For mSBC to work correctly the following must be set correctly
- codec object
- transport write method
- transport setsockopt method
Use helper method to set all three simultaneously.
Static configuration structure may be cleaner solution.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/507>
Generalize the distinction between local and peer-attenuated volumes
into a function, paving the way for future changes where this needs to
be checked in more places and when A2DP Absolute Volume support is
added.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/521>
Native backend implements HFP AG but not HFP HF yet, therefore headset=auto
functionality is still needed if HFP HF is required.
To make headset=auto work again, drop both HFP AG and HSP AG roles while
performing handover from native backend when oFono is detected running.
While at it, restore profile description to Headset Head Unit (HSP/HFP)
to note that HFP may be still provided via oFono backend.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/491>
HFP 1.6 requires a stateful negotiation of AT commands. The prior
version got away with initialising HFP simply by replying 'OK' to
every negotiation attempt. This one actually tries to parse the state
and make sure the negotiation occurs correctly
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
v4:
- Update for PA 11.0
- Finally sort out CIND negotiaton for complex headsets
v3:
- remove internal debugging
- added comment for t->config being not null for hfp
- removed unused returns from hfp_rfcomm_handle()
- remove rfcomm comment
- use pa_startswith
- simplify negotiation
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/491>
When all headsets supported both HSP and HFP, life was good and we
only needed to implement HSP in the native backend. Unfortunately
some headsets have started supporting HFP only. Unfortuantely, we
can't simply switch to HFP only because that might break older HSP
only headsets meaning we need to support both HSP and HFP separately.
This patch separates them from a joint profile to being two separate
ones. The older one retains the headset_head_unit name, meaning any
saved parameters will still select this (keeping us backward
compatible). It also introduces a new headset_handsfree.
For headsets that support both HSP and HFP, the two profiles will
become separately visible and selectable. This will only matter once
we start adding features to HFP that HSP can't support (like wideband
audio).
Signed-off-by: <James.Bottomley@HansenPartnership.com>
---
v6:
- merge profile switching fixes patch from Rodrigo Araujo
v5:
- rename option to enable_native_hfp_hf
- don't call profile_done for HFP_HF unless it was initialised
v3:
- Update for PA 11.0
v2:
- fold in review feedback
- add global disable option for not registering HFP
v3:
- change parameter to enable_profile_hfp
- update device_supports_profile to be aware of hfp/hsp exclusivity
- change parameter to enable_profile_hfp_hf
bluetooth: separate HSP and HFP (to me merged with this patch)
Hi.
First, just to say that your patches are going great. Finally I can use
the microphone of my HFP only headset (a version of a Bluedio T2+).
So far, I've only encontered one problem: the auto_switch option of
module_bluetooth_policy stops working. Dug through the code and I think
you missed a few spots were you have to hangle the new headset_handsfree
profile in module_bluetooth_policy.c
Applying the following after applying your v5 patches fixed the issue
for me, now when I start making a VOIP call the profile switches to
headset_handsfree and the mic works automatically, and when the call
finishes it reverts back to a2dp.
Thanks and best regards.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/491>
The PA_BLUETOOTH_PROFILE names should mirror the PA_BLUETOOTH_UUID
names using profile_function instead of randomly made up names. Fix
this with the transformation:
PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT -> PA_BLUETOOTH_PROFILE_HSP_HS
PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY -> PA_BLUETOOTH_PROFILE_HFP_AG
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
v4: update for PA 11.0
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/491>
Similar to the situation/comment in `endpoint_release` BlueZ does not
request any reply to `ClearConfiguration()` either; sending one results
in the same "0 matched rules" warning from dbus-daemon:
dbus-daemon[1309]: [system] Rejected send message, 0 matched rules; type="method_return", sender=":1.71" (uid=1000 pid=87548 comm="../build/src/daemon/pulseaudio -vvvv -n -F ../buil") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.3" (uid=0 pid=1308 comm="/usr/lib/bluetooth/bluetoothd -d ")
Solve this by only creating a return message when an (othwise empty)
reply is solicited for, just like in `endpoint_release`.
Unfortunately we also have to make sure to not send any error back if no
reply is requested, but fortunately an argument parsing error here is
extremely unlikely.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/472>
As we now support codecs other than SBC, we might have codec which does
not have an encode or a decode capability. Specifically, in the case of
LDAC there isn't a known decoder implementation available. For such a
case, we should not register the corresponding endpoint.
In case of LDAC, as decoding cannot be supported, we should not register
a sink endpoint or vice versa in the other scenario.
To do this, we check if encode_buffer or decode_buffer entry for a codec
has been set in pa_a2dp_codec and accordingly prevent or allow it's
registration.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/440>
When it comes to codecs provided via GStreamer, we register all codecs
if GStreamer option is enabled for bluez5 via meson. However, the
GStreamer plugin required for the codec might not be present on the
system. This results in the codec being available for registration with
the bluez stack or selection by the user, but, trying to use the said
codec then fails.
To prevent the above, we now use the can_be_supported codec API to check
if the codec is usable and if not, we do not register the said codec and
also prevent users from switching to it.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/440>
This API internally checks if a requested codec can be supported on the
system. This is especially required for codecs supported via GStreamer
where the availability of a plugin decides if the said codec can be
supported.
This will be used to prevent registration of a codec which the remote
endpoint device might be able to support, but, PulseAudio can't as the
codec is not available on the system due to the absence of a plugin.
We can also prevent listing or switching to an unavailable codec.
Note that the codec negotiation happens with the bluez stack even before
a device is connected. Because of this, we need to make sure that gst_init
is called before checking for the availability of a plugin. Since
module-bluez5-device gets loaded only after a connection to the device
has been established, doing the gst_init in that or one of the bluetooth
modules is not feasible.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/440>
This uses the messaging API to initiate a codec switch.
While a particular codec might be applicable only for a particular
profile, for eg. aptX can only be applicable for A2DP sink or source
and not for let's say HSP, the codec switching logic has not been
tied to the logic for switching profiles.
Codec can be switched by running the following on the command line.
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec{"ldac_hq"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"ldac_mq"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"ldac_sq"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"aptx_hd"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"aptx"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"sbc"}
Codec name passed above is matched against pa_a2dp_codec->name. Note that
the match is case sensitive. XX_XX_XX_XX_XX_XX needs to be substituted with
the actual bluetooth device id.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/440>
Support for multiple codecs needs to use a new Bluez API which pulseaudio
does not implement yet.
So register explicitly only SBC codec which is provided by pulseaudio A2DP
codec API.
This crash occurs when PA is connected to a phone through the oFono
backend.
When disabling the Bluetooth adapter, pa_bluetooth_device is removed before
hf_audio_card. Both keep refs on pa_bluetooth_transport. Those removal will
call pa_bluetooth_transport_free() from device_free() (bluez5-util.c) and
hf_audio_card_free() (backend-ofono.c).
In the end, the call to pa_bluetooth_transport_free() calls
pa_hasmap_remove() through pa_bluetooth_transport_unlink(), but since
memory has already been freed, the second try results in a segfault.
Triggering hf_audio_card removal during pa_bluetooth_device removal allows
hf_audio_card to be freed at the right time.
This patch introduce new modular API for bluetooth A2DP codecs. Its
benefits are:
* bluez5-util and module-bluez5-device does not contain any codec specific
code, they are codec independent.
* For adding new A2DP codec it is needed just to adjust one table in
a2dp-codec-util.c file. All codec specific functions are in separate
codec file.
* Support for backchannel (microphone voice). Some A2DP codecs (like
FastStream or aptX Low Latency) are bi-directional and can be used for
both music playback and audio call.
* Support for more configurations per codec. This allows to implement low
quality mode of some codec together with high quality.
Current SBC codec implementation was moved from bluez5-util and
module-bluez5-device to its own file and converted to this new A2DP API.
It was reported that PulseAudio causes error messages in syslog from
dbus-daemon:
Jan 14 04:51:32 gentoo dbus-daemon[2492]: [system] Rejected send message, 2 matched rules; type="error", sender=":1.15" (uid=1000 pid=2864 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.1" (uid=0 pid=2670 comm="/usr/libexec/bluetooth/bluetoothd ")
The default policy on the system bus is to not let any method call
replies through if they have not been requested, and apparently
bluetoothd doesn't want replies to the Release() call.
This also changes the reply type from error to normal reply. The "not
implemented" error didn't make sense to me. We don't do any cleanup in
the Release() handler, probably because there's nothing to do. If there
is some cleanup that we should do, then it's a serious bug not to do it.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=104646
Use pa_assert_se() to check return value (pro forma) like everywhere else
Coverity ID: #154313
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
There are actually two HSP HS UUIDs. My theory is that the second one
was added, because someone was not happy with the old UUID being used
for identifying two different things (the HSP profile as a whole, and
the HS role within the HSP profile). Some headsets only use the new
UUID, and those headsets won't work if we don't recognize the new UUID.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=93898
If a HFP audio gateway was connected via the ofono backend, pulse would
segfault during shutdown of the daemon. pa_bluetooth_discovery_unref()
removed the devices and transports before the ofono backend was freed.
Because the ofono backend keeps its own list of transports, transport_free()
was then called during termination of the ofono backend with an invalid
transport. Bug reported by Andrew Hlynskyi.
This patch moves the termination of the ofono and native backends before
freeing the devices.
The function can only fail if there's not enough memory available, and
if that happens, the convention in PulseAudio is to abort.
CID: 1353106, 1353108, 1353140
There were two bugs in the old logic. The first one:
If a device has two profiles, the old code would start the wait timer
when the first profile connects, but when the second profile connects,
the timer would not get stopped and the CONNECTION_CHANGED hook would
not get fired, because the code for that was inside an if block that
only gets executed when the first profile connects. As a result,
module-bluez5-device loading would always be delayed until the wait
timeout expires.
The second bug:
A crash was observed in device_start_waiting_for_profiles(). That
function is called whenever the connected profile count changes from 0
to 1. The function also has an assertion that checks that the timer is
not running when the function is called. That assertion crashed in the
following scenario with a headset that supports HSP and A2DP:
1. First HSP gets connected. The timer is started.
2. Then HSP gets disconnected for some reason. The timer is still
running.
3. Then A2DP gets connected. device_start_waiting_for_profiles() is
called, because the connected profile count changed from 0 to 1 again.
The timer is already running, so the assertion fails.
First I thought I'd remove the assertion from
device_start_waiting_for_profiles() and just restart the timer on the
second call, but then I figured that when the device returns to the
"everything disconnected" state in step 2, it would be better to stop
the timer. The purpose of the timer is to delay the notification of the
device becoming connected, but if the device becomes disconnected during
the waiting period, the notification doesn't make sense any more, and
therefore the timer doesn't make sense either.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=100237
With headset=auto it is possible that AG devices are connected and handled
via the native backend when ofono is started. Because the HS role will then
be disabled in the native backend, AG devices must be disconnected and any
future connections will be handled by ofono.
This patch changes the behavior of the headset=auto switch for module-bluez5-discover.
With headset=auto now both backends will be active at the same time for the AG role and
the switching between the backends is only done for the HS role.
headset=ofono and headset=native remain unchanged.
This allows to use old HSP only headsets while running ofono and to have headset support
via pulseaudio if ofono is started with the --noplugin=hfp_ag_bluez5 option.
Add transport_set_state() that encapsulates changing the variable,
logging and firing the change hook.
I also made a cosmetic change to the corresponding BlueZ 5 log
message so that both messages have the format that I like.
A hashmap is more convenient than a linked list for storing the UUIDs,
so change the BlueZ 4 code accordingly.
Rename the BlueZ 4 UUID constants to match the BlueZ 5 naming.
The only changes to the BlueZ 5 code are the addition of one comment
and making another comment a bit clearer.
The properties_received flag affects whether the device should be
considered valid, so let's update the valid flag after setting the
properties_received flag.
There's a call to device_update_valid() anyway later when setting
the device adapters, so this change isn't strictly necessary, but
this makes it more obvious that the code is correct (and less
fragile).
The CONNECTION_CHANGED hook is used to notify the discovery module
about new and removed devices. When a bluetooth device connects, the
hook used to be called immediately when the first profile connected.
That meant that only one profile was marked as available during the
card creation, other profiles would get marked as available later.
That makes it hard for module-card-restore to restore the saved
profile, if the saved profile becomes available with some delay.
module-card-restore has a workaround for this problem, but that turned
out to interfere with module-bluetooth-policy, so the workaround will
be removed in the next patch.
The BlueZ 4 code doesn't need changes, because we use the
org.bluez.Audio interface to get a notification when all profiles are
connected.
FSF addresses used in PA sources are no longer valid and rpmlint
generates numerous warnings during packaging because of this.
This patch changes all FSF addresses to FSF web page according to
the GPL how-to: https://www.gnu.org/licenses/gpl-howto.en.html
Done automatically by sed-ing through sources.
Because the adapters reference the devices hashmap on free, we mush
free the adapters hashmap first and then the devices hashmap.
Reported-by: Alexander Patrakov <patrakov@gmail.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This patch adds a module argument "headset=ofono|native|auto" to
module-bluetooth-discover and module-bluez5-discover.
To make Arun's happy, the default is 'native' if compiled in, otherwise
'ofono'. 'Auto' will try to autoswitch depending on whether ofono is
running or not.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This implements some autodetect if both headset backends are compiled in:
First we try to contact the oFono service, if that's not working,
then we start the native backend instead.
Likewise if the oFono service is going offline/online, we load/unload
the native backend accordingly.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Enable both ofono and native backends to be built into the same
libbluez5-util. Never build the null backend.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
