This uses the messaging API to initiate a codec switch.
While a particular codec might be applicable only for a particular
profile, for eg. aptX can only be applicable for A2DP sink or source
and not for let's say HSP, the codec switching logic has not been
tied to the logic for switching profiles.
Codec can be switched by running the following on the command line.
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec{"ldac_hq"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"ldac_mq"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"ldac_sq"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"aptx_hd"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"aptx"}
pacmd send-message /card/bluez_card.XX_XX_XX_XX_XX_XX/bluez switch-codec {"sbc"}
Codec name passed above is matched against pa_a2dp_codec->name. Note that
the match is case sensitive. XX_XX_XX_XX_XX_XX needs to be substituted with
the actual bluetooth device id.
Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/440>
This crash occurs when PA is connected to a phone through the oFono
backend.
When disabling the Bluetooth adapter, pa_bluetooth_device is removed before
hf_audio_card. Both keep refs on pa_bluetooth_transport. Those removal will
call pa_bluetooth_transport_free() from device_free() (bluez5-util.c) and
hf_audio_card_free() (backend-ofono.c).
In the end, the call to pa_bluetooth_transport_free() calls
pa_hasmap_remove() through pa_bluetooth_transport_unlink(), but since
memory has already been freed, the second try results in a segfault.
Triggering hf_audio_card removal during pa_bluetooth_device removal allows
hf_audio_card to be freed at the right time.
This patch introduce new modular API for bluetooth A2DP codecs. Its
benefits are:
* bluez5-util and module-bluez5-device does not contain any codec specific
code, they are codec independent.
* For adding new A2DP codec it is needed just to adjust one table in
a2dp-codec-util.c file. All codec specific functions are in separate
codec file.
* Support for backchannel (microphone voice). Some A2DP codecs (like
FastStream or aptX Low Latency) are bi-directional and can be used for
both music playback and audio call.
* Support for more configurations per codec. This allows to implement low
quality mode of some codec together with high quality.
Current SBC codec implementation was moved from bluez5-util and
module-bluez5-device to its own file and converted to this new A2DP API.
There are actually two HSP HS UUIDs. My theory is that the second one
was added, because someone was not happy with the old UUID being used
for identifying two different things (the HSP profile as a whole, and
the HS role within the HSP profile). Some headsets only use the new
UUID, and those headsets won't work if we don't recognize the new UUID.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=93898
This patch changes the behavior of the headset=auto switch for module-bluez5-discover.
With headset=auto now both backends will be active at the same time for the AG role and
the switching between the backends is only done for the HS role.
headset=ofono and headset=native remain unchanged.
This allows to use old HSP only headsets while running ofono and to have headset support
via pulseaudio if ofono is started with the --noplugin=hfp_ag_bluez5 option.
A recent patch changed the MTU size from the default value of 48 to the value
returned by getsockopt(). This breaks HSP for some setups. To circumvent the
problem, this patch introduces a boolean parameter "autodetect_mtu" for
module-bluetooth-discover, module-bluez5-discover and module-bluez5-device to
make this use of getsockopt() configurable.
A hashmap is more convenient than a linked list for storing the UUIDs,
so change the BlueZ 4 code accordingly.
Rename the BlueZ 4 UUID constants to match the BlueZ 5 naming.
The only changes to the BlueZ 5 code are the addition of one comment
and making another comment a bit clearer.
The CONNECTION_CHANGED hook is used to notify the discovery module
about new and removed devices. When a bluetooth device connects, the
hook used to be called immediately when the first profile connected.
That meant that only one profile was marked as available during the
card creation, other profiles would get marked as available later.
That makes it hard for module-card-restore to restore the saved
profile, if the saved profile becomes available with some delay.
module-card-restore has a workaround for this problem, but that turned
out to interfere with module-bluetooth-policy, so the workaround will
be removed in the next patch.
The BlueZ 4 code doesn't need changes, because we use the
org.bluez.Audio interface to get a notification when all profiles are
connected.
FSF addresses used in PA sources are no longer valid and rpmlint
generates numerous warnings during packaging because of this.
This patch changes all FSF addresses to FSF web page according to
the GPL how-to: https://www.gnu.org/licenses/gpl-howto.en.html
Done automatically by sed-ing through sources.
This patch adds a module argument "headset=ofono|native|auto" to
module-bluetooth-discover and module-bluez5-discover.
To make Arun's happy, the default is 'native' if compiled in, otherwise
'ofono'. 'Auto' will try to autoswitch depending on whether ofono is
running or not.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This implements some autodetect if both headset backends are compiled in:
First we try to contact the oFono service, if that's not working,
then we start the native backend instead.
Likewise if the oFono service is going offline/online, we load/unload
the native backend accordingly.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Enable both ofono and native backends to be built into the same
libbluez5-util. Never build the null backend.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Parse the gain changed AT commands from the headset and fire 2 new
hooks as a result. The device will connect to those hooks and change the
source/sink volumes.
When the source/sink volume changes, set the gain on the microphone or
speaker respectively. Make sure we do nothing if the transport can not
handle the gain changes.
This commit adds basic support for devices implementing HSP Headset
Unit, HSP Audio Gateway, HFP Handsfree Unit, HFP Audio Gateway to the
BlueZ 5 bluetooth audio devices driver module (module-bluez5-device).
There are several intertwined changes that I couldn't separate into
nicer commits. This is mostly just refactoring, but this also fixes
a bug: the old code set the device valid in parse_device_properties()
even if the device's adapter was invalid (had NULL address).
To improve the clarity of the code, I split the device_info_valid
variable into two booleans: properties_received and valid.
I added function device_update_valid() that checks all conditions that
affect the device validity. The function can then be called from any
place where something changes that potentially affects the device
validity. However, currently the only validity-affecting thing that
can change is the device adapter, so device_update_valid() is only
called from set_device_adapter().
I added the aforementioned set_device_adapter() function so that
whenever the adapter is set, the device validity gets updated
automatically.
The new properties_received variable allowed me to remove the
is_property_update function parameters.
This is a cosmetic change. There are a couple of places where we check
whether the adapter object is valid, and while checking whether the
address property is set works just fine, I find it nicer to have a
dedicated flag for the object validity. This improves maintainability
too, because if there will ever be more adapter properties that affect
the adapter validity, the places that check if the adapter is valid
don't need to be updated.
bluetoothd always send the GetManagedObjects() reply messages with the
objects array argument following an in-depth order starting from the
root. That means parents will always be known at the time their children
objects are parsed, if clients parse the objects in the same order they
appear in the array, as we do in PulseAudio.
This commit tries to protect PulseAudio in the case bluetoothd changes
that behavior for some reason. It hasn't been tested, since this
situation never occurs.
Create the pa_bluetooth_transport structure to store information about
the bluetooth transport and utility functions to manipulate this
structure. The acquire() and release() operations are function pointers
in the pa_bluetooth_transport structure to make possible for different
transport backends to provide different implementations of these
operations. Thre is also a userdata field for the transport backend
provide data for the acquire/release functions.
This commit also creates a new function
pa_bluetooth_device_any_transport_connected() to check if there is any
audio connection between the host and a remote device.
pa_bluetooth_discovery is the struct that holds information about known
Bluetooth audio devices and other information about the Bluetooth stack.
This commit also creates bluez5-util.[ch], which will hold a lot of
utility functions to help with the BlueZ 5 support.
