FSF addresses used in PA sources are no longer valid and rpmlint
generates numerous warnings during packaging because of this.
This patch changes all FSF addresses to FSF web page according to
the GPL how-to: https://www.gnu.org/licenses/gpl-howto.en.html
Done automatically by sed-ing through sources.
When line out path is active, we want to mute speakers for obvious
reasons, and headphones to avoid volume spikes.
Reported-by: TienFu Chen <tienfu.chen@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
pa_source_state_t can have value PA_SOURCE_INVALID_STATE, not
PA_SINK_INVALID_STATE. It happens to be the same here, but it can break
sometimes.
Issue detected by PVS Studio.
I noticed that when resuming the tunnel sink, there was a small amount
of previously played audio before the new audio started to play.
Normally that probably wouldn't be noticeable, because there would be
a few seconds of silence played before suspending the sink due to
inactivity, so the unwanted old audio would be just silence, but in my
configuration sinks are suspended immediately when there's nothing
playing to them, so the glitch becomes audible.
The bluetooth card is created when the first profile becomes
available, which means that the card may have profiles that are not
available when the card is initialized. If module-card-restore tries
to restore such profile, that will fail, and the card will be
initialized with the "off" profile active.
This patch modifies module-card-restore so that if follows the profile
availability status, and when the saved profile becomes available, it
is activated. Additionally, module-card-restore is modified so that it
doesn't even try to restore unavailable profiles, when the necessary
information is available. In practice there are two existing places
where the profile is restored, and only one of those contexts has the
necessary information available. Unfortunately, it's the more
important context (card creation) where the information is not
available. This means that module-card-restore will set the initial
profile of a new card even if the profile is unavailable, and this
will cause an ugly warning in the log, even though there's nothing
abnormal happening.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=87081
In case a transport is currently disconnected and transitions to
idle, that should not count as a "remote hang up" event.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Because the adapters reference the devices hashmap on free, we mush
free the adapters hashmap first and then the devices hashmap.
Reported-by: Alexander Patrakov <patrakov@gmail.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Send the right command to set the speaker and microphone gain.
Note that setting the volume on the Headset should use the unsolicited
result code. Receiving the volume from the Headset uses the AT
command.
get rid of the following warning when compiling with NDEBUG:
modules/alsa/alsa-mixer.c: In function 'element_is_subset':
modules/alsa/alsa-mixer.c:3125:18: warning: 'a_limit' may be used uninitialized in this function [-Wmaybe-uninitialized]
long a_limit;
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
supresses a warning when compiling with NDEBUG:
pulsecore/aupdate.c: In function 'pa_aupdate_read_end':
pulsecore/aupdate.c:82:14: warning: variable 'n' set but not used [-Wunused-but-set-variable]
unsigned n;
pulsecore/sink-input.c: In function 'pa_sink_input_unlink':
pulsecore/sink-input.c:648:27: warning: variable 'p' set but not used [-Wunused-but-set-variable]
pa_source_output *o, *p = NULL;
pulsecore/sink-input.c: In function 'find_filter_sink_input':
pulsecore/sink-input.c:1523:14: warning: unused variable 'i' [-Wunused-variable]
unsigned i = 0;
pulsecore/sink-input.c: In function 'pa_sink_input_start_move':
pulsecore/sink-input.c:1569:27: warning: variable 'p' set but not used [-Wunused-but-set-variable]
pa_source_output *o, *p = NULL;
CC pulsecore/libpulsecore_5.0_la-sink.lo
pulsecore/sink.c: In function 'pa_sink_unlink':
pulsecore/sink.c:673:24: warning: variable 'j' set but not used [-Wunused-but-set-variable]
pa_sink_input *i, *j = NULL;
pulsecore/source-output.c: In function 'find_filter_source_output':
pulsecore/source-output.c:1179:9: warning: unused variable 'i' [-Wunused-variable]
int i = 0;
CC pulsecore/libpulsecore_5.0_la-source.lo
pulsecore/source.c: In function 'pa_source_unlink':
pulsecore/source.c:616:27: warning: variable 'j' set but not used [-Wunused-but-set-variable]
pa_source_output *o, *j = NULL;
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Fixes warning: 'new_active' may be used uninitialized in this function,
and could potentially cause erronous behaviour in case an invalid port
name was specified.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
In case there are two independent jacks for one port (e.g. Dock
Headphone Jack and Headphone Jack), the availability ends up being
incorrect if the first one was _NO (not plugged) and the second gets
_YES (plugged). Also pulse complains about the state being inconsistent
which isn't true.
Fix this by preferring more precise states (yes/no) over unknown and yes
over others. However in case a plugged jack makes the port unavailable
let that overrule everything else.
The old code tried to look up the port object by using an object path,
but the ports hashmap uses port names as keys, so the method failed
always.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=85369
This patch adds a module argument "headset=ofono|native|auto" to
module-bluetooth-discover and module-bluez5-discover.
To make Arun's happy, the default is 'native' if compiled in, otherwise
'ofono'. 'Auto' will try to autoswitch depending on whether ofono is
running or not.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This implements some autodetect if both headset backends are compiled in:
First we try to contact the oFono service, if that's not working,
then we start the native backend instead.
Likewise if the oFono service is going offline/online, we load/unload
the native backend accordingly.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Enable both ofono and native backends to be built into the same
libbluez5-util. Never build the null backend.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Commit fa092af59c removed an argument to pa_rtpoll_run, but
forgot to remove that argument for all callers to pa_rtpoll_run.
This commit removes the remaining ones.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
frames_per_block is the mempool's maximum block size in frames
v2 (thanks David Henningson)
* rename max_frames to frames_per_block
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
These two control names are currently being added to the HDA driver,
so let's support them in PulseAudio as well.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The analog-output path should be suppressed when there are more
specific paths available. Currently that usually doesn't happen. The
suppression can be done with the path subset detection, and this patch
makes that work (another approach would be to mark the elements as
required-absent, like analog-input does, but I like the subset
suppression more, because it requires less stuff in the configuration
files). The problem with listing the now-removed elements in
analog-output.conf was that if the sound card had e.g. a Speaker
element, then the switch behaviour was different between analog-output
and analog-output-speakers, so analog-output was not considered a
subset of analog-output-speakers.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=74609
We weren't writing out one character from the "OK" response, and the
"AT" part of the "+VGS" and "+VGM" commands was missing. Also, the spec
says that the command is terminated by only a CR and not an LF (probably
doesn't hurt, but let's adhere to the spec for now).
Parse the gain changed AT commands from the headset and fire 2 new
hooks as a result. The device will connect to those hooks and change the
source/sink volumes.
When the source/sink volume changes, set the gain on the microphone or
speaker respectively. Make sure we do nothing if the transport can not
handle the gain changes.
Add a simple native headset backend that implements support for the
blutooth HSP profile.
This allows pulseaudio to output audio to a Headset using the HSP profile.
Make the native backend the default.
There is no use in trying to load data in legacy format, if we
already know that there is no data at all.
Also clarify in the debug message whether there is invalid data
or no data at all.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
This fixes a bug in latency configuration. The wrong type in the cast
caused UINT64_MAX being not treated as special, so the configured
latency was set to UINT64_MAX usecs, which of course is absurdly huge
latency.
This should not have any effect on behaviour. The goal is to align
with the pattern that I think we should follow:
Object initialization:
- put() is the place to create references from other objects to the
newly created object. In this case, adding the transport to
discovery->transports was moved from new() to put, and adding the
transport to device->transports was moved from set_state() to
put().
Object destruction:
- unlink() undoes put() and removes all references from other objects
to the object being unlinked. In this case setting the
device->transports pointer to NULL was moved from set_state() to
unlink(), and setting the discovery->transports pointer to NULL was
moved from free() to unlink().
- free() undoes new(), but also calls unlink() so that object owners
don't need to remember to call unlink() before free().
The default maximum latency is 10 seconds, which is not good,
especially since the tunnel sink doesn't support rewinding. Due to the
lack of rewinding, e.g. volume changes take a long time with large
latencies.
It seems at some point the code migrated to use the entry_write calls,
but fill_db is still using the old syntax, causing the entry to be
invalid.
The crash happens when clean_up_db gets called, which then calls
entry_read, causing the crash.
Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
If the keyboard is unplugged, it looks like the kernel is reporting
back -ENODEV when trying to close the fd. This is probably a kernel
error, but still, it's better to complain than to crash.
Buglink: https://bugs.freedesktop.org/show_bug.cgi?id=80867
Reported-by: Stelios Bounanos
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
