The optimized filter gets enabled when the code is compiled
with -mcpu=/-march options set to target the processors which
support ARMv6 instructions. This code is also disabled when
NEON is used (which is a lot better alternative). For additional
safety ARM EABI is required and thumb mode should not be used.
Benchmarks from ARM11:
== 8 subbands ==
$ time ./sbcenc -b53 -s8 -j test.au > /dev/null
real 0m 35.65s
user 0m 34.17s
sys 0m 1.28s
$ time ./sbcenc.armv6 -b53 -s8 -j test.au > /dev/null
real 0m 17.29s
user 0m 15.47s
sys 0m 0.67s
== 4 subbands ==
$ time ./sbcenc -b53 -s4 -j test.au > /dev/null
real 0m 25.28s
user 0m 23.76s
sys 0m 1.32s
$ time ./sbcenc.armv6 -b53 -s4 -j test.au > /dev/null
real 0m 18.64s
user 0m 15.78s
sys 0m 2.22s
The ORCC stage does this anyway (and this was buggy anyway as it had an extra
'src/' prefix so never worked properly when it was introduced in d6cdd80).
Thanks to Maarten Bosmans for pointing it out.
This adds volume scaling for 1- and 2-channel software volume scaling
using Orc. While testing the MMX and SSE backends on a Core2, I see an
~2x performance benefit over the hand-rolled MMX and SSE code. Since I
haven't been able to test on other architectures, the Orc code is only
used when MMX/SSE* is present. This can be changed in the future after
testing on AMD and ARM machines.
This reverts commit 95a98fe6f2.
Conflicts:
src/Makefile.am
src/pulsecore/envelope.c
src/pulsecore/envelope.h
src/tests/envelope-test.c
(part of a patch series removing all ramping code)
Using uClibc
AM_LIBADD = $(PTHREAD_LIBS) $(INTLLIBS)
is not empty because `$(INTLLIBS)` is set to `-lintl`. This uncovered a missing space in commit ef0cc745 which resulted in the following build error.
[…]
CC libbluetooth_ipc_la-ipc.lo
modules/bluetooth/ipc.c: In function 'bt_audio_service_open':
modules/bluetooth/ipc.c:65:26: warning: dereferencing type-punned pointer might break strict-aliasing rules [-Wstrict-aliasing]
modules/bluetooth/ipc.c: In function 'bt_audio_service_get_data_fd':
modules/bluetooth/ipc.c:110:13: warning: cast increases required alignment of target type [-Wcast-align]
modules/bluetooth/ipc.c:110:4: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
make[3]: *** No rule to make target `-lintl', needed by `libbluetooth-ipc.la'. Stop.
make[3]: Leaving directory `/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/pulseaudio-0.9.22-r11.0+gitr0+051d82133f0ae6a57bf66fd200bc8e3591a7d5ca/git/src'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/pulseaudio-0.9.22-r11.0+gitr0+051d82133f0ae6a57bf66fd200bc8e3591a7d5ca/git/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/pulseaudio-0.9.22-r11.0+gitr0+051d82133f0ae6a57bf66fd200bc8e3591a7d5ca/git'
make: *** [all] Error 2
This patch is taken from OpenEmbedded where it has been present since 2009 for PulseAudio 0.9.15 and greater [1].
[1] http://git.0pointer.de/?p=pulseaudio.git;a=commit;h=ef0cc74567b3bb98378c17f6a523bf18ba132ed7
[2] http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=7c33f2e906a20e139d53b4f2d8fbc2773a4725b3
Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
CC: Henning Heinold <heinold@inf.fu-berlin.de>
The check whether POSIX socket.h or WIN32 winsock2.h must be included can be
made centrally. The downside is that some functionality of e.g. arpa/inet.h is
also implemented in winsock.h, so that some files that don't use socket
functions, but do use inet.h functions, must also include pulsecore/socket.h.
(as well as arpa/inet.h)
This greatly simplifies the Orc-related make rules. The old system of
distributing generated files is gone, which means that anyone who wants
to build with Orc support enabled needs to have the orcc compiler
installed (presumably the orc 'devel' package in most distros).
The CFLAGS and LIBS of libsamplerate, libspeex and libsndfile are added to the pulse libraries depending on those libraries.
Also src/pulse/version.h is generated by configure, so it does not need to go in BUILT_SOURCES.
(Slightly tweaked by Colin Guthrie to fix a merge problem relating to BUILT_SOURCES)
This will make it possible to remove the empty Makefile.am files.
- module-...-symdef.h files are all generated in src/modules, instead of in the subdir of the module.
- The default inclusion of src/modules subdirs in AM_CFLAGS can be removed, where necessary (raop) the subdir is
included in the specific CFLAGS.
- The src/daemon and src/modules directories are always created on make, to facilitate out of tree builds.
- AM silent rules are used for the generation of symdef files by m4.
- For echo-cancel, keep the build dir include for now (and mkdir it) although limit it to just the echo-cancel
module's CFLAGS (Colin Guthrie)
This is needed to better support out of tree builds (including
distcheck) and to ensure the necessary folders are created in the
build tree on configure and also works around an intl-tools bug
(https://bugs.launchpad.net/intltool/+bug/605826)
The Makefile.am's used are minimal (and in some cases completely
blank). At present they do not include anything interesting
with the majority of the real work still done by the monolitic
src/Makefile.am
It may make sense to start splitting out src/Makefile.am into
smaller chunks but this commit makes the minimum changes to address
the issues that result from using make distcheck and other out of
tree builds.
Note: This 'breaks' the ability to type make in e.g. the src/modules
folder and have all of PA rebuilt accordingly (this is because the
static Makefiles previously present just did a "make -C ..") which
was purportedly for use in emacs. But I'm sure there will be a better
and more robust way to configure emacs to do your builds properly if
this behaviour is still desirable.
Wrong order of libraries causes libtool to link primarily from lirc
library location and not from $(libdir) location in install
phase. This is a problem if you have an older version pulseaudio libs
installed under same directory as liblirc and you are building a
newer version with some other directory prefix.
Build appeared to fails when a new function is added to
libpulsecommon. This is because build uses libpulsecommon that is
installed into system instead of the one that is being built. Explicit
linking to libpulsecommon fixes the problem.
As per discussions with Lennart, we will be moving to a two-component version
number scheme when the next release is made from git master branch.
This means we will be dropping the micro version component (although
for compatibility, it will remain defined as 0 in version.h).
For more information, please see the announcement here:
http://thread.gmane.org/gmane.comp.audio.pulseaudio.general/7921
This retains CPU information (processor type and supported features) in
pa_core, so that this information can be used by modules at init time to
figure out what optimisations may be used.
This adds Andre Adrian's AEC implementation from his intercom project
(http://andreadrian.de/intercom/) as an alternative to the speex echo
cancellation routines. Since the implementation was in C++ and not in
the form of a library, I have converted the code to C and made a local
copy of the implementation.
The implementation actually works on floating point data, so we can
tweak it to work with both integer and floating point samples (currently
we just use S16LE).
Make a new echo-cancel module that exposes a new sink and source. All data sent
to the sink is matched against the data captured from the source and
echo-canceled using the speex echo canceler.
Commits e8cb96c and 0c836aa created mixer paths but did not update
src/Makefile.am. Building a snapshot containing these two commits
therefore results in the user being unable to adjust the volume or
(un)mute through PA. Fix this by adding the two new mixer paths
files to src/Makefile.am.
Likewise, commit 66e1a2d created a profile for the M-Audio FastTrack
Pro USB but did not update src/Makefile.am. Fix this by adding the
profile to src/Makefile.am.
Avahi and dbus is too heavy for OSX just for the sake of publishing our
services via mDNS/Zeroconf. Apple has its own Zeroconf implementation
called Bonjour, and this patch adds a module that implements service
announcement with that API.
All data gathering is copied from module-zeroconf-publish.c, but
unfortunately the code there is too specifically made for avahi, so I
couldn't factor it out to reuse it.
This patch adds support for CoreAudio driven devices under Mac OS X. It
is typically instanciated by the CoreAudio device detection module and
handles all available streams on a specific device.
Sinks are created according to the reported stream configuration.
Float32 is used as default audio sample format at it is the only format
CoreAudio speaks natively.
Hardware volume control is not implemented yet.
This adds a new module for CoreAudio device detection. It registers a
callback to detect hotplugged devices and creates/destroys modules named
'module-coreaudio-device'. Devices are identified via a system-wide
unique AudioDeviceID.
