By default no modem is allowed.
Property "bluez5.hfphsp-backend-native-modem" can be 'none', 'any' or the
modem device string has found in 'Device' property of
org.freedesktop.ModemManager1.Modem interface, e.g. for PinePhone
"/sys/devices/platform/soc/1c1b000.usb/usb2/2-1".
This allows the HFP HF to retrieve the list of calls with their index,
state and remote number (if available).
This commit shared the list of calls between modemmanager.c and
backend-native.c, and switches call state storage from ModemManager
states to CLCC states
Allow to answer, reject or terminate a call.
Answering or rejecting a call can only be done on an incoming call.
Terminating a call can only be done on active, dialing or alerting call.
The Voice object lists the Call objects, which provides status of each call.
+CIND call indicator is set if at least one of the call is active.
+CIND callsetup indicator is set if one of the call is in ringing in or out
or dialing state.
The Modem object provides the own number (used by +CNUM), the network
service availability and signal strength (used for the +CIND).
+CIND indicators can be activated/deactivated using AT+BIA except for
call, callsetup and callheld indicators which should always reported.
All indicators are enabled on connection.
uint32_t i;
for (i = 0; i < SPA_N_ELEMENTS(some_array); i++)
.. stuff with some_array[i].foo ...
becomes:
SPA_FOR_EACH_ELEMENT_VAR(some_array, p)
.. stuff with p->foo ..
HFP 1.8 states in 4.35.1:
Due to the small inconsistency between the GSM standard [2]) and the current
Headset specification ([3]), the HF shall also accept the “=” symbol,
in place of “:”, as a valid separator for this unsolicited result code.
iOS seems to use "=", so accept that as well.
See #2463
Both HFP and HSP require an AT command from HF/HS to AG to
be terminated by CR, not LF. (HFP 1.8, 4.34.1; HSP 1.2, 4.8.1)
See #2463
Fixes: 0b2d3730b6 ("bluez5: Add HFP HF support")
`strsep()` is simpler to use than `strtok()` or `strtok_r()`
while being thread-safe and reentrant.
Although it is an extension, it is available in both glibc and musl.
When rfcomm_hfp_ag() returns false, an "ERROR" reply is sent.
When testing if the SLC is configured, 2 "ERROR" replies are sent, which
should not be done.
For backward compatibility with old Wireplumber releases, support the
old api.bluez5.a2dp.sink/source names, and use them in object events
instead of the media.sink/source names.
BlueZ adds the Endpoint property to the Properties dictionary of
SelectProperties.
This allows to know which remote Endpoint is an acceptor, and so which
local transport should be used as an initiator.
Multiple transport from the same device may share the same stream (CIS)
and group (CIG) but for different direction, e.g. a speaker and a
microphone. In this case they are linked.
In this case:
- On acquire, if another transport has already been acquired, the new
transport should not call Acquire or TryAcquire but re-use values from
the previously acquired transport,
- on release, the closing of transport fd and call to Release should be
done only for the last transport.
We can't determine which remote endpoint or device the
SelectConfiguration() call is associated with. For LE Audio BAP, as this
method is called only for the Initiator we set the whole instance as a
Central/Initiator.
This flag is unset on BAP media endpoint removal.
