The module doesn't build any more[1], and when starting to investigate
the build failure, I asked the module author if he'd know something
about the breakage. He said that he didn't know about backward
compatibility problems with libxen, but more importantly, he said that
the module probably doesn't have any users[2]. It doesn't make sense to
keep maintaining a module that doesn't have users, so let's drop it.
[1] https://bugs.freedesktop.org/show_bug.cgi?id=98793
[2] https://lists.freedesktop.org/archives/pulseaudio-discuss/2016-November/027172.html
SW: Pulseaudio 8.0 / BlueZ 5.39
Symptoms:
While disconnecting/reconnecting a paired bluetooth headset (LG HBS750)
audio fails roughly on every other connection.
On a failed connection "pactl list cards" shows the bluetooth device's
card but "Active Profile: off". Issuing "pacmd set-card-profile X
a2dp_sink" makes audio work immediately.
I realized that when this happened, the previous disconnection did not
remove the card, instead it was only configured for "Active Profile:
off" but otherwise left in place.
Upon looking at PA debug logs I saw that the transport for the a2dp_sink
was first set into disconnected state and then into idle state. In
"device_connection_changed_cb()" this causes the
"pa_bluetooth_device_any_transport_connected()" return true and the
module-bluez5-device is not unloaded.
Further investigation shows that this is caused by a race of
module-bluez5-device.c:thread_func() and
MediaPoint1::ClearConfiguration().
When the FD in thread_func() is closed (POLLHUP) an
BLUETOOTH_MESSAGE_STREAM_FD_HUP message is sent into the main thread.
The handler of this message unconditionally sets the transport into IDLE
state. This is a problem if it has already been set into DISCONNECTED
state.
Openssl 1.1.0 made all structs opaque, which caused a build failure in
raop_client.c. The struct member assignments are now replaced with a
call to RSA_set0_key().
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=96726
Reviewed-by: Felipe Sateler <fsateler@debian.org>
KTH is a Swedish institution of higher education, and in its full name
spelled Kungliga Tekniska högskolan.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Bluez5 uses different profile names as bluez4, so we need to check for
a2dp_sink and headset_head_unit too for bluez5 support.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
module-xenpv-sink.c - In pa__init(...), memory for pa_modargs *ma is not released before returning from function.
Signed-off-by: Deepak Srivastava <srivastava.d@samsung.com>
systemd-hostnamed provides an icon for the machine it is running on.
If it is running, module-zeroconf-publish uses this icon for the
'icon-name' attribute in the Avahi properties. module-zeroconf-discover
passes this icon to module-tunnel using the module parameter
{sink/source}_properties.
This allows to display a portable, desktop or phone instead of
the generic sound card icon.
CID 1353122
this is a false-positive because
if (dbus_message_has_interface(p->message, "org.bluez.Manager") ||
dbus_message_has_interface(p->message, "org.bluez.Adapter"))
d = NULL;
else if (!(d = pa_hashmap_get(y->devices, dbus_message_get_path(p->message)))) {
pa_log_warn("Received GetProperties() reply from unknown device: %s (device removed?)",
dbus_message_get_path(p->message));
goto finish2;
}
d can be NULL only if p->message interface is org.bluez.Manager or
org.bluez.Adapter. If
dbus_message_is_method_call(p->message, "org.bluez.Device", "GetProperties")
returns true, we know that the interface is org.bluez.Device.
thanks, Tanu!
The pipe buffer is likely to be a power of 2 (e.g. 4096 bytes). This
works nicely for 16 bit stereo samples but breaks when using 24 bit
samples.
This patch aligns the buffer using pa_frame_align().
create_card_profile() used to get called separately for HSP and HFP,
so if a headset supports both profiles, a profile named
"headset_head_unit" would get created twice. The second instance would
get immediately freed, so that wasn't a particularly serious problem.
However, I think it makes more sense to create the profile only once.
This patch makes things so that before a profile is created, we check
what name that profile would have, and if a profile with that name
already exists, we don't create the profile.
A couple of Yocto releases (jethro and krogoth) have non-upstream
patches that suffer from this double creation. The patches add
associations between profiles and ports, and those associations use
the profile name as the key. When the second profile gets freed, the
associations between the profile and its ports get removed, and since
the profile name is used as the key, this erroneously affects the
first profile too. Crashing ensues.
BugLink: https://bugzilla.yoctoproject.org/show_bug.cgi?id=10018
Add transport_set_state() that encapsulates changing the variable,
logging and firing the change hook.
I also made a cosmetic change to the corresponding BlueZ 5 log
message so that both messages have the format that I like.
A hashmap is more convenient than a linked list for storing the UUIDs,
so change the BlueZ 4 code accordingly.
Rename the BlueZ 4 UUID constants to match the BlueZ 5 naming.
The only changes to the BlueZ 5 code are the addition of one comment
and making another comment a bit clearer.
The properties_received flag affects whether the device should be
considered valid, so let's update the valid flag after setting the
properties_received flag.
There's a call to device_update_valid() anyway later when setting
the device adapters, so this change isn't strictly necessary, but
this makes it more obvious that the code is correct (and less
fragile).
module-card-restore should only restore the initial state of new
cards, but profile_available_changed_callback() changed the profile
whenever the saved profile became available. That caused interference
with module-bluetooth-policy, which also sets card profiles based on
the availability changes.
The original reason for having this code was to work around the
problem that bluetooth cards used to be created with only one profile
available, and other profiles would become available soon after the
card creation. Now the bluetooth card creation is delayed until all
profiles are available, so this bad workaround can be removed.
Discussion:
https://lists.freedesktop.org/archives/pulseaudio-discuss/2016-August/026575.html
The CONNECTION_CHANGED hook is used to notify the discovery module
about new and removed devices. When a bluetooth device connects, the
hook used to be called immediately when the first profile connected.
That meant that only one profile was marked as available during the
card creation, other profiles would get marked as available later.
That makes it hard for module-card-restore to restore the saved
profile, if the saved profile becomes available with some delay.
module-card-restore has a workaround for this problem, but that turned
out to interfere with module-bluetooth-policy, so the workaround will
be removed in the next patch.
The BlueZ 4 code doesn't need changes, because we use the
org.bluez.Audio interface to get a notification when all profiles are
connected.
With this patch module-bluetooth-policy automatically switch from a2dp profile
to hsp profile if some VOIP application with media.role=phone wants to start
recording audio.
By default a2dp profile is used for listening music, but for VOIP calls is
needed profile with microphone support (hsp). So this patch will switch to
hsp profile if some application want to use microphone (and specify it in
media.role as "phone). After recording is stopped profile is switched back
to a2dp. So this patch allows to use bluetooth microphone for VOIP applications
with media.role=phone automatically without need of user interaction.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Replace the current latency controller with a modified P-controller. For
better readability separate the controller function. For small latency
differences, the controller forms a classical P-controller while it saturates
at 1% deviation from the base rate for large latency differences.
After switching source or sink, call adjust_rates after a third of a second
instead of waiting one full adjust time. This will ensure that latency regulation
starts as soon as possible.
Restaring the timer and obtaining the latency snapshots belong to the timer callback.
To maintain an adjust time as near as possible to the configured value, the timer is
now restarted immediately at the beginning of the timer callback.
To improve the overall latency estimation, the delay between the two snapshots
is taken into account. To minimize the snapshot delay, the order of the snapshots
is reverted. Additionally the latency at the base rate is calculated. It will be
used later as the input to the latency controller.
The delay and render memblockq are using the source and sink sample specs,
so using pa_bytes_to_usec() will produce better estimates of the delays than
using pa_resmpler_result(). Because the delays are considered to be part of
the sink or source latency, they are added to them. source_output_buffer
becomes obsolete.
The alsa card hasn't so far set any availability for profiles. That
caused an issue with some HDMI hardware: the sound card has two HDMI
outputs, but only the second of them is actually usable. The
unavailable port is marked as unavailable and the available port is
marked as available, but this information isn't propagated to the
profile availability. Without profile availability information, the
initial profile policy picks the unavailable one, since it has a
higher priority value.
This patch adds simple logic for marking some profiles unavailable:
if the profile only contains unavailable ports, the profile is
unavailable too. This can be improved in the future so that if a
profile contains sinks or sources that only contain unavailable ports,
the profile should be marked as unavailable. Implementing that
requires adding more information about the sinks and sources to
pa_card_profile, however.
BugLink: https://bugzilla.yoctoproject.org/show_bug.cgi?id=8448
I want module-alsa-card to set the availability of unavailable
profiles before the initial card profile gets selected, so that the
selection logic can use correct availability information.
module-alsa-card initializes the jack state after calling
pa_card_new(), however, and the profile selection happens in
pa_card_new(). This patch solves that by moving parts of pa_card_new()
to pa_card_choose_initial_profile() and pa_card_put().
pa_card_choose_initial_profile() applies the profile selection policy,
so module-alsa-card can first call pa_card_new(), then initialize the
jack state, and then call pa_card_choose_initial_profile(). After that
module-alsa-card can still override the profile selection policy, in
case module-alsa-card was loaded with the "profile" argument. Finally,
pa_card_put() finalizes the card creation.
An alternative solution would have been to move the jack
initialization to happen before pa_card_new() and use pa_card_new_data
instead of pa_card in the jack initialization code, but I disliked
that idea (I want to get rid of the "new data" pattern eventually).
The order in which the initial profile policy is applied is reversed
in this patch. Previously the first one to set it won, now the last
one to set it wins. I think this is better, because if you have N
parties that want to set the profile, we avoid checking N times
whether someone else has already set the profile.
LADSPA allows float format only, but module-ladspa-sink possibly
could be loaded with ***any*** 'format' parameter. Therefore noisy
sound heard. This patch avoids to be configured as invalid format.
Signed-off-by: KimJeongYeon <jeongyeon.kim@samsung.com>
Signed-off-by: Arun Raghavan <arun@arunraghavan.net>
If a card has been hot-plugged after pulseaudio start, alsa-lib still has
old configuration in memory, which doesn't have PCM definitions for the
new card. Thus, this error appears, and the device doesn't work:
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.front.0:CARD=0'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM front:0
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
The snd_config_update_free_global() function makes alsa-lib forget any
cached configuration and reparse all PCM definitions from scratch next
time it is told to open anything.
The trick has been copied from Phonon.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=54029
Signed-off-by: Alexander E. Patrakov <patrakov@gmail.com>
For various use-cases a passthrough stream should have priority over all
other streams and get exclusive access to the sink regardless of whether
any other streams are playing.
An example use-case is ensuring Kodi can successfully start video
playback (with passthrough) even if an external notification sound
happened to be playing at the same time.
Signed-off-by: Arun Raghavan <git@arunraghavan.net>
We ended up dealing with it once in module init, and once more in the
new module callback. Avoiding it in the second case by name seems to be
the cleanest solution (else, we need to store the module index somewhere
in pa_dbusiface_core, which seems about as bad).
Signed-off-by: Arun Raghavan <arun@arunraghavan.net>
Commit ae415b07a0 ("dbus: Use hooks for
module new and removed events") changed the new module monitoring from
the asynchronous subscription system. Previously handle_load_module()
created the new pa_dbusiface_module object before we got
a notification of the loading of the module, but now we get the
notification already within the pa_module_load() call. That resulted
in a crash, because the module_new_cb() created the
pa_dbusiface_module object before pa_module_load() returned, and then
handle_load_module() would create another pa_dbusiface_module object
for the same module.
This patch removes the pa_dbusiface_module_new() call from
handle_load_module(). module_new_cb() is now responsible for all
pa_dbusiface_module object creations, except the ones that are created
during the initialization of module-dbus-protocol.
Signed-off-by: Arun Raghavan <arun@arunraghavan.net>
