As far as I can tell, the code in question was not doing anything there
and was also breaking the new code elsewhere, so it was put on the
chopping block. Don't mind the squirming tentacles.
Signed-off-by: Niklāvs Koļesņikovs <89q1r14hd@relay.firefox.com>
Add factored out helper for ISO socket I/O.
ISO sockets need synchronization of writes and audio position for
different stream fds in the same isochronous group, and it's easier to
separate out the part that coordinates it.
Implement BLE MIDI node, providing an input and output port. MIDI data
received is normalized and produced on output port. Data from input
port is converted to BLE MIDI and sent to the device.
Event timestamps come from device clock, whose offset to wall clock we
determine by correlating packet reception times with their timestamps.
The jitter in packet reception is likely much larger than device clock
error, so we average over that.
The Modem object provides the own number (used by +CNUM), the network
service availability and signal strength (used for the +CIND).
+CIND indicators can be activated/deactivated using AT+BIA except for
call, callsetup and callheld indicators which should always reported.
All indicators are enabled on connection.
Support Opus as A2DP vendor codec.
The specification for vendor A2DP codec is our Pipewire-specific one, so
it is compatible only with devices running Pipewire.
The file name "lc3.h" in the ETSI LC3plus package may conflict with the
actual LC3 codec, so try to find a file "lc3plus.h" instead. Also try
to find a pkg-config dependency for it first (in which case use lc3.h,
assuming it's in different directory). This can be fine tuned, if
something starts to package that library.
Since meson 0.59.0, a feature object has an `allowed()`
method which returns true when the feature is set to
'enabled' or 'auto'.
Utilize that instead of the previously used
not feature.disabled()
Most feature checks already use #ifdef, and do not care about
the value of the macro. Convert all feature checks to do that,
and simplify the meson build scripts by replacing
if cond
cdata.set('X', 1)
endif
with
cdata.set('X', cond)
Using a probe connection to determine adapter msbc capability causes
problems on some adapters (ff8c3d2, 84bc0490a5, 717004334b,
pipewire#2030) and seems to be a bad idea.
Go back to probing for transparent msbc transport capability via HCI
commands. bluetooth/hci.h may be deprecated later, but for now it's
better to go back to using it. (In practice, adapters not supporting
esco appear to be fairly rare; kernel commit in 2013 refers to "older
devices", so if we can't use HCI, assume the adapter supports the
necessary modes.)
Some devices (Bose Mini Soundlink II, Air 1 Plus, ...) don't enable
AVRCP volume control, or fail to enable it before a hardware button is
pressed. However, these devices appear to enable it, if an AVRCP player
is present.
As a workaround, register a dummy AVRCP player for each adapter. It only
displays the current transport acquisition state as playing/stopped, but
just its presence appears to be enough to make devices behave.
Multiple AVRCP players interfere with each other, as BlueZ uses the one
registered earliest as the default player. So add also a config option
for disabling this. (It's not common to have mpris-proxy etc. running,
so defaulting to true should be OK.)
See pipewire#1157
It's not really the responsibility of the session manager to load the
bluez5 device quirks, and it's easier for eg. Wireplumber if it doesn't
need to do it.
Move loading bluez-hardware.conf to be the responsibility of the bluez5
spa plugin, similarly as the alsa plugin deals with the ACP database.
Put the configuration to share/spa-0.2/bluez5, mirroring the plugin
directory structure in lib/spa-0.2/bluez5.
Change codec factory names to api.codec.bluez5.*, so that they won't
conflict with old config file lib name rules for api.bluez5.*
Specify the fallback library name when loading the codecs, so that it
works without the rules in config files.
Make easier to package A2DP codecs separately, by splitting each to a
separate SPA plugin. Adjust the code to not use a global variable for
the codec list.
The A2DP SPA interface API is in the bluez5 private headers, and not
exposed in installed SPA headers, as it's too close to the
implementation.
Use the quirks database to check whether to enable MSBC codec for each
device.
If quirks don't allow ALT1 mode for an USB adapter, check whether the
adapter has an usable ALT6 mode and disable MSBC if not.
Add necessary apis to bluez transport.
Add A2DP(AVRCP) absolute volume support. Source volume can only update to adapter node but not from due to AG nodes don't have route.
Since A2DP/HSP/HFP volume is already percentage itself, it has been mapped to pulseaudio volume then converting to linear volume.
Move SCO polling to a single place, and abstract mtu handling.
Autodetect suitable tx packet size based on rx, instead of relying on
the kernel providing correct values.
