This fixes the rare case of resume_time being bigger than time_stamp. Which
happens sometimes when a gstreamer client is quickly seeking through a
media file. The resulting integer underflow then causes a huge value in
current_time which will break the playback.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/764>
* Enable macOS specific modules (module-bonjour-publish,
module-coreaudio-detect and module-coreaudio-device)
* Correctly set `PA_SOEXT` (.so, .dylib and .dll)
* Build `poll-posix.c` and `semaphore-osx.c`
* Drop linker flag `-Wl,-z,nodelete` on Darwin
* Drop linker flag `-Wl,--no-undefined` on Darwin
* Prefer to `clock_gettime` over compat impl for old Darwin
* Disable SCM credential on Darwin
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/746>
Rate adjustment timer is set up when combine sink is resumed and relased when
combine sink is suspended. Do not create this timer again while module is loaded
to prevent duplicate effort causing assertion in time_callback.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/756>
Faststream backchannel decoder does not know whether incoming stream is mono or
stereo before first packet is decoded, and some devices return stereo stream.
As it is not easy to change source sample spec after source is created, use
stereo sample spec always and perform conversion if mono stream is found.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/628>
When a stream is started but has not yet called smoother_2_put(), pa_smoother_2_get()
returns the time since the start of the stream even if the stream was started paused.
When the stream is started paused, pa_smoother_2_get() should return 0 instead. This
patch fixes the problem.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/745>
When `indicator` is initialized to `1`:
- it always succeeds the `indicator == CIND_CALL_INDICATOR` check;
- hence always calls `continue`;
- hence never reaches the end of the `while` loop where `indicator++` is
called;
- hence `indicator` never contains any other value than `1` meaning
`cind_enabled_indicators` is ever updated.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/740>
This reverts commit b05e34e092.
Now that backend-native uses a different way to get to its own
`native_backend` instance - without going through
`pa_bluetooth_discovery` - this patch can be reverted again, as nothing
outside bluez5-util is supposed to know the internals of this struct.
That's what the many functions are for which all take pointers to this
(at that point) opaque struct instead.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/740>
This removes the inverse/recursive dependency of backend-native on the
`pa_bluetooth_discovery` struct, which is supposed to be opaque outside
of `bluez5-util` in favour of the many accessor functions defined in
`bluez5-util.h`.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/740>
Fix the following build failure without C++:
../output-1/build/pulseaudio-16.1/meson.build:1:0: ERROR: Unknown compiler(s): [['/home/autobuild/autobuild/instance-1/output-1/per-package/pulseaudio/host/bin/powerpc64-buildroot-linux-gnu-g++']]
The following exception(s) were encountered:
Running "/home/autobuild/autobuild/instance-1/output-1/per-package/pulseaudio/host/bin/powerpc64-buildroot-linux-gnu-g++ --version" gave "[Errno 2] No such file or directory: '/home/autobuild/autobuild/instance-1/output-1/per-package/pulseaudio/host/bin/powerpc64-buildroot-linux-gnu-g++'"
Fixes:
- http://autobuild.buildroot.org/results/6526a21bd4da3b8458188f27c1ec04c381e4b673
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/737>
AT+BIA is used to enable/disable CIND indicators by Bluetooth HFP spec.
By default, all indicators are enabled on connection.
AT+BIA will configure which indicators should be disabled then,
the disabled indicators may be enabled later on again with AT+BIA.
When the connection is lost and recovered, all indicators are enabled
again. The HF will reconfigure the indicators again with an AT+BIA
command.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/631>
Add libatomic_ops dependencies to libraries/modules that showed a
failure on an arch that does not have native atomic operations support.
Not all optional dependencies were tested, so it is possible that
some optional modules are still missing libatomic_ops dependencies.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/732>
The full identifier check must be executed for the new melem
creation, otherwise the duplicate control element code check
is reached.
Example (using the snd-aloop driver):
numid=56,iface=PCM,name='PCM Notify',device=1,subdevice=1
numid=62,iface=PCM,name='PCM Notify',device=1,subdevice=2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/730>
The new helem must be tracked and old helem must be cleared
to make the code work properly. Introduce the pointer to helem
as the private value for melem and add the necessary code.
Also, add a check for the duplicate mixer elements. The duplicate
mixer element invokes the abort check in alsa-lib. Print a warning
instead and handle the exit gracefully.
Fixes: def8eb074 ("alsa-mixer: allow to re-attach the mixer control element")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/730>
Right now we try to add all UCM devices of a verb to a single profile.
But if some devices using different PCMs are configured as conflicting
with one another, we will only be able to utilize one of them, chosen
seemingly based on the order in the UCM config file.
This is not a problem with conflicting devices sharing a PCM, as they
are assigned to the same mapping and the ports mechanism only enables
one of them to be active at a time.
To utilize all devices in a UCM verb even when there are conflicting
devices using different PCMs, calculate subsets of devices which
can be simultaneously used and create a profile for each such set.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
While switching profiles, it was enough to switch UCM verbs since that
disables all enabled UCM devices and every profile had a distinct verb.
However, switching to the current verb does not disable any devices.
To support multiple profiles for a verb we need to explicitly disable
the old profile's devices, since they might be conflicting with the new
profile's devices and will prevent them from being enabled. Compare both
profiles' mappings, and disable the devices not in the new mappings.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
After previous patches, we should be generating no combination ports, so
we don't need to store multiple modifiers per mapping. Simplify the code
based on this.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
After previous patches, we should be generating no combination ports, so
we don't need to store multiple devices per mapping. Simplify the code
based on this.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
After previous patches, we should be generating no combination ports, so
we don't need to store multiple devices per port. Simplify the code
based on this.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
A previous commit makes mapping names depend on the UCM device name.
Since UCM device names are unique, this means a mapping will at most
have one port and thus no combination ports can be generated.
This removes the dead code in the pa_alsa_ucm_add_ports_combination()
function, unrolls the remaining code in its helper functions that it
used, and renames it to pa_alsa_ucm_add_port() to signal that it no
longer generates combinations.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
PulseAudio combines UCM devices that have the same PlaybackPCM or
CapturePCM value into a single mapping with multiple ports. It also
creates ports in the same mapping for each valid combination of those
UCM devices.
Since mappings are the things we put in profiles, we can put in a
profile either all devices of a joint mapping or none of them. This
causes some complications with device conflicts. For example, a
different UCM device might be marked as conflicting with some (but not
all) of the devices in a joint mapping. In this case we can do one of
three things:
- Include all devices in one profile, and hope the conflicting device
isn't chosen as the mapping's active port. We shouldn't do this as it
puts conflicting devices in the same profile.
- Make one profile with the joint group, and one with the other device.
This is somewhat acceptable as we have no conflicts, but we sacrifice
some compatible combinations of devices.
- Do not group the devices into the same mapping, and make one profile
for each compatible combination of devices. This appears to be the
best option, one where we can always have the maximum number of
working devices.
This patch chooses the third option and makes one input and/or output
mapping per UCM device, by using UCM device names instead of PCM device
strings in the mapping names.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
Combination port logic calculates some useful properties for device
groups that we could reuse while generating multiple profiles to support
conflicting devices. Split them into their own functions.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
Right now this check is rejecting devices whose UCM config specifies
neither a conflicting device nor a supported device list, and accepting
devices which specify both. However, a device without neither list is
actually unrestricted, and a device with both lists is a configuration
error. Fix the check to accept the former.
Furthermore, this is missing another case where an already selected
device might have a supported devices list that doesn't have the
candidate device. Make this function also check against that, and also
make it accept devices already in the set.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
The existing code meant to generate device groups for combination ports
is tightly coupled to port creation. Similar functionality would be
useful to generate nonconflicting device groups for multiple profiles as
well, so this tries to rewrite it into a more reusable state.
Several things (e.g devices, mapping contexts) use idxsets to store a
device selection. This also switches this conformance check and device
group generation to using idxsets to make it easier to work with those,
with the eventual aim to unify device group representations.
Also try to adjust users of these functions to use idxsets these will
need/return, without causing too much interference.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
To support having multiple profiles per UCM verb, split the profile
creation into two parts based on whether they should run once for each
verb or for each profile (maybe multiple times per verb).
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/596>
