This allows us to support the PlaybackVolume and CaptureVolume commands
in UCM, specifying a mixer control to use for hardware volume control.
This only works with ports corresponding to single devices at the
moment, and doesn't support stacking controls for combination ports.
The configuration is intended to provide a control (like Headphone
Playback Volume), but we try to resolve to a simple mixer control
(Headphone) to reuse existing volume paths.
On the UCM side, this also requires that when disabling the device for
the port, the volume should be reset to some default.
When enabling/disabling combination devices, things are a bit iffy since
we have no way to reset the volume before switching to a combination
device. It would be nice to have a combination-transition-sequence
command in UCM to handle this and other similar cases.
PlaybackSwitch and CaptureSwitch are yet to be implemented.
The previous commit introduces logic in module-switch-on-port-available
that may change a card's active profile when its availability changes to
PA_AVAILABLE_NO. To choose the new active profile, it needs a consistent
view of the new availability of all profiles, so this commit changes the
order which the ALSA driver updates all profiles' availability to ensure
the active profile is last.
This is not generic enough to cover cases were we may want to take an
action on availability changes of profiles other than the active one
that also need a consistent view of all profiles' availability. But we
don't have any callbacks implementing such action at the moment.
Previously, the "avoid-resampling" option of daemon.conf is to make the
daemon try to use the stream sample rate if possible for all sinks or
sources.
This patch applies this option to module-udev-detect and module-alsa-card
as a module argument in order to override the default value of daemon.conf.
As a result, user can use this argument for more fine-grained control.
e.g.) set it false in daemon.conf and set it true for module-udev-detect
or a particular module-alsa-card in default.pa.(or vice versa)
To set it, use "avoid_resampling=true or false" as the module argument.
Signed-off-by: Sangchul Lee <sc11.lee@samsung.com>
When a new card shows up (during pulseaudio startup or hotplugged),
pulseaudio needs to pick the initial profile for the card. Unavailable
profiles shouldn't be picked, but module-alsa-card sometimes marked
unavailable profiles as available, causing bad initial profile choices.
This patch changes module-alsa-card so that it marks all profiles
unavailable whose all output ports or all input ports are unavailable.
Previously only those profiles were marked as unavailable whose all
ports were unavailable. For example, if a profile contains one sink and
one source, and the sink is unavailable and the source is available,
previously such profile was marked as available, but now it's marked as
unavailable.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=102902
jack->melem can be null if the jack disappears between probing the card
and the init_jacks() call. I don't know if jacks actually ever disappear
like that (seems unlikely), but this check is in any case needed as long
as init_jacks() has proper handling for the jack disappearing case
(rather than just an assert).
There was a crash report[1] that indicated that card_suspend_changed()
called report_jack_state() with a null melem. I don't know if that was
because the jack actually disappeared, or is there some other bug too.
[1] https://bugs.freedesktop.org/show_bug.cgi?id=104385
The Intel HDMI LPE driver works in a peculiar way when the HDMI cable is
not plugged in: any written audio is immediately discarded and underrun
is reported. That resulted in an infinite loop, because PulseAudio tried
to keep the buffer filled, which was futile since the written audio was
immediately consumed/discarded.
This patch adds special handling for the LPE driver: if the active port
of the sink is unavailable, the sink suspends itself. A new suspend
cause is added: PA_SUSPEND_UNAVAILABLE.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=100488
This removes the symdef header generation m4 magic in favour of a
simpler macro method, allowing us to skip one unnecessary build step
while moving to meson, and removing an 11 year old todo!
The alsa card hasn't so far set any availability for profiles. That
caused an issue with some HDMI hardware: the sound card has two HDMI
outputs, but only the second of them is actually usable. The
unavailable port is marked as unavailable and the available port is
marked as available, but this information isn't propagated to the
profile availability. Without profile availability information, the
initial profile policy picks the unavailable one, since it has a
higher priority value.
This patch adds simple logic for marking some profiles unavailable:
if the profile only contains unavailable ports, the profile is
unavailable too. This can be improved in the future so that if a
profile contains sinks or sources that only contain unavailable ports,
the profile should be marked as unavailable. Implementing that
requires adding more information about the sinks and sources to
pa_card_profile, however.
BugLink: https://bugzilla.yoctoproject.org/show_bug.cgi?id=8448
I want module-alsa-card to set the availability of unavailable
profiles before the initial card profile gets selected, so that the
selection logic can use correct availability information.
module-alsa-card initializes the jack state after calling
pa_card_new(), however, and the profile selection happens in
pa_card_new(). This patch solves that by moving parts of pa_card_new()
to pa_card_choose_initial_profile() and pa_card_put().
pa_card_choose_initial_profile() applies the profile selection policy,
so module-alsa-card can first call pa_card_new(), then initialize the
jack state, and then call pa_card_choose_initial_profile(). After that
module-alsa-card can still override the profile selection policy, in
case module-alsa-card was loaded with the "profile" argument. Finally,
pa_card_put() finalizes the card creation.
An alternative solution would have been to move the jack
initialization to happen before pa_card_new() and use pa_card_new_data
instead of pa_card in the jack initialization code, but I disliked
that idea (I want to get rid of the "new data" pattern eventually).
The order in which the initial profile policy is applied is reversed
in this patch. Previously the first one to set it won, now the last
one to set it wins. I think this is better, because if you have N
parties that want to set the profile, we avoid checking N times
whether someone else has already set the profile.
If a card has been hot-plugged after pulseaudio start, alsa-lib still has
old configuration in memory, which doesn't have PCM definitions for the
new card. Thus, this error appears, and the device doesn't work:
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.front.0:CARD=0'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM front:0
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
The snd_config_update_free_global() function makes alsa-lib forget any
cached configuration and reparse all PCM definitions from scratch next
time it is told to open anything.
The trick has been copied from Phonon.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=54029
Signed-off-by: Alexander E. Patrakov <patrakov@gmail.com>
This is needed so we don't keep stale jack availability information
while the card is suspended.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=93259
Signed-off-by: Arun Raghavan <arun@arunraghavan.net>
In case the same jack causes one port to become available and another
one unavailable, the available should be reported first.
This is to avoid unnecessary changes: e g, consider a 'Headphone Jack'
making 'Headphone' available and 'Speaker' unavailable. In case the
unavailable change triggers first, and there is also a currently available
third port (e g 'Digital out'), the routing system might choose to route
to this port because neither of the 'Speaker' and 'Headphone' ports are
available.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Previously module-alsa-card assigned to pa_alsa_jack.plugged_in
directly, and then did the port availability updating manually. The
idea of pa_alsa_jack_set_plugged_in() is to move the availability
updating to the mixer infrastructure, where it really belongs.
Similarly, pa_alsa_jack.has_control was previously modified directly
from several places. The has_control field affects the port
availability, and pa_alsa_jack_set_has_control() takes care of
updating the availability.
For now, pa_alsa_jack_set_plugged_in() and
pa_alsa_jack_set_has_control() only update the port availability
when using UCM. My plan is to adapt the traditional mixer code later.
This fixes a crash that occurred when trying to access non-existent
port data. Doing this:
pa_alsa_port_data *data = PA_DEVICE_PORT_DATA(port);
is not a good idea when using UCM, because in the UCM mode ports don't
have any data, so the data pointer points to some random memory.
FSF addresses used in PA sources are no longer valid and rpmlint
generates numerous warnings during packaging because of this.
This patch changes all FSF addresses to FSF web page according to
the GPL how-to: https://www.gnu.org/licenses/gpl-howto.en.html
Done automatically by sed-ing through sources.
In case there are two independent jacks for one port (e.g. Dock
Headphone Jack and Headphone Jack), the availability ends up being
incorrect if the first one was _NO (not plugged) and the second gets
_YES (plugged). Also pulse complains about the state being inconsistent
which isn't true.
Fix this by preferring more precise states (yes/no) over unknown and yes
over others. However in case a plugged jack makes the port unavailable
let that overrule everything else.
Now that we have switched to using the mixer handle only,
there is no use for sending hctl handles around.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Use the new mixer API to get callbacks, instead of using the hctl
API. Using the hctl API caused a memory leak, because alsa-lib itself
used the hctl callbacks, which we were previously overriding.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
When given an explicit device.description in card_properties, prefer
this information over other default prefixes (e.g. 'Built-in Audio')
when constructing sink/source descriptions.
For example, if I manually configure the card description to be
"FooBar", I then expect that the sinks and created by the card also
have "FooBar" in their description instead of generic "Built-in
Audio".
The modargs are in both cases (a succesfull as well as a failed module
initialization) freed already in pa__done().
To avoid leaking modargs memory before they are assigned to u->modargs, the
code is reorganized to first allocate userdata, and then allocate the modargs.
Local variable ma is not needed anymore.
discussion here
http://lists.freedesktop.org/archives/pulseaudio-discuss/2013-December/019661.html
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Reported-by: poljar (Damir Jelić) <poljarinho@gmail.com>
According to coding style, one should have one assertion per line
and not combine assertions.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Since the hashmap stores a pointer to the key provided at pa_hashmap_put()
time, it make sense to allow the hashmap to be given ownership of the key and
have it free it at pa_hashmap_remove/free time.
To do this cleanly, we now provide the key and value free functions at hashmap
creation time with a pa_hashmap_new_full. With this, we do away with the free
function that was provided at remove/free time for freeing the value.
This patch replaces every occurrence of ')\n{' with ') {'.
Command used for this:
find . -type d \( -name ffmpeg \) -prune -o \
-regex '\(.*\.[hc]\|.*\.cc\)' \
-a -not -name core-util.c -a -not \
-name adrian-aec.c -a -not -name g711.c \
-exec sed -i -e '/)$/{N;s/)\n{$/) {/}' {} \;
The excluded files are mirrored files from external sources.
The hdmi_eld_changed callback is called by alsa-lib at shutdown.
In that case, just exit instead of trying to access something with
already closed handles.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This way port availability has been filled in when we create the
sink, which will later enable us to pick the right port directly.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Due to a misconfiguration on my side my hdmi card didn't load with
snd-hda-codec-hdmi but through the fallback mechanism. Pulseaudio
would crash during early because hctl_handle was null, so skip
init_eld_ctls when hctl_handle is null to prevent a crash.
Thanks to David Henningsson for helping me find the underlying issue.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
If there is a proper monitor name, we expose this as a device.product.name
property on the port. This can be useful for UIs who might want to show
this name.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Generalize the availability flag in order to be used beyond the scope of
ports.
However, pa_port_availability_t is left unchanged to avoid modifying the
protocol and the client API. This should be replaced by pa_available_t
after a validation phase of this new generic enum type.
The previous patch removed module-gconf's dependency on the userdata
pointer of the free callback, and that was the only place where the
userdata pointer of pa_free2_cb_t was used, so now there's no need for
pa_free2_cb_t in pa_hashmap_free(). Using pa_free_cb_t instead allows
removing a significant amount of repetitive code.
In UCM basic functions, we only assign intended roles from modifier
to sink/source, but we don't have a chance to set the ucm modifiers.
Here we amend the functions so that when roled stream starts or
stops, we have the following results:
1. stream will be routed to sink/source specified in modifier by
module-intended-roles
2. After that, modifier will be enabled or disabled.
3. when multiple streams with matched roles of modifier start, only
the first one will enable the modifier, and when they end, the
last one will disable the modifier.
Signed-off-by: Feng Wei <wei.feng@freescale.com>
Signed-off-by: Arun Raghavan <arun.raghavan@collabora.co.uk>
Jack in UCM is decided by UCM device name, although in fact
not all UCM devices have "jacks". Because port is also mapped
to UCM device, we can always find target port when some jack
event happens.
Signed-off-by: Feng Wei <wei.feng@freescale.com>
UCM basic functions will provide another way to handle the alsa mixer
and controls. That means alsa card module will make use of alsa ucm
configurations provided by various audio systems instead of mixer and
paths configurations provided by PA. PA profiles come from UCM verb, PA
sinks/sources and ports come from UCM devices.
In case the proper UCM configurations are found, ucm branches are
activated, or we will still fall through to the original way.
Signed-off-by: Feng Wei <wei.feng@freescale.com>
In practice there is always at least one profile, and I
don't think there will ever be cards without profiles.
Therefore, I added assertions to pa_card_new() stating that
the card new data must always contain at least one profile.
Now a lot of code can be simplified, because it's guaranteed
that the profiles hashmap and the active_profile field are
always non-NULL.
While developing the new UI we had to ask ourselves the question of whether
"speakers" should be considered available when headphones are plugged in.
In most cases, they are not available and therefore we should list them
as such.
OTOH, we don't want unplugging the headphones to be considered an act of
wanting to use the speakers (the user might prefer HDMI), and there might
be line-outs that keeps the speakers from unmuting anyway. So, at this point,
I think the most reasonable would be to make the speakers have
PA_PORT_AVAILABLE_NO when headphones are plugged in and
PA_PORT_AVAILABLE_UNKNOWN when they are not. But we might want to revisit
this decision once we have the priority lists up and running.
The same reasoning applies for "Internal Mic", which should become unavailable
when any other mic is plugged in.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Support the new jack detection interface implemented in Linux 3.3
(and Ubuntu's 3.2 kernel).
Jacks are probed and detected using the snd_hctl_* commands, which
means we need to listen to them using fdlists. As this detection
needs to be active even if there is currently no sink for the jack,
so this polling is done on the card level.
Also add configuration support in paths, like this:
[Jack Headphone]
required-any = any
...where 'Jack Headphone' should match 'Headphone Jack' as given by
ALSA (as seen in e g 'amixer controls').
"Required", "required-any" and "required-absent" is supported. Using
required-any, one can have several ports even though there is no
other indication in the mixer that this path exists.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
To be able to add ports to all profiles, we need to probe all
profiles at startup. To speed this up, we now have a cache of
probes paths which is owned by the profile set. Since paths
are now owned by the profile set, the path set must now have
a hashmap of paths instead of a linked list.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
