Because debian does not run with the freebsd libc, but rather uses the
GNU one, it chose to not define __FreeBSD__, but rather __FreeBSD_kernel__.
Use the alternative when the functionality tested is for kernel
features, and keep the __FreeBSD__ one when using freebsd libc
headers.
If this patch is applied, debian could drop all the current patches when
importing 6.0 :)
supresses a warning when compiling with NDEBUG:
pulsecore/aupdate.c: In function 'pa_aupdate_read_end':
pulsecore/aupdate.c:82:14: warning: variable 'n' set but not used [-Wunused-but-set-variable]
unsigned n;
pulsecore/sink-input.c: In function 'pa_sink_input_unlink':
pulsecore/sink-input.c:648:27: warning: variable 'p' set but not used [-Wunused-but-set-variable]
pa_source_output *o, *p = NULL;
pulsecore/sink-input.c: In function 'find_filter_sink_input':
pulsecore/sink-input.c:1523:14: warning: unused variable 'i' [-Wunused-variable]
unsigned i = 0;
pulsecore/sink-input.c: In function 'pa_sink_input_start_move':
pulsecore/sink-input.c:1569:27: warning: variable 'p' set but not used [-Wunused-but-set-variable]
pa_source_output *o, *p = NULL;
CC pulsecore/libpulsecore_5.0_la-sink.lo
pulsecore/sink.c: In function 'pa_sink_unlink':
pulsecore/sink.c:673:24: warning: variable 'j' set but not used [-Wunused-but-set-variable]
pa_sink_input *i, *j = NULL;
pulsecore/source-output.c: In function 'find_filter_source_output':
pulsecore/source-output.c:1179:9: warning: unused variable 'i' [-Wunused-variable]
int i = 0;
CC pulsecore/libpulsecore_5.0_la-source.lo
pulsecore/source.c: In function 'pa_source_unlink':
pulsecore/source.c:616:27: warning: variable 'j' set but not used [-Wunused-but-set-variable]
pa_source_output *o, *j = NULL;
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
the macro PA_UNUSED may be used to suppress a warning when a variable
is not used, or assigned and never used; this typically happens
when the only use of the variable is within an assert() that can
be optimized away (i.e. with NDEBUG set)
has an effect with GCC only
v2: (thanks to Alexander Patrakov)
* fix patch subject/description
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
fixes many warnings when compiling with NDEBUG, such as
CC pulse/libpulse_la-channelmap.lo
pulse/channelmap.c: In function 'pa_channel_map_init_auto':
pulse/channelmap.c:397:1: warning: control reaches end of non-void function [-Wreturn-type]
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
This adds support to module-native-protocol-unix to take over already
listening sockets passed in via socket activation (e.g. from systemd)
Most of the code is isolated to socket-server but some cleanup code also
had to be tweaked to ensure we do not overzealously close open fds.
We currently use the term SYSTEMD when referring to libsystemd-login
and JOURNAL when referring to libsystemd-journal.
I will be shortly adding support for libsystemd-daemon and in
preparation I figured it would be a good idea to clarify the names
used currently before adding another!
We will just ignore the memblock if this happens. We already have
a check for this in the client library, so this one is just for
security reasons.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Since we don't allow lengths that are not frame aligned,
it does not make sense to allow indices that are not frame aligned
either.
Also, allowing such a thing to be added causes the daemon to crash
later instead (see https://bugs.freedesktop.org/show_bug.cgi?id=77595 ).
Also drop _se from assert (there is no side effect).
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Calling the callback while setting it up can make things
complicated for clients, as the callback can do arbitrarily
things.
In this case, a protocol error caused the srbchannel to be
owned by both the pstream and the native connection.
Now the read callback is deferred, making sure the callback
is called from a cleaner context where errors are handled
appropriately.
Reported-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
The remapper and channel mixing code have (faster) specialized and (slower)
generic code certain code path. The flag force_generic_code can be set to
force the generic code path which is useful for testing. Code duplication
(such as in mix-special-test) can be avoided, cleanup patches follow.
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
New function allows to pass data pointer that is a member
of the outer structure that need to be freed too when data
is not needed anymore.
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Usually, PA will use the PULSE_SERVER X11 property instead of using XDG_RUNTIME_DIR,
so this environment variable does not matter.
If this property is not available, or if one is using the pacmd cli protocol,
the client will go ahead and call pa_make_secure_dir on XDG_RUNTIME_DIR/pulse.
This will either fail (if you're another regular user), or succeed (if you're root).
Both scenarios are bad - failing will cause the connection to fail, and succeeding
is even worse, as it can cause *other* connections to fail (as the directory
ownership has changed).
Instead fail and complain loudly.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=83007
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
building PA with -O0 leads to test failure in mix-test on i386
issue reported by Felipe, see
http://lists.freedesktop.org/archives/pulseaudio-discuss/2014-August/021406.html
the problem is the value 0xbeffbd7f: when byte-swapped it becomes 0x7fbdffbe and according
to IEEE-754 represents a signalling NaN (starting with s111 1111 10, see http://en.wikipedia.org/wiki/NaN)
when this value is assigned to a floating point register, it becomes 0x7ffdffbe, representing
a quiet NaN (starting with s111 1111 11) -- a signalling NaN is turned into a quiet NaN!
so PA_FLOAT32_SWAP(PA_FLOAT32_SWAP(x)) != x for certain values, uhuh!
the following test code can be used; due to volatile, it will always demonstrate the issue;
without volatile, it depends on the optimization level (i386, 32-bit, gcc 4.9):
// snip
static inline float PA_FLOAT32_SWAP(float x) {
union {
float f;
uint32_t u;
} t;
t.f = x;
t.u = bswap_32(t.u);
return t.f;
}
int main() {
unsigned x = 0xbeffbd7f;
volatile float f = PA_FLOAT32_SWAP(*(float *)&x);
printf("%08x %08x %08x %f\n", 0xbeffbd7f, *(unsigned *)&f, bswap_32(*(unsigned *)&f), f);
}
// snip
the problem goes away with optimization when no temporary floating point registers are used
the proposed solution is to avoid passing swapped floating point data in a
float; this is done with new functions PA_READ_FLOAT32RE() and PA_WRITE_FLOAT32RE()
which use uint32_t to dereference a pointer and byte-swap the data, hence no temporary
float variable is used
also delete PA_FLOAT32_TO_LE()/_BE(), not used
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Reported-by: Felipe Sateler <fsateler@debian.org>
Since we don't have "limited" clients, a client that authenticates
correctly is automatically authorized. However, it's the authentication
that can go wrong, rather than the authorization.
Buglink: https://bugs.freedesktop.org/show_bug.cgi?id=78566
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Module-device-restore sets reference_volume, but soft_volume remains at
zero dB, so if a device only has soft_volume (i e no hw volume controls),
its volume was not restored correctly.
Reported-by: Richardo Salveti de Araujo <ricardo.salveti@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
return from setup_srbchannel() when pa_srbchannel_new() fails
pa_srbchannel_new() depends on HAVE_SYS_EVENTFD_H, e.g. Debian/kFreeBSD doesn't
have it
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: David Henningsson <david.henningsson@canonical.com>
pa_fdsem_open_shm() returns NULL when HAVE_SYS_EVENTFD_H is #undefined
pa_srbchannel_new() and pa_srbchannel_new_from_template() depend on
pa_fdsem_open_shm() and shall properly cleanup stuff, and return NULL as well;
otherwise, function pa_fdsem_get() will assert:
Assertion 'f' failed at pulsecore/fdsem.c:284, function pa_fdsem_get(). Aborting.
Debian/kFreeBSD doesn't HAVE_SYS_EVENTFD_H
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: David Henningsson <david.henningsson@canonical.com>
handle both signals on Debian/kFreeBSD, otherwise sigbus-test fails:
Running suite(s): Sig Bus
Let's see if this worked: This is a test that should work fine.
And memtrap says it is good: yes
tests/sigbus-test.c:59:E:sigbus:sigbus_test:0: (after this point) Received signal 11 (Segmentation fault)
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
on systems lacking #defines HAVE_ACCEPT4, HAVE_PIPE2, SOCK_CLOEXEC
pulsecore/core-util.c: In function 'pa_open_cloexec':
pulsecore/core-util.c:3348:1: warning: label 'finish' defined but not used [-Wunused-label]
pulsecore/core-util.c: In function 'pa_socket_cloexec':
pulsecore/core-util.c:3370:1: warning: label 'finish' defined but not used [-Wunused-label]
pulsecore/core-util.c: In function 'pa_pipe_cloexec':
pulsecore/core-util.c:3393:1: warning: label 'finish' defined but not used [-Wunused-label]
pulsecore/core-util.c: In function 'pa_accept_cloexec':
pulsecore/core-util.c:3415:1: warning: label 'finish' defined but not used [-Wunused-label]
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
There was no code that included files from other directories using
the #include "..." style before.
Signed-off-by: Alexander E. Patrakov <patrakov@gmail.com>
This makes it easy to log a message every time the reference ratio
changes. I also need to add a hook for reference ratio changes, but
that need will go away if the stream relative volume controls will be
created by the core in the future.
PA_MAYBE_INT16_SWAP() should call PA_INT16_SWAP(), not PA_INT32_SWAP
PA_MAYBE_INT16_SWAP() is not used (yet), so no big deal :)
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
