This patch adds a module argument "headset=ofono|native|auto" to
module-bluetooth-discover and module-bluez5-discover.
To make Arun's happy, the default is 'native' if compiled in, otherwise
'ofono'. 'Auto' will try to autoswitch depending on whether ofono is
running or not.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This implements some autodetect if both headset backends are compiled in:
First we try to contact the oFono service, if that's not working,
then we start the native backend instead.
Likewise if the oFono service is going offline/online, we load/unload
the native backend accordingly.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Enable both ofono and native backends to be built into the same
libbluez5-util. Never build the null backend.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Commit fa092af59c removed an argument to pa_rtpoll_run, but
forgot to remove that argument for all callers to pa_rtpoll_run.
This commit removes the remaining ones.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
frames_per_block is the mempool's maximum block size in frames
v2 (thanks David Henningson)
* rename max_frames to frames_per_block
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
These two control names are currently being added to the HDA driver,
so let's support them in PulseAudio as well.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The analog-output path should be suppressed when there are more
specific paths available. Currently that usually doesn't happen. The
suppression can be done with the path subset detection, and this patch
makes that work (another approach would be to mark the elements as
required-absent, like analog-input does, but I like the subset
suppression more, because it requires less stuff in the configuration
files). The problem with listing the now-removed elements in
analog-output.conf was that if the sound card had e.g. a Speaker
element, then the switch behaviour was different between analog-output
and analog-output-speakers, so analog-output was not considered a
subset of analog-output-speakers.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=74609
We weren't writing out one character from the "OK" response, and the
"AT" part of the "+VGS" and "+VGM" commands was missing. Also, the spec
says that the command is terminated by only a CR and not an LF (probably
doesn't hurt, but let's adhere to the spec for now).
Parse the gain changed AT commands from the headset and fire 2 new
hooks as a result. The device will connect to those hooks and change the
source/sink volumes.
When the source/sink volume changes, set the gain on the microphone or
speaker respectively. Make sure we do nothing if the transport can not
handle the gain changes.
Add a simple native headset backend that implements support for the
blutooth HSP profile.
This allows pulseaudio to output audio to a Headset using the HSP profile.
Make the native backend the default.
There is no use in trying to load data in legacy format, if we
already know that there is no data at all.
Also clarify in the debug message whether there is invalid data
or no data at all.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This fixes a bug in latency configuration. The wrong type in the cast
caused UINT64_MAX being not treated as special, so the configured
latency was set to UINT64_MAX usecs, which of course is absurdly huge
latency.
This should not have any effect on behaviour. The goal is to align
with the pattern that I think we should follow:
Object initialization:
- put() is the place to create references from other objects to the
newly created object. In this case, adding the transport to
discovery->transports was moved from new() to put, and adding the
transport to device->transports was moved from set_state() to
put().
Object destruction:
- unlink() undoes put() and removes all references from other objects
to the object being unlinked. In this case setting the
device->transports pointer to NULL was moved from set_state() to
unlink(), and setting the discovery->transports pointer to NULL was
moved from free() to unlink().
- free() undoes new(), but also calls unlink() so that object owners
don't need to remember to call unlink() before free().
The default maximum latency is 10 seconds, which is not good,
especially since the tunnel sink doesn't support rewinding. Due to the
lack of rewinding, e.g. volume changes take a long time with large
latencies.
It seems at some point the code migrated to use the entry_write calls,
but fill_db is still using the old syntax, causing the entry to be
invalid.
The crash happens when clean_up_db gets called, which then calls
entry_read, causing the crash.
Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
If the keyboard is unplugged, it looks like the kernel is reporting
back -ENODEV when trying to close the fd. This is probably a kernel
error, but still, it's better to complain than to crash.
Buglink: https://bugs.freedesktop.org/show_bug.cgi?id=80867
Reported-by: Stelios Bounanos
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
It is possible that the chosen active_port doesn't equal
new_data->active_port, using p->name is more accurate.
Please refer to sink_new_hook_callback()
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Now a2dp and hsp sinks and sources will have different names which means that
applications and other modules can use sink/source to distinguish selected
profile.
Module module-device-restore uses sink/source name and port name as identifier,
so if different profiles have different names module-device-restore can store
volume settings for each profile.
So with this patch it is possible to configure different volume settings for
a2dp and hsp profiles.
This patch does not change port names so gnome applications will be happy.
Note that similar patch is needed also for bluez5, but I'm not using bluez5
so I cannot write or test it.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
On a machine without fixed connecting audio devices like internal
microphone or internal speaker, and when there is no external audio
devices plugging in, the default source/sink is alsa_input/alsa_output
and there is no input devices/output devices listed in the gnome
sound-setting.
Under this situation, if we connect a bluetooth headset, the gnome
sound-setting will list bluez input/output devices, but they are not
active devices by default. This looks very weird that sound-setting
lists only one input device and one output device, but they are not
active. To change this situation, we add an argument, the policy is
if a new source/sink is connected and current default source/sink's
active_port is AVAILABLE_NO, we let the new added one switch to
default one.
BugLink: http://bugs.launchpad.net/bugs/1369476
Signed-off-by: Hui Wang <hui.wang@canonical.com>
This allow 'off' profile to be choosen when no other profile is available
which is considered better since it requires less resources than other
profiles.
Now that we have switched to using the mixer handle only,
there is no use for sending hctl handles around.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Use the new mixer API to get callbacks, instead of using the hctl
API. Using the hctl API caused a memory leak, because alsa-lib itself
used the hctl callbacks, which we were previously overriding.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Instead of using the hctl interface, we can find controls belonging
to other iface types than "mixer". We do this by introducing a new
mixer class "SND_MIXER_ELEM_PULSEAUDIO" and create snd_mixer_elem's
for all PCM and CARD iface types (as Jacks are of the CARD type and
ELD controls are of the PCM type).
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Register as a HandsfreeAudioAgent with oFono during backend
initialization and unregiter during backend finalization. This commit
also adds a check when receiving method calls or signals to make sure
the sender matches with the D-Bus service we're registered with.
