FSF addresses used in PA sources are no longer valid and rpmlint
generates numerous warnings during packaging because of this.
This patch changes all FSF addresses to FSF web page according to
the GPL how-to: https://www.gnu.org/licenses/gpl-howto.en.html
Done automatically by sed-ing through sources.
The IS_ACTIVE() macro does a pa_sink/source_get_state() on our sink and
source, which does not work in the state change callback, since the
state is not actually committed at that point.
The callback just called pa_source_output_get_mute(), which doesn't
have any side effects, and the return value wasn't used either, so
the callback was essentially a no-op.
This patch removes all occurrences of double and triple
newlines.
Command used for this:
find . -type d \( -name ffmpeg \) -prune -o \
-regex '\(.*\.[hc]\|.*\.cc\)' \
-a -not -name 'adrian-aec.*' -a -not \
-name reserve.c -a -not -name 'rtkit.*' \
-exec sed -i -e '/^$/{N;s/^\n$//}' {} \;
Two passes were needed to remove triple newlines.
The excluded files are mirrored files from external sources.
This patch replaces every occurrence of ')\n{' with ') {'.
Command used for this:
find . -type d \( -name ffmpeg \) -prune -o \
-regex '\(.*\.[hc]\|.*\.cc\)' \
-a -not -name core-util.c -a -not \
-name adrian-aec.c -a -not -name g711.c \
-exec sed -i -e '/)$/{N;s/)\n{$/) {/}' {} \;
The excluded files are mirrored files from external sources.
send_counter/recv_counter relate to the bytes (play stream) passed
through the queue, hence the same sample spec must be used
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Acked-by: Stefan Huber <shuber@sthu.org>
Enable advanced AEC methods to use different specs (i.e., number of
channels) for rec and out stream. A typical application is beam forming
resp. multi-channel AEC, which takes multiple record channels to produce
an echo-canceled output stream.
This commit alters the EC API as follows: the EC's init() used to get
source and sink's sample spec/channel map. The new interface renamed
source to rec and sink to play and additionally passes sample spec and
channel map of the out stream. The new parameter names of init()
{rec,play,out}_{ss,map} are more intuitive and also resemble to the
parameter names known from run(). Both rec_{ss,map} and out_{ss,map} are
initialized as we knew it from source_{ss,map} before being passed to
init(). The previous EC implementations only require trivial changes,
i.e., setting rec_{ss,map} to out_{ss,map} at the end of init() in case
that out_{ss,map} is modified in init().
When the play stream from the EC sink has not enough data available then
the EC implementation is currently bypassed by directly forwarding the
record bytes to the EC source. Since EC implementations maintain their
own buffers and cause certain latencies, a bypass leads to glitches as
the out stream stream jumps forth and back in time. Furthermore, some
EC implementations may also apply noise reduction or other sound
enhancing techniques, which are therefore bypassed, too.
Fix this by passing silence bytes to the EC implementation if the play
stream runs empty. Hence, this patch keeps the EC implementation running
even if the play stream has no data available.
The echo canceller module can pass arguments to the EC implementation
via the module parameter aec_args. However, the echo-cancel-test passes
EC arguments via a separate argv[] option, which is inconsistent. Fix
this.
Initialize the variable to zero by using pa_xnew0() instead of
pa_xnew(). This also allows us to remove a bunch of other zero
initialization statements.
Reported-by: Peter Meerwald <p.meerwald@bct-electronic.com>
bug probably caused by alignment requirement; sizeof(a->w) is a pointer, sizeof(a->w_arr) is an array
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
computes EC block size in frames (rounded down to nearest power-of-2) based
on sample rate and milliseconds
move code from speex AEC implementation to module-echo-cancel such that
functionality can be reused by other AEC implementations
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
The new null implementation works with arbitrary sample specs for source
and sink. In particular, it handles a different number of channels for
source and sink.
Signed-off-by: Stefan Huber <s.huber@bct-electronic.com>
Acked-by: Peter Meerwald <p.meerwald@bct-electronic.com>
In order to support different blocksizes for source and sink (e.g, for
4-to-1 beamforming/echo canceling which involves 4 record channels and 1
playback channel) the AEC API is altered:
The blocksize for source and sink may differ (due to different sample
specs) but the number of frames that are processed in one invokation of
the AEC implementation's run() function is the same for the playback and
the record stream. Consequently, the AEC implementation's init()
function initalizes 'nframes' instead of 'blocksize' and the source's
and sink's blocksizes are derived from 'nframes'. The old API also
caused code duplication in each AEC implementation's init function for
the compution of the blocksize, which is eliminated by the new API.
Signed-off-by: Stefan Huber <s.huber@bct-electronic.com>
Acked-by: Peter Meerwald <p.meerwald@bct-electronic.com>
In case that source and sink use different sample specs (e.g., different
number of channels) the computation of the latency difference fails.
To fix this, we obtain the corresponding latencies in terms of time using
the respective sample specs instead of buffer sizes.
Signed-off-by: Stefan Huber <s.huber@bct-electronic.com>
Acked-by: Peter Meerwald <p.meerwald@bct-electronic.com>
In main() of echo-cancel-test it is wrongly assumed that the EC
implementation's init() function properly initializes sink_ss. In
contrast, pa__init() sets sink_ss by default to
sink_master->sample_spec. Fix this by setting sink_ss to default
parameters and let EC implementation's init() override these settings.
Signed-off-by: Stefan Huber <s.huber@bct-electronic.com>
Acked-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Argument argv[5] is accessed when argc>4, which leads to an invalid
access for argc==5. Fix this.
Signed-off-by: Stefan Huber <s.huber@bct-electronic.com>
Acked-by: Peter Meerwald <p.meerwald@bct-electronic.com>
memcpy() of the null implementation's run() copied data for only one
channel. Set the number of channels to 1 in init() in order to guarantee
this.
Signed-off-by: Stefan Huber <s.huber@bct-electronic.com>
Acked-by: Peter Meerwald <p.meerwald@bct-electronic.com>
apply_diff_time() fails when dropping bytes from the playback stream
and the sample spec of sink and source differ as source's sample spec is
used. Fix this by using sink's sample spec.
Signed-off-by: Stefan Huber <s.huber@bct-electronic.com>
Acked-by: Peter Meerwald <p.meerwald@bct-electronic.com>
CXX libwebrtc_util_la-webrtc.lo
modules/echo-cancel/webrtc.cc: In function 'pa_bool_t pa_webrtc_ec_init(pa_core*, pa_echo_canceller*, pa_sample_spec*, pa_channel_map*, pa_sample_spec*, pa_channel_map*, uint32_t*, const char*)':
modules/echo-cancel/webrtc.cc:196:9: warning: 'rm' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
makes the Adrian echo canceller implementation optional at compile time
this patch supersedes an earlier patch proposal and addresses the following
comments:
* separate patch from speex dependency rework (Arun)
* check that at least one EC implementation is available (Arun)
* properly align yes/no in configure summary for Adrian (Frederic)
make speex library dependency optional, this affects the resampler
and the echo canceller module
this patch supersedes an earlier patch proposal and addresses the following
comments:
* fix order of pa_echo_canceller_method_t enum and ec_table (Frederic)
* the default resampler is speex if available as before, otherwise ffmpeg (Arun)
* does not touch the Adrian EC implementation (see separate patch) (Arun)
When autoloaded, it is expected that module-filter-apply (or whatever is
loading us) will take care of applying the filter on the correct
sink/source master. Instead of adding complexity by tracking what is
currently being filtered, we just disallow filtering anything except the
original master sink/source and let module-filter-apply or whatever is
loading us deal with dynamic sink/source changes.
This makes what devices are being cancelled clearer in the UI (at the
cost of being somewhat less clear when multiple devices of the same name
are plugged, but at least that's a much smaller set than everyone).
