strip most comments from the default configuration files, since the man page is now more elaborate and we don't want to maintain those docs redundantly at two places

git-svn-id: file:///home/lennart/svn/public/pulseaudio/trunk@2030 fefdeb5f-60dc-0310-8127-8f9354f1896f

src/daemon/daemon.conf.in

@@ -17,104 +17,38 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
 # USA.
 
-## Configuration file for the pulseaudio daemon. Default values are
+## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
-## commented out.  Use either ; or # for commenting
+## more information. Default values a commented out.  Use either ; or # for
+## commenting.
 
-## Daemonize after startup
 ; daemonize = no
-
-## Quit if startup fails
 ; fail = yes
+; disallow-module-loading = no
+; use-pid-file = yes
+; system-instance = no
+; disable-shm = no
 
-## Renice the daemon to level -15. This a good idea if you experience
-## drop-outs in the playback. However, this is a certain security
-## issue, since it works when called SUID root only. root is dropped
-## immediately after gaining the nice level on startup, thus it is
-## presumably safe.
 ; high-priority = yes
-
-## Try to acquire SCHED_FIFO scheduling for the IO threads. The same
-## security concerns as mentioned above apply. However, if PA enters
-## an endless loop, realtime scheduling causes a system lockup. Thus,
-## realtime scheduling should only be enabled on trusted machines for
-## now. Please not that only the IO threads of PulseAudio are made
-## real-time. The controlling thread is left a normally scheduled
-## thread. Thus the enabling the high-priority option is orthogonal.
-; realtime-scheduling = no
-
-## The realtime priority to acquire, if realtime-scheduling is
-## enabled. (Note: JACK uses 10 by default, 9 for clients -- some
-## PulseAudio threads might choose a priority a little lower or higher
-## than this value.)
-; realtime-priority = 5
-
-## The nice level to acquire for the daemon, if high-priority is
-## enabled. (Note: on some distributions X11 uses -10 by default.)
 ; nice-level = -11
 
-## Disallow module loading after startup
+; realtime-scheduling = no
-; disallow-module-loading = no
+; realtime-priority = 5
 
-## Terminate the daemon after the last client quit and this time
-## passed. Use a negative value to disable this feature.
 ; exit-idle-time = -1
-
-## Unload autoloaded modules after being idle for this time
 ; module-idle-time = 20
-
-## Unload autoloaded sample cache entries after being idle for this time
 ; scache-idle-time = 20
 
-## The path were to look for dynamic shared objects (DSOs aka
-## plugins).  You may specify more than one path seperated by
-## colons.
 ; dl-search-path = @PA_DLSEARCHPATH@
 
-## The default script file to load. Specify an empty string for not
-## loading a default script file. The
 ; default-script-file = @PA_DEFAULT_CONFIG_FILE@
 
-## The default log target. Use either "stderr", "syslog" or
-## "auto". The latter is equivalent to "sylog" in case daemonize is
-## true, otherwise to "stderr".
 ; log-target = auto
-
-# Log level, one of debug, info, notice, warning, error. Log messages
-# with a lower log level than specified here are not logged,
 ; log-level = notice
 
-## The resampling algorithm to use. Use one of src-sinc-best-quality,
-## src-sinc-medium-quality, src-sinc-fastest, src-zero-order-hold,
-## src-linear, trivial, speex-float-N, speex-fixed-N, ffmpeg. See the
-## documentation of libsamplerate for an explanation for the different
-## src- methods. The method 'trivial' is the most basic algorithm
-## implemented. If you're tight on CPU consider using this. On the
-## other hand it has the worst quality of them all. The speex
-## resamplers take an integer quality setting in the range 0..9
-## (bad...good). They exist in two flavours: fixed and float. The
-## former uses fixed point numbers, the latter relies on floating
-## point numbers. On most desktop CPUs the float point resmapler is a
-## lot faster, and it also offers slightly better quality.
 ; resample-method = speex-float-3
 
-## Create a PID file in /tmp/pulseaudio-$USER/pid. Of this is enabled
-## you may use commands like "pulseaudio --kill" or "pulseaudio
-## --check". If you are planning to start more than one pulseaudio
-## process per user, you better disable this option since it
-## effectively disables multiple instances.
-; use-pid-file = yes
-
-## Do not install the CPU load limit, even on platforms where it is
-## supported. This option is useful when debugging/profiling
-## PulseAudio to disable disturbing SIGXCPU signals.
 ; no-cpu-limit = no
 
-## Run the daemon as system-wide instance, requires root priviliges
-; system-instance = no
-
-## Resource limits, see getrlimit(2) for more information. Set to -1
-## if PA shouldn't touch the resource limit. Not all resource limits
-## are available on all operating systems.
 ; rlimit-as = -1
 ; rlimit-core = -1
 ; rlimit-data = -1
@@ -126,14 +60,9 @@
 ; rlimit-nice = 31
 ; rlimit-rtprio = 9
 
-## Disable shared memory data transfer
-; disable-shm = no
-
-## Default sample format
 ; default-sample-format = s16le
 ; default-sample-rate = 44100
 ; default-sample-channels = 2
 
-## Default fragment settings, for device drivers that need this
 ; default-fragments = 4
 ; default-fragment-size-msec = 25

src/pulse/client.conf.in

@@ -17,29 +17,18 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
 # USA.
 
-## Configuration file for pulseaudio clients. Default values are
+## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
-## commented out.  Use either ; or # for commenting
+## more information. Default values a commented out.  Use either ; or # for
+## commenting.
 
-## Path to the pulseaudio daemon to run when autospawning.
+; default-sink =
-; daemon-binary = @PA_BINARY@
-
-## Extra arguments to pass to the pulseaudio daemon
-; extra-arguments = --log-target=syslog --exit-idle-time=5
-
-## The default sink to connect to
-; default-sink = 
-
-## The default source to connect to
 ; default-source =
-
-## The default sever to connect to
 ; default-server =
 
-## Autospawn daemons?
+; autospawn = no
-; autospawn = 0
+; daemon-binary = @PA_BINARY@
+; extra-arguments = --log-target=syslog --exit-idle-time=5
 
-### Cookie file
+; cookie-file =
-; cookie-file = 
 
-### Disable shared memory data transfer
+; disable-shm = no
-; disable-shm = 0