This breaks a lot of headsets, so disabling by default. Can be
re-enabled in configuration for specific hardware where it is deemed
necessary.
Also added some debug logging to be able to examine what MTU size is
reported by the device.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=102660
There are actually two HSP HS UUIDs. My theory is that the second one
was added, because someone was not happy with the old UUID being used
for identifying two different things (the HSP profile as a whole, and
the HS role within the HSP profile). Some headsets only use the new
UUID, and those headsets won't work if we don't recognize the new UUID.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=93898
The function can only fail if there's not enough memory available, and
if that happens, the convention in PulseAudio is to abort.
CID: 1353106, 1353108, 1353140
This patch changes the behavior of the headset=auto switch for module-bluez5-discover.
With headset=auto now both backends will be active at the same time for the AG role and
the switching between the backends is only done for the HS role.
headset=ofono and headset=native remain unchanged.
This allows to use old HSP only headsets while running ofono and to have headset support
via pulseaudio if ofono is started with the --noplugin=hfp_ag_bluez5 option.
This is a rebase of Wim Taymans patch to support the HSP headset role that has
somehow been forgotten. Original patch can be found at
https://lists.freedesktop.org/archives/pulseaudio-discuss/2015-February/023242.html
Rebase and minor changes by Georg Chini.
In addition to the HSP Audio Gateway, also add support for the headset
role in the native bluetooth backend. In this role, pulseaudio is used as
headset.
In the headset role, we create source and sink to receive and send the samples
from the gateway, respectively. Module-bluetooth-policy will automatically load
loopback modules to link these to a sink and source for playback. Because this
makes the source the speaker and the sink the microphone, we need to reverse the
roles of source and sink compared to the gateway role.
In the gateway role, adjusting the sink volume generates a +VGS command to set
the volume on the headset. Likewise, receiving AT+VGS updates the sink volume.
In the headset role, receiving a +VGS should set the source volume and any
source volume changes should be reported back to the gateway with AT+VGS.
A recent patch changed the MTU size from the default value of 48 to the value
returned by getsockopt(). This breaks HSP for some setups. To circumvent the
problem, this patch introduces a boolean parameter "autodetect_mtu" for
module-bluetooth-discover, module-bluez5-discover and module-bluez5-device to
make this use of getsockopt() configurable.
Issue: When HFP/HSP profile is used with certain BT chipsets, the
audio sounds heavily distorted, with very slow playback full of noise.
During recording, the samples are dropped and it distorts the recorded
audio samples.
The root cause of both the issues are related to the fixed MTU sizes
in the PA stack, which is 48 bytes. Here, the BT chipset CC256x had
180 bytes MTU and it was being under-utilized and the rate at which
the samples were being accepted where not matching the expected rate,
and hence the distortion.
Solution: The appropriate solution to this problem is by reading the
MTU size of the SCO socket using getsockopts dynamically.
BugLink: http://bit.ly/2gDpGPv
BugLink: http://bit.ly/2hQsARK
FSF addresses used in PA sources are no longer valid and rpmlint
generates numerous warnings during packaging because of this.
This patch changes all FSF addresses to FSF web page according to
the GPL how-to: https://www.gnu.org/licenses/gpl-howto.en.html
Done automatically by sed-ing through sources.
Send the right command to set the speaker and microphone gain.
Note that setting the volume on the Headset should use the unsolicited
result code. Receiving the volume from the Headset uses the AT
command.
supresses a warning when compiling with NDEBUG:
pulsecore/aupdate.c: In function 'pa_aupdate_read_end':
pulsecore/aupdate.c:82:14: warning: variable 'n' set but not used [-Wunused-but-set-variable]
unsigned n;
pulsecore/sink-input.c: In function 'pa_sink_input_unlink':
pulsecore/sink-input.c:648:27: warning: variable 'p' set but not used [-Wunused-but-set-variable]
pa_source_output *o, *p = NULL;
pulsecore/sink-input.c: In function 'find_filter_sink_input':
pulsecore/sink-input.c:1523:14: warning: unused variable 'i' [-Wunused-variable]
unsigned i = 0;
pulsecore/sink-input.c: In function 'pa_sink_input_start_move':
pulsecore/sink-input.c:1569:27: warning: variable 'p' set but not used [-Wunused-but-set-variable]
pa_source_output *o, *p = NULL;
CC pulsecore/libpulsecore_5.0_la-sink.lo
pulsecore/sink.c: In function 'pa_sink_unlink':
pulsecore/sink.c:673:24: warning: variable 'j' set but not used [-Wunused-but-set-variable]
pa_sink_input *i, *j = NULL;
pulsecore/source-output.c: In function 'find_filter_source_output':
pulsecore/source-output.c:1179:9: warning: unused variable 'i' [-Wunused-variable]
int i = 0;
CC pulsecore/libpulsecore_5.0_la-source.lo
pulsecore/source.c: In function 'pa_source_unlink':
pulsecore/source.c:616:27: warning: variable 'j' set but not used [-Wunused-but-set-variable]
pa_source_output *o, *j = NULL;
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Enable both ofono and native backends to be built into the same
libbluez5-util. Never build the null backend.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
We weren't writing out one character from the "OK" response, and the
"AT" part of the "+VGS" and "+VGM" commands was missing. Also, the spec
says that the command is terminated by only a CR and not an LF (probably
doesn't hurt, but let's adhere to the spec for now).
Parse the gain changed AT commands from the headset and fire 2 new
hooks as a result. The device will connect to those hooks and change the
source/sink volumes.
When the source/sink volume changes, set the gain on the microphone or
speaker respectively. Make sure we do nothing if the transport can not
handle the gain changes.
Add a simple native headset backend that implements support for the
blutooth HSP profile.
This allows pulseaudio to output audio to a Headset using the HSP profile.
Make the native backend the default.
