The functions that call attach()/detach() for all streams on a sink or
source didn't update the "attached" flag accordingly. Since the flag is
only used in assertions, this omission didn't cause any harm in normal
use.
The "attached" flag is only used for asserting that the stream is in the
expected state when attaching or detaching.
Sometimes the flag was checked and updated before calling the attach or
detach callback, and sometimes after. I think it makes more sense to
always check it before calling the callback.
At the time the "unlink post" hook is fired, the stream is not any more
connected to its old device, so it makes sense to reset the sink/source
pointer to NULL before firing the hook. If this is not done, the pointer
may become stale during the "unlink post" hook, because
module-bluetooth-policy does a card profile change in its "unlink post"
callback, so even if the pointer is valid when module-bluetooth-policy's
callback is called, it will be invalid in subsequent callbacks.
In the "unlink post" hook it's not guaranteed that the stream's old
device exists any more, so let's use the "unlink" hook that is safer.
For example, module-bluetooth-policy does a card profile change in the
source-output "unlink post" hook, which invalidates the source-output's
source pointer.
When the "unlink" hook is fired, the stream is still linked to its
device, which affects the return values of the check_suspend()
functions. The unlinked streams should be ignored by the check_suspend()
functions, so I had to add extra parameters to those functions.
Bug 96741 shows a case where an assertion is hit, because
pa_asyncq_new() failed due to running out of file descriptors.
pa_asyncq_new() is used in only one place (not counting the call in
asyncq-test): pa_asyncmsgq_new(). Now pa_asyncmsgq_new() can fail too,
which requires error handling in many places. One of those places is
pa_thread_mq_init(), which can now fail too, and that needs additional
error handling in many more places. Luckily there weren't any places
where adding better error handling wouldn't have been easy, so there are
many changes in this patch, but they are not complicated.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=96741
When unloading a module, lt_dlclose() may remove the module from memory.
If a module unloads itself, it's not safe to call lt_dlclose()
synchronously from pa_module_unload(), because the execution may return
to the module code that was removed from memory. To avoid this
situation, let's postpone lt_dlclose() until it's safe to call it.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=96831
Although such 9.0 clients support memfd transport, they have an
iochannel bug that would break memfd audio if they're run in 32
bit mode over a 64-bit kernel. Influence them to use the POSIX
shared memory model instead.
Also bump the protocol version to exclusively mark such v9.0
libraries. Check commit 451d1d6762 for further details.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=97769
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Users reported audio breakage for 32-bit pulse clients connected
to a 64-bit server over memfds. Investigating the issue further,
the problem is twofold:
1. iochannel's file-descriptor passing code is liberal in what it
issues: produced ancillary data object's "data" section exceeds
length field. How such an extra space is handled is a grey area
in the POSIX.1g spec, the IETF RFC #2292 "Advanced Sockets API
for IPv6" memo, and the cmsg(3) manpage.
2. A 64-bit kernel handling of such extra space differs by whether
the app is 64-bit or 32-bit. For 64-bit apps, the kernel
smartly ducks the issue. For 32-bit apps, an -EINVAL is
directly returned; that's due to a kernel CMSG header traversal
bug in the networking stack "32-bit sockets emulation layer".
Compare Linux Kernel's socket.h cmsg_nxthdr() code and the
32-bit emulation layer version of it at net/compat.c
cmsg_compat_nxthdr() for further info. Notice how the former
graciously ignores incomplete CMSGs while the latter _directly_
complains about them -- as of kernel version 4.9-rc5.
(A kernel patch is to be submitted)
Details:
iochannel typically uses sendmsg() for passing FDs & credentials.
>From RFC 2292, sendmsg() control data is just a heterogeneous
array of embedded ancillary objects that can differ in length.
Linguistically, a "control message" is an ancillary data object.
For example, below is a sendmsg() "msg_control" containing two
ancillary objects:
|<---------------------- msg_controllen---------------------->|
| |
|<--- ancillary data object -->|<----- ancillary data object->|
|<------- CMSG_SPACE() ------->|<------- CMSG_SPACE() ------->|
| | |
|<-------- cmsg_len ------->| |<-------- cmsg_len ------->| |
|<------- CMSG_LEN() ------>| |<------- CMSG_LEN() ------>| |
| | | | |
+-----+-----+-----+--+------+--+-----+-----+-----+--+------+--+
|cmsg_|cmsg_|cmsg_|XX|cmsg_ |XX|cmsg_|cmsg_|cmsg_|XX|cmsg_ |XX|
|len |level|type |XX|data[]|XX|len |level|type |XX|data[]|XX|
+-----+-----+-----+--+------+--+-----+-----+-----+--+----+-+--+
^^^^^^^ Ancil Object #1 ^^^^^^^ Ancil Object #2
(control message) (control message)
^
|
+--- sendmsg() "msg_control" points here
Problem is, while passing FDs, iochannel's code try to avoid
variable-length arrays by creating a single cmsg object that can
fit as much FDs as possible:
union {
struct cmsghdr hdr;
uint8_t data[CMSG_SPACE(sizeof(int) * MAX_ANCIL_DATA_FDS)];
} cmsg; ^^^^^^^^^^^^^^^^^^
Most of the time though the number of FDs to be passed is less
than the maximum above, thus "cmsg_len" is set to the _actual_ FD
array size:
cmsg.hdr.cmsg_len = CMSG_LEN(sizeof(int) * nfd);
^^^
This inconsistency tricks the kernel into thinking that we have 2
ancillay data objects instead of one! First cmsg is valid as
intended, but the second is instantly _corrupt_ since it has a
cmsg_len size of 0 -- thus failing kernel's CMSG_OK() tests.
For 32-bit apps on a 32-bit kernel, and 64-bit apps over a 64-bit
one, the kernel's own CMSG header traversal macros just ignore the
second "incomplete" cmsg. For 32-bit apps over a 64-bit kernel
though, the kernel 32-bit socket emulation macros does not forgive
such incompleteness and directly complains of invalid args (due to
a subtle bug).
Avoid this ugly problem, which can also bite us in a pure 64-bit
environment if MAX_ANCIL_DATA_FDS got extended to 5 FDs, by
setting "cmsg_data[]" array size to "cmsg_len".
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=97769
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
PA_PAGE_SIZE using sysconf() may return a negative number
CID 1137925, CID 1137926, CID 1138485
instead of calling sysconf() directly, add function pa_page_size()
which uses the guestimate 4096 in case sysconf(_SC_PAGE_SIZE) fails
using PA_ONCE to only evaluate sysconf() once
pa_ncpu() is supposed to report the number of processors available on
the system. For that, it currently calls sysconf(_SC_NPROCESSORS_CONF).
However, since the operating system can disable individual processors,
we should call sysconf(_SC_NPROCESSORS_ONLN) to determine the number
of processors currently available [1]. Consequently, the once-test will
fail since pthread_setaffinity_np() is called with CPUs that are
currently not available.
It might also be advisable to change the code in the future to use CPU
sets on Linux as even the suggested change is not 100% safe but at least
it improves over the existing code. If PulseAudio was to be run in a CPU
set [2], the number of processors available to PulseAudio could be even
less than the number of CPUs currently online (_SC_NPROCESSORS_CONF).
[1] https://www.gnu.org/software/libc/manual/html_node/Processor-Resources.html
[2] http://man7.org/linux/man-pages/man7/cpuset.7.html
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=96809
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Doesn't really affect logic, but Coverity reports this as dead-code, and
I figure it makes sense to be consistent about our use of HAVE_MEMFD.
CID: 1352045
It was a very confusing state variable that required a lot of
fiddling. It was also redundant in that it can be computed from
the other variables, removing any risk of it getting out of sync.
In the same spirit, make sure "requested" also always contains a
sane value, even though it may not be used by every caller.
Having it handled in the callers proved to be a poor fit as it
became difficult to handle a shrinking minreq sanely. It could end
up in a state where the request was never sent downstream to the
client.
The behaviour is to leave the value unchanged. The idea is to init the value
with a default before the call and not treat a missing value as error. That
way, only parsing errors or validating errors actually return error codes.
I want module-alsa-card to set the availability of unavailable
profiles before the initial card profile gets selected, so that the
selection logic can use correct availability information.
module-alsa-card initializes the jack state after calling
pa_card_new(), however, and the profile selection happens in
pa_card_new(). This patch solves that by moving parts of pa_card_new()
to pa_card_choose_initial_profile() and pa_card_put().
pa_card_choose_initial_profile() applies the profile selection policy,
so module-alsa-card can first call pa_card_new(), then initialize the
jack state, and then call pa_card_choose_initial_profile(). After that
module-alsa-card can still override the profile selection policy, in
case module-alsa-card was loaded with the "profile" argument. Finally,
pa_card_put() finalizes the card creation.
An alternative solution would have been to move the jack
initialization to happen before pa_card_new() and use pa_card_new_data
instead of pa_card in the jack initialization code, but I disliked
that idea (I want to get rid of the "new data" pattern eventually).
The order in which the initial profile policy is applied is reversed
in this patch. Previously the first one to set it won, now the last
one to set it wins. I think this is better, because if you have N
parties that want to set the profile, we avoid checking N times
whether someone else has already set the profile.
There is currently no use for allowing modules to cancel card creation,
and I don't see need for that in the future either. Let's simplify
things by removing the failure handling code.
This allows us to parse an extra set of modargs to tack on to an
existing set. Duplicates in the second set are ignored, since this fits
our use best. In the future, this could be extended to support different
merge modes (ignore dupes vs. replace with dupes), but I've left this
out since there isn't a clear need and it would be dead code for now.
Renamed all variables pertaining to latency offsets of sinks and sources,
calling them "port_latency_offset" or similar instead. All of these variables
refer to latency offsets inherited from ports, rather than being unique to
the sinks or sources themselves.
This change is to pave the way for additional functionality for setting
latency offsets on sources and sinks independenly from the value they inherit
from their port. In order to implement them we first need this rename so that
the two latency offsets can be stored individually and summed when reporting
the total latency of the source or sink.
The renames made are:
pa_sink_set_latency_offset() -> pa_sink_set_port_latency_offset()
pa_source_set_latency_offset() -> pa_source_set_port_latency_offset()
sink->latency_offset -> sink->port_latency_offset
sink->thread_info.latency_offset -> sink->thread_info.port_latency_offset
source->latency_offset -> source->port_latency_offset
source->thread_info.latency_offset -> source->thread_info.port_latency_offset
PA_SINK_MESSAGE_SET_LATENCY_OFFSET -> PA_SINK_MESSAGE_SET_PORT_LATENCY_OFFSET
PA_SOURCE_MESSAGE_SET_LATENCY_OFFSET -> PA_SOURCE_MESSAGE_SET_PORT_LATENCY_OFFSET
Unlike pa_sink_set_port(), which calls pa_sink_set_latency_offset() to update
the latency offset of the sink to match that of its newly set port,
pa_source_set_port() did not do so. This patch adds the appropriate call to
pa_source_set_latency_offset() in pa_source_set_port() to fix this.
Sink(-input) and source(-output) called unlink function when reference
count dropped to zero. This would result in unlink hooks being called
with an object having a reference count of zero, and this is not a
situation we want modules to have to deal with. It is better to just
remove the redundant unlinking code from sink(-input) and
source(-output) and assert on reference count in unlink functions as well.
It is expected that in well behaving code the owner of an object will
always unlink the object before unreferencing.
Signed-off-by: Arun Raghavan <arun@arunraghavan.net>
While investigating bug 95352, I noticed that
pa_pstream_set_revoke_callback() and pa_pstream_set_release_callback()
were identical - both set the release callback.
pa_pstream_set_revoke_callback() was obviously broken - it was setting
the wrong callback.
The only place where set_revoke_callback() is called is in
protocol-native.c. The code there looks like this:
pa_pstream_set_revoke_callback(c->pstream, pstream_revoke_callback, c);
pa_pstream_set_release_callback(c->pstream, pstream_release_callback, c);
Since set_release_callback() is called last, the release callback gets
set correctly. The only problem is that the revoke callback stays
unset. What are the consequences of that? The code that calls the
revoke callback looks like this:
if (p->revoke_callback)
p->revoke_callback(p, block_id, p->revoke_callback_userdata);
else
pa_pstream_send_revoke(p, block_id);
So the intended callback is replaced with a pa_pstream_send_revoke()
call. What does the intended callback, that doesn't get called, do?
if (!(q = pa_thread_mq_get()))
pa_pstream_send_revoke(p, block_id);
else
pa_asyncmsgq_post(q->outq, PA_MSGOBJECT(userdata), CONNECTION_MESSAGE_REVOKE, PA_UINT_TO_PTR(block_id), 0, NULL, NULL);
So the native protocol's revoke callback is anyway going to call
pa_pstream_send_revoke() when called from the main thread. If the
revoking is done from an IO thread, an asynchronous message is sent to
the main thread instead, and the message handler will then call
pa_pstream_send_revoke().
In conclusion, the only effect of this bug was that
pa_pstream_send_revoke() was sometimes being called from an IO thread
when it should have been called from the main thread. I don't know if
this caused the crash in bug 95352. Probably not.
As reported by valrgrind
==30002== Conditional jump or move depends on uninitialised value(s)
==30002== at 0x5CB883C: pa_cmsg_ancil_data_close_fds (pstream.c:193)
==30002== by 0x5CBB161: do_write (pstream.c:759)
==30002== by 0x5CB8B51: do_pstream_read_write (pstream.c:233)
==30002== by 0x5CB8EE8: io_callback (pstream.c:279)
...
The pa_cmsg_ancil_data structure has two main guards:
'creds_valid', which implies that it holds credentials
information, and 'nfd', which implies it holds file descriptors.
When code paths create a credentials ancillary data structure,
they just set the 'nfd' guard to zero. Typically, the rest of
pa_cmsg_ancil_data fields related to fds are _all_ left
_uninitialized_.
pa_cmsg_ancil_data_close_fds() has broken the above contract:
it accesses the new 'close_fds_on_cleanup' flag, which is related
to file descriptors, without checking the 'nfd == 0' guard first.
Fix this inconsistency.
Reported-by: Alexander E. Patrakov <patrakov@gmail.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Arun Raghavan <arun@arunraghavan.net>
As shown by valgrind
==10615== Conditional jump or move depends on uninitialised value(s)
==10615== at 0x5CC0483: shm_marker_size (shm.c:97)
==10615== by 0x5CC1685: shm_attach (shm.c:381)
==10615== by 0x5CC1990: pa_shm_cleanup (shm.c:453)
==10615== by 0x5CC068E: sharedmem_create (shm.c:150)
...
Solution is to fix the shm_marker_size() signature itself: At
certain code paths like shm_attach(), we don't want to initialize
_any_ field in the passed SHM segment descriptor except after
making sure all error exit conditions have been passed.
Reported-by: Alexander E. Patrakov <patrakov@gmail.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Arun Raghavan <arun@arunraghavan.net>
Fix memory leak in pa_resampler_new() in resampler.c, Deallocating
memory of r->lfe_filter in case of fail.
Signed-off-by: Arun Raghavan <arun@arunraghavan.net>
The current LFE crossover filter removes low frequencies from the main
channels and puts them into the LFE channel with the wrong amplitude.
It is not known for sure what is the correct relative amplitude (acoustic
measurements are required with real hardware), and changing that might
introduce a new bug, "it clips the LFE channel".
So just disable the feature by default until a better understanding
emerges how it should work. This, essentially, returns the defaults
to their state as of PulseAudio 6.0.
Some more observations:
- Most of available active analog speakers on the market do the
necessary crossover filtering already, and HDMI receivers can be
configured to do that, too, so a crossover filter in PulseAudio is
harmful in these use cases.
- The "laptop with a builtin subwoofer" use case requires manual
configuration anyway because the default crossover frequency (120 Hz) is
wrong for laptop speakers.
- Finally, Windows 10 with a built-in USB audio driver does not synthesize
the LFE channel given a 5.1 card and a stereo audio stream by default.
Hides: https://bugs.freedesktop.org/show_bug.cgi?id=95021
Signed-off-by: Alexander E. Patrakov <patrakov@gmail.com>
ffmpeg_data was not freed properly before return due to error.
It is now freed properly.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=95347
Signed-off-by: Sachin Kumar Chauhan <sachin.kc@samsung.com>
Signed-off-by: Arun Raghavan <arun@arunraghavan.net>
This is needed so we don't keep stale jack availability information
while the card is suspended.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=93259
Signed-off-by: Arun Raghavan <arun@arunraghavan.net>
I will modify module-switch-on-port-available so that it will keep
track of which input and output port the user prefers on the card,
based on the user's profile and port switches. The preference needs
to be saved on disk, for which I will use module-card-restore.
To facilitate communication between the two modules, this patch adds
preferred_input_port and preferred_output_port fields to pa_card, and
a hook for monitoring the variable changes. It would be nice if the
two modules would communicate directly with each other, but
implementing that would be somewhat complicated, so I chose this time
for adding the functionality to the core. In theory some other routing
module might want to manage the new variables instead of
module-switch-on-port-available, but admittedly that's not very likely
to happen...
Now that all layers in the stack support memfd blocks, add memfd
support for the daemon's global core mempool. Also introduce
"enable-memfd=" daemon argument and configuration option.
For now, memfd support is an opt-in feature to be activated only
when daemon's enable-memfd= is set to yes.
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Now that all layers in the stack support memfd blocks, add memfd
pools support for client context and audio playback data.
Use such memfd pools by default only if the server signals memfd
support in its connection negotiations.
Also add ability for clients to force-disable memfd transport
through the `enable-memfd=' client configuration option.
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
pa_sink_input_update_proplist() is inconvenient in many cases, because
it requires allocating a new proplist, even if the goal is to just set
one property. pa_sink_input_update_properties also can't properly log
property changes, because it has to assume that all values are
arbitrary binary data.
This patch adds pa_sink_input_set_property() for setting a string
value for a single property, and pa_sink_input_set_property_arbitrary()
for setting a binary value for a single property.
pa_sink_input_update_properties() is reimplemented as a wrapper around
pa_sink_input_set_property_arbitrary() to centralize logging and
sending change notifications.
(The above mentions only sink input functions for brevity, but the
same changes are implemented for source outputs too.)
Before a device is unlinked, the unlink hook is fired, and it's
possible that a routing module tries to move streams to the unlinked
device in that hook, because it doesn't know that the device is being
unlinked. Of course, the unlinking is obvious when the code is in an
unlink hook callback, but it's possible that some other module does
something in the unlink hook that in turn triggers some other hook,
and it's this second hook where the routing module may get confused.
This patch adds an "unlink_requested" flag that is set before the
unlink hook is fired, and moving streams to a device with that flag
set is prevented.
This patch is motivated by seeing module-device-manager moving a
stream to a sink that was being unlinked. It was a complex case where
an alsa card was changing its profile, while an echo-cancel sink was
connected to the old alsa sink. module-always-sink loaded a null sink
in the middle of the profile change, and after a stream had been
rescued to the null sink, module-device-manager decided to move it
back to the old alsa sink that was being unlinked. That move made no
sense, so I came up with this patch.
srbchannel needs fd passing. Otherwise we get the following error
for systems without SCM_CREDENTIALS support:
Code should not be reached at pulsecore/pstream-util.c:95,
function pa_pstream_send_tagstruct_with_fds(). Aborting.
[[ The root cause is that we define HAVE_CREDS only if
SCM_CREDENTIALS is defined, but SCM_CREDENTIALS is a Linux-specific
symbol. Thus HAVE_CREDS is always disabled on Solaris.
And since pulse couples the non-portable creds passing support
with the portable fd passing one, through _35_ places where
HAVE_CREDS is used, a real fix needs a PA redesign -- assuming that
latency on Solaris is something people care about. ]]
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=94339
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
