Port creation is now slightly different. It is now similar to how
other objects are created (e.g. sinks/sources/cards).
This should become more useful in the future when we move more stuff to
the ports.
Functionally nothing has changed.
This commit makes the code cleaner, avoiding unnecessary line breaks. It
also changes the debug message elements order, to make it look more
natural ("path, interface, member" instead of "interface, path,
member").
This means that the path names will always correspond to the
path configuration file names, so they will automatically be
unique (in the scope of one card).
Previously the path description was looked up based on the
path name only. Since there can be multiple paths that use
the same description, it had to be possible to have multiple
paths with the same name.
Having the same name with multiple paths makes identifying
the paths more complex than necessary, so the plan is to
make it impossible to have paths with the same name. This
patch prepares for that by retaining the possibility to
still have the same description with multiple paths. Instead
of the path name, the path description is looked up by using
the "path description key" if it is set (path name is still
used as a fallback lookup key).
As an extra, I broke try_to_switch_profile() into smaller
functions, because the two levels of loops with continue
statements inside both were a bit hard to follow.
get_latency_us() used an uninitialized variable, and an incorrect
scope for some of the AudioObjectGetPropertyData() calls. As a result,
audio would randomly not work at all.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=65122
e->description is a pointer, not a fixed char array. Hence it
makes no sense to use strncmp.
This fixes a compiler warning when compiling under Ubuntu.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
A stationary computer usually has headphone jack(s) and line out jacks.
In some cases analog-output.conf will be a subset of
analog-output-headphones.conf, causing line outs to be unusable (because
headphones are unplugged).
This late in the cycle, this was the safest way I could think of to try
to fix this for a particular computer. In later versions of PulseAudio
we could consider making a dedicated line out path instead, and have
proper jack detection there.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
send_counter/recv_counter relate to the bytes (play stream) passed
through the queue, hence the same sample spec must be used
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Acked-by: Stefan Huber <shuber@sthu.org>
As far as I can see, having a mono path in a stereo mapping doesn't
make any sense. It also causes breakage: if the Master Mono mixer
element has two volume channels, the analog-output path gets removed
due to being a subset of analog-output-mono, and that in turn causes
the Master element getting muted. Users generally don't like that.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=54673
When a "Headphone Mic" jack becomes available, we do not know if
a headphone or a mic has been plugged in. Therefore, setting both
paths to "unknown" is, in theory, the correct thing to do.
However, in practice, people are more likely to plug in a headphone
rather than a mic. Therefore, allow autoswitch to the headphone port
when the jack is plugged in.
A more advanced implementation would consider what was plugged in last
time depending on what port was selected on the input side at that
time, and set availability accordingly. However, such an implementation
will have to wait (probably at least until we have our fancy routing
system implementation).
Buglink: https://bugs.launchpad.net/bugs/1169143
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
I recently came across a device without any ALSA-level mixer controls,
everything was physical knobs on the hardware.
This patch enables that device to get a port too ("Analog Input").
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The hdmi_eld_changed callback is called by alsa-lib at shutdown.
In that case, just exit instead of trying to access something with
already closed handles.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
If a card is hot-plugged (which all cards will be when we load
this module before module-*-detect), make sure we don't start up
a sink with an unavailable port selected.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This way port availability has been filled in when we create the
sink, which will later enable us to pick the right port directly.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
We know we always serve up LPCM, and exposing this via D-Bus lets Rygel
set the appropriate metadata while presenting the raw (i.e.
non-transcoded) stream to clients.
A recent patch changed the path files from PA_BUILDDIR to PA_SRCDIR.
Do the same to the profile-set files for consistency (and to fix
out of tree builds).
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The mixer paths are not available in ${builddir} - we need to look in
${srcdir}. This should fix running an in-tree build without make install
as well as alsa-mixer-path-test in make distcheck.
Since the most straightforward way to define PA_SRCDIR was in
Makefile.am, I'm moving PA_BUILDDIR there as well for consistency.
On some machines which has a headset jack, the headset mic does not have its own
jack detection. Then we can look at the headphone jack to get some indication:
We know that if the headphone is unplugged, so is the headset mic. The opposite
is not guaranteed since the user might have plugged in a headphone, not a headset.
Also, there exist multi-function jacks which support both Headphone, Mic in headphone jack
and Headset Mic. In this case the jack name will be "Headphone Mic", not "Headphone", so
we need to include this name too.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Found on Logitech B530 USB Headset / kernel 3.8. Because we don't
have different path for headset and headphone today, just add
Headset to the existing headphone path.
BugLink: https://bugs.launchpad.net/bugs/1159687
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Due to a misconfiguration on my side my hdmi card didn't load with
snd-hda-codec-hdmi but through the fallback mechanism. Pulseaudio
would crash during early because hctl_handle was null, so skip
init_eld_ctls when hctl_handle is null to prevent a crash.
Thanks to David Henningsson for helping me find the underlying issue.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
It's valid for a path to have zero elements, e g if it contains
a single jack only. Earlier, this would cause an assertion failure
in pa_path_condense.
Also convert pa_bool_t to bool.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This reverts commit a9c3f2fb0f.
It has been recently agreed that ports should somehow have some physical
meaning, leading to the port merge in module-bluetooth-device.
With this assumption in mind, it is very unlikely that a card would
add or remove ports dynamically. Therefore, the core can be simplified
by removing the support for this.
The revert affects the code added to module-card-restore in commit
a1a0ad1af2, which can now be partially
removed.
Conflicts:
src/pulsecore/card.c
src/pulsecore/core.h
On a multi-homed system, the user may wish RTP to be used only on
specific interfaces. The default binding of 0.0.0.0 for the source
address causes SAP multicast on all interfaces, which is not ideal.
Introduce a new module argument, that allows selection of the source IP,
and thus interface.
(changes in v2: s/srcip/source_ip)
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The module argument 'source' already has special meaning as the
pa_source, however, the argument 'destination' expects an IP address.
Prior to introducing a source IP modarg for the source IP address,
rename the 'destination' argument to 'destination_ip'. Include
compatibility support for old RTP users so they don't need to change
their module usage immediately.
(changes in v2: minor formatting fixes, s/dstip/destination_ip)
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Before introducing new functionality, clarify the variable names
dest -> dst_addr
sa[46] -> dst_sa[46]
sap_sa[46] -> dst_sap_sa[46]
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
It's fairly uncommon, but it happens that jack detection is enabled
for some reason, e g hardware design. In that case, we cannot use
jack detection, but we can still use the hint to pick up that there
is a path.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
u->asyncmsg is accessed from two IO threads. teardown() shouldn't
flush the queue from the main thread while both IO threads are still
potentially using the queue. This patch fixes that error by flushing
the queue from the sink input thread when the sink input is being
unlinked.
Flushing the queue in teardown() caused this assertion in
pa_asyncmsgq_get() to crash sometimes: pa_assert(!a->current)
process() may be called with a stream that doesn't have its sink/source set.
This can happen if the proplist change callback is called when the stream is
moving.
The sink input may_move_to() callbacks can be called while the source
output is not connected to any source (i.e. is currently moving too),
and vice versa.
Thanks to Frédéric Dalleau for reporting this bug.
Previously, a drain request was acknowledged up to two hw buffers
too late, causing unnecessary delays.
This implements a new chain of events called process_underrun
which triggers exactly when the sink input has finished playing,
so the drain can be acknowledged quicker.
It could later be improved to give better underrun reporting to
clients too.
Tested-by: Dmitri Paduchikh <dpaduchikh@gmail.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The previous volume handling could cause ear damage: by default the
ladspa sink volume was 100%, and with flat volumes that would cause
the master sink volume to jump to 100% too.
