pulsecore/core-util.c: In function ‘pa_hexstr’:
pulsecore/core-util.c:1858: warning: cannot optimize loop, the loop counter may overflow [-Wunsafe-loop-optimizations]
modules/alsa/alsa-mixer.c: In function ‘pa_alsa_decibel_fix_dump’:
modules/alsa/alsa-mixer.c:3678: warning: cannot optimize possibly infinite loops [-Wunsafe-loop-optimizations]
modules/alsa/alsa-mixer.c: In function ‘pa_alsa_path_set_new’:
modules/alsa/alsa-mixer.c:2640: warning: cannot optimize loop, the loop counter may overflow [-Wunsafe-loop-optimizations]
Without this, p->max_dB could never be less than 0 dB, because the loop at the
end of pa_alsa_path_probe() would reset p->max_dB to 0 as soon as the loop
encountered a channel that wasn't touched by any element.
There was a similar issue for p->min_dB too (it could never be more than 0 dB),
which is also fixed by this patch.
This feature is mainly useful in embedded systems that have built-in speakers.
In such situations the full audio path is known beforehand, so it's possible to
know what is the maximum sensible volume, and any higher volume can be
disabled.
The volume limit is set in path configuration files in the [Element] section,
using option "volume-limit". The value is the desired maximum volume step of
the volume element.
It seems git managed to mess up a git-am with a patch from
David which moved where this function was called element_probe
to within itself (recursive which could normally lead to an
infinite loop, but as it was now never called from anywhere else,
this didn't happen).
Thank you to Maarten for spotting and following up the issue.
Make sure that mic and line (with common names) use the specific
path instead of the analog-input one.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Now you can add required-any to elements in a path and the path
will be valid as long as at least one of the elements are present.
Also you can have required, required-any and required-absent in
element options, causing a path to be unsupported if an option is
(not) present (simplified example: to skip line in path if
"Capture source" doesn't have a "Line In" option).
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Add front mic, rear mic, and docking line-in. These are likely to be
present on modern hda chips, for reference see
linux-2.6/sound/pci/hda/hda_codec.c:hda_get_input_pin_label
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
When creating synthesized paths, pa_alsa_path_set_new() created duplicate
elements for each path, and one of the duplicate elements would be marked as
required absent. That made path probing fail. While debugging this, I noticed
also that pa_alsa_path_synthesize() didn't initialize p->last_element properly.
This patch reflects a new capability that Lennart was wishing
for. Wish granted...
Re-submitting it now that alsa-lib 1.0.24
provides additional entry points to disable period
wakeups in timer-scheduling mode if hardware can
work without it (HDAudio, oxygen and Intel SST).
Example with standard playback on HDAudio output
Before change:
Top causes for wakeups:
3.8% ( 5.4) [hda_intel] <interrupt>
2.8% ( 4.0) alsa-sink
After change:
Top causes for wakeups:
2.3% ( 3.0) alsa-sink
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
When logging a suppression message do so on the same log level as the
suppressed messages.
Cherry picked by Colin Guthrie from ec5a785712
with a couple of additional changes due to extra limiting in master
that was not present in stable-queue.
This is needed to better support out of tree builds (including
distcheck) and to ensure the necessary folders are created in the
build tree on configure and also works around an intl-tools bug
(https://bugs.launchpad.net/intltool/+bug/605826)
The Makefile.am's used are minimal (and in some cases completely
blank). At present they do not include anything interesting
with the majority of the real work still done by the monolitic
src/Makefile.am
It may make sense to start splitting out src/Makefile.am into
smaller chunks but this commit makes the minimum changes to address
the issues that result from using make distcheck and other out of
tree builds.
Note: This 'breaks' the ability to type make in e.g. the src/modules
folder and have all of PA rebuilt accordingly (this is because the
static Makefiles previously present just did a "make -C ..") which
was purportedly for use in emacs. But I'm sure there will be a better
and more robust way to configure emacs to do your builds properly if
this behaviour is still desirable.
Currently if sink base volume differs from 0dB and sync-volume is used,
wrong volume values are written to hw. This patch fixes that.
Signed-off-by: Juho Hämäläinen <ext-juho.hamalainen@nokia.com>
BugLink: https://launchpad.net/bugs/680810
Some laptops have 'Internal Mic 1' exposed as an 'Input Source', e.g., Dell
XPSM 1530, so handle these, too.
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
How about this? There are a couple of bugs in sink_write_volume_cb,
by the way. Another patch will be sent once this dB value printing
patch is accepted.
-- 8< --
The PCM handle is already opened with the SND_PCM_NONBLOCK flag.
This additional call is useless.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Currently when rewinding alsa, a fixed value of 256 bytes is used,
which represents 1.33ms @ 48kHz (2ch, 16bit). This is typically fine
and due to DMA constraints we would not want to rewind less than this.
However with more demanding sample specs, (e.g. 8ch 192kHz 32bit)
256 bytes is likely not sufficient, so calculate what 1.33ms would
be and use which ever value is bigger.
Discussed with David Henningsson and Pierre-Louis Bossart here:
http://thread.gmane.org/gmane.comp.audio.pulseaudio.general/7286
Make new defines for the smoother window size and adjust time constants instead
of reusing some unrelated constant.
Increase the smoother window size even more because the bigger it is, the
better. Since we have a 200ms max update interval and the max smoother history
is 64 entries, 10seconds is a good default.
Decrease the smoother adjust time to 1 second. The previous value of 4 seconds
was too much to adapt quickly after a resume.
Use snd_pcm_avail_delay() in pa_alsa_safe_delay() so that we can check the delay
value against the avail value and patch it up when it looks invalid. Only do
this for capture.
Move the code to start the capture and the smoother closer together to improve
smoother accuracy.
Rework things to look more like the alsa sink where the device is started in
only one place.
This allows the name registry to mangle the names of auto-detected sinks and
sources to be unique, which makes it possible to load multiple identical sound
cards using module-udev-detect.
At least for now the module argument can only be passed through
module-alsa-card.
This is added so that module-udev-detect can load multiple module-alsa-card
instances with the same card name - forcing namereg_fail to false allows the
name registry to mangle the card names to be unique.
The smoother is paused when the device is suspended but never resumed on
unsuspend. Pass the paused = FALSE flag to the pa_smoother_reset() call to make
it unpause when unsuspending. This patch improves source timings quite a bit.
Second version after Tanu's feedback
TODO:
- notify client that volume control is disabled
- change sink rate in passthrough mode if needed
- automatic detection of passthrough mode instead of hard
coded profile names
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
