Some sink flags are really just a product of what callbacks
are set on the device. We still enforce a degree of sanity
that the flags match the callbacks set, but we also set the
flags automatically in our callback setter functions to
help ensure that a) people use them and b) flags & callbacks
are kept in sync.
This is not currently useful but future commits will make further
changes concerning automatic setting of flags and event delivery
that makes this structure necessary.
This piggy backs onto the previous changes for protocol 22 and
thus does not bump the version. This and the previous commits should be
seen as mostly atomic. Apologies for any bisecting issues this causes
(although I would expect these to be minimal)
Since we currently have two mechanisms to signal a passthrough
connection (non-PCM format or PA_SINK_INPUT_PASSTHROUGH flag), we move
all the related checks into functions and use those everywhere.
This makes things more consistent, and should we decide to get rid of
the flag, we only need to change pa_sink_input_*_is_passthrough()
accordingly.
This will eventually be replaced by a hook to let clients know that the
stream has moved so that they can gracefully reconnect and renegotiate a
supported format.
This removes the passthrough flag from sinks since we will drop
exclusively passthrough sinks in favour of providing a list of formats
supported by each sink. We can still determine whether a sink is in
passthrough mode by checking if any non-PCM streams are attached to it.
This adds a get_formats() vfunc for sinks to provide a list of formats
they can support. pa_sink_check_formats() can be used during or after
routing to determine what formats from a stream the sink can support.
When we have a filter sink that does some processing, currently the
benefits of the flat volume feature are not really available. That's
because if you have a music player that is connected to the filter sink,
the hardware sink doesn't have any idea of the music player's stream
volume.
This problem is solved by this "volume sharing" feature. The volume
sharing feature works so that the filter sinks that want to avoid the
previously described problem declare that they don't want to have
independent volume, but they follow the master sink volume instead.
The PA_SINK_SHARE_VOLUME_WITH_MASTER sink flag is used for that
declaration. Then the volume logic is changed so that the hardware
sink calculates its real volume using also the streams connected to the
filter sink in addition to the streams that are connected directly to
the hardware sink. Basically we're trying to create an illusion that
from volume point of view all streams are connected directly to the
hardware sink.
For that illusion to work, the volumes of the filter sinks and their
virtual streams have to be managed carefully according to a set of
rules:
If a filter sink follows the hardware sink volume, then the filter sink's
* reference_volume always equals the hw sink's reference_volume
* real_volume always equals the hw sink's real_volume
* soft_volume is always 0dB (ie. no soft volume)
If a filter sink doesn't follow the hardware sink volume, then the filter
sink's
* reference_volume can be whatever (completely independent from the hw sink)
* real_volume always equals reference_volume
* soft_volume always equals real_volume (and reference_volume)
If a filter sink follows the hardware sink volume, and the hardware sink
supports flat volume, then the filter sink's virtual stream's
* volume always equals the hw sink's real_volume
* reference_ratio is calculated normally from the stream volume and the hw
sink's reference_volume
* real_ratio always equals 0dB (follows from the first point)
* soft_volume always equals volume_factor (follows from the previous point)
If a filter sink follows the hardware sink volume, and the hardware sink
doesn't support flat volume, then the filter sink's virtual stream's
* volume is always 0dB
* reference_ratio is always 0dB
* real_ratio is always 0dB
* soft_volume always equals volume_factor
If a filter sink doesn't follow the hardware sink volume, then the filter
sink's virtual stream is handled as a regular stream.
Since the volumes of the virtual streams are controlled by a set of rules,
the user is not allowed to change the virtual streams' volumes. It would
probably also make sense to forbid changing the filter sinks' volume, but
that's not strictly necessary, and currently changing a filter sink's volume
changes actually the hardware sink's volume, and from there it propagates to
all filter sinks ("funny" effects are expected when adjusting a single
channel in cases where all sinks don't have the same channel maps).
This patch is based on the work of Marc-André Lureau, who did the
initial implementation for Pulseaudio 0.9.15.
This allows modules to know when certain ports are changed.
This will allow e.g. a filter module (or LADSAP) to only load
when a certain port is used on the device (e.g. to only filter
headphones and not normal speakers).
(Comment from Colin Guthrie: This may also have use in UCM)
This change doesn't add any functionality in itself, but it will be useful in
the future for operating on chains of sinks or sources that are piggy-backing
on each other.
For example, the PA_PROP_DEVICE_MASTER_DEVICE property could
be handled in the core so that each virtual device doesn't have to maintain it
separately. By using the origin_sink and destination_source pointers the core
is able to see at stream creation time that the stream is created by a virtual
device, and then update that device's property list using the name of the
master device that the stream is being connected to. The same thing can be done
also when the stream is being moved from a device to another, in which case the
_MASTER_DEVICE property needs updating.
When logging a suppression message do so on the same log level as the
suppressed messages.
Cherry picked by Colin Guthrie from ec5a785712
with a couple of additional changes due to extra limiting in master
that was not present in stable-queue.
To make concurrent use of SW and HW volume glitchles their application
needs to be synchronized. For accurate synchronization the HW volume
needs to be applied in IO thread. This patch adds infrastructure to
delay the applying of HW volume to match with SW volume timing. To
avoid synchronization problems this patch moves many of the volume and
mute related functions from main thread to IO thread. All these
changes become active only if the sync volume flag for a sink has been
set. So, for this patch to have any effect it needs to be taken into
use by sink implementor.
Signed-off-by: Jyri Sarha <jyri.sarha@nokia.com>
Reviewed-by: Tanu Kaskinen <tanu.kaskinen@digia.com>
Reviewd-by: Colin Guthrie <cguthrie@mandriva.org>
When looping through the streams on a given device checking to see if the
stream is 'active' there should be no assert if the stream is not linked, it
should simply be ignored.
This assert can be hit if a sink and a sink input are both created and setup
but the final put calls are left to the end as is done in module-ladspa-sink.
While the order of the calls in module-ladspa-sink could be altered, we should
deal gracefully with the way it is now and not complain about ending up
in this state.
A trigger case was trivial:
1. Load a ladspa-sink.
2. Play a stream and move it to it.
3. Unload the module, then reload it.
4. Due to module-stream-restore and module-suspend-on-idle, the hook callbacks
will ultimately hit this assert.
Thanks to Kim Therkelsen for highlighting this issue.
Second version after Tanu's feedback
TODO:
- notify client that volume control is disabled
- change sink rate in passthrough mode if needed
- automatic detection of passthrough mode instead of hard
coded profile names
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Instead of using string contents for type identification use the address
of a constant string array. This should speed up type verifications a
little sind we only need to compare one machine word instead of a full
string. Also, this saves a few strings.
To make clear that types must be compared via address and not string
contents 'type_name' is now called 'type_id'.
This also simplifies the macros for declaring and defining public and
private subclasses.
- We now implement a logic where the sink maintains two distinct
volumes: the 'reference' volume which is shown to the users, and the
'real' volume, which is configured to the hardware. The latter is
configured to the max of all streams. Volume changes on sinks are
propagated back to the streams proportional to the reference volume
change. Volume changes on sink inputs are forwarded to the sink by
'pushing' the volume if necessary.
This renames the old 'virtual_volume' to 'real_volume'. The
'reference_volume' is now the one exposed to users.
By this logic the sink volume visible to the user, will always be the
"upper" boundary for everything that is played. Saved/restored stream
volumes are measured relative to this boundary, the factor here is
always < 1.0.
- introduce accuracy for sink volumes, similar to the accuracy we
already have for source volumes.
- other cleanups.
This of course makes the name 'fixed' a bit of a misnomer. However the
definitions are now like this:
fixed latency: the latency may change during runtime, but is solely
controlled by the backend, the client has no influence.
dynamic latency: the latency may change during runtime, influenced by
the requests of the clients.
i.e. fixed vs. dynamic is from the perspective of the client.
