and the mic works automatically, and when the call
finishes it reverts back to a2dp.
Thanks and best regards.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/491>
This uses the messaging API to initiate a codec switch.
While a particular codec might be applicable only for a particular
profile, for eg. aptX can only be applicable for A2DP sink or source
and not for let's say HSP, the codec switching logic has not been
tied to the logic for switching profiles.
Codec can be switched by running the following on the command line.
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec{"ldac_hq"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"ldac_mq"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"ldac_sq"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"aptx_hd"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"aptx"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"sbc"}
Codec name passed above is matched against pa_a2dp_codec->name. Note that
the match is case sensitive. XX_XX_XX_XX_XX_XX needs to be substituted with
the actual bluetooth device id.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/440>
Hashmap loaded_device_paths contain objects holding keys to entries, and
these objects must be alive while map is emptied.
Reorder freeing this hashmap before destroying device objects to fix
crash on exit.
This removes the symdef header generation m4 magic in favour of a
simpler macro method, allowing us to skip one unnecessary build step
while moving to meson, and removing an 11 year old todo!
This breaks a lot of headsets, so disabling by default. Can be
re-enabled in configuration for specific hardware where it is deemed
necessary.
Also added some debug logging to be able to examine what MTU size is
reported by the device.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=102660
Some modules may only be loaded once, and trying to load them
twice from default.pa makes PulseAudio startup fail. While that could
be considered a user error, it's nicer to not be so strict. It's not
necessarily easy to figure what went wrong, if for example the user
plays with RAOP and adds module-raop-discover to default.pa, which first
works fine, but suddenly stops working when the user at some point
enables RAOP support in paprefs. Enabling RAOP in paprefs makes
module-gconf load the module too, so the module gets loaded twice.
This patch adds a way to differentiate module load errors, and
make cli-command ignore the error when the module is already
loaded.
A recent patch changed the MTU size from the default value of 48 to the value
returned by getsockopt(). This breaks HSP for some setups. To circumvent the
problem, this patch introduces a boolean parameter "autodetect_mtu" for
module-bluetooth-discover, module-bluez5-discover and module-bluez5-device to
make this use of getsockopt() configurable.
If 'pa_modargs_new' returns a NULL, we need to be careful to not call
'pa_modargs_free' in the failure path since it requires that we pass it
a non-null argument. Also updates 'module-bluetooth-policy.c:pa__init'
to follow the standard "goto fail" pattern used everywhere else.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
FSF addresses used in PA sources are no longer valid and rpmlint
generates numerous warnings during packaging because of this.
This patch changes all FSF addresses to FSF web page according to
the GPL how-to: https://www.gnu.org/licenses/gpl-howto.en.html
Done automatically by sed-ing through sources.
This patch adds a module argument "headset=ofono|native|auto" to
module-bluetooth-discover and module-bluez5-discover.
To make Arun's happy, the default is 'native' if compiled in, otherwise
'ofono'. 'Auto' will try to autoswitch depending on whether ofono is
running or not.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
For quite some time now the device driver module doesn't work well
without the discovery module, so for the BlueZ 5 support we'll prevent
the device driver module to be loaded if the discovery module is not
loaded.
pa_bluetooth_discovery is the struct that holds information about known
Bluetooth audio devices and other information about the Bluetooth stack.
This commit also creates bluez5-util.[ch], which will hold a lot of
utility functions to help with the BlueZ 5 support.
