Wim Taymans
f30b4bf506
alsa-seq; remove latency property
2019-10-24 12:48:28 +02:00
Wim Taymans
2fa97daa24
add some constants for max samples
2019-10-24 12:35:00 +02:00
Wim Taymans
605a0a6f97
jack: increase max buffer size
2019-10-24 12:21:17 +02:00
Wim Taymans
12fb58add1
core: explicitly calculate min and max quantum
...
Just clamp to default for now until we can implement power save mode.
2019-10-24 12:19:21 +02:00
Wim Taymans
b74080ea55
alsa: give capture stream highest priority
...
Make sure we always make the capture device a master. We would prefer
to only do resampling on the sinks when we need to.
2019-10-24 11:06:37 +02:00
Wim Taymans
3c9aa2e96c
fmt: add sse2 optimized s32->f32d
2019-10-24 11:06:04 +02:00
Wim Taymans
aab72a70e6
submodule update
2019-10-24 11:05:49 +02:00
Wim Taymans
d4ed1f6832
jack: fix confusion between frames and bytes
2019-10-24 10:23:01 +02:00
Wim Taymans
320dc203cf
export-spa: print node id
2019-10-23 17:37:10 +02:00
Wim Taymans
38bc80a3b8
remote-node: implement suspend
2019-10-23 17:20:46 +02:00
Wim Taymans
e8464cf1b3
port: fix client-side buffers again
...
Clear the ALLOC flag for the mixer use_buffers only when the node did
the allocation already.
Fixes #193
2019-10-23 16:45:22 +02:00
Wim Taymans
9f4df5ee40
alsa: add some debug, tweak resync
2019-10-23 16:26:35 +02:00
Wim Taymans
5383782336
alsa: Disable rate matching for the same card
...
Add a clock name to the clock, remove the old api/clock_id. This makes
it easier to add descriptive names
Place the alsa card number in the clock name.
Check the clock name of the master clock and if it matches our own
clock, disable rate matching.
2019-10-23 16:04:03 +02:00
Wim Taymans
54f6834de4
io: add clock_id to clock
...
Can be used to determine if we need to slave or not.
Add node abi test
Fix some headers
2019-10-23 13:13:01 +02:00
Wim Taymans
2ac8be4ac7
audioconvert: negotiate when starting
...
Don't try to negotiate from set_param and use_buffers, instead
negotiate when we Start and clear on Suspend.
2019-10-23 10:34:05 +02:00
Wim Taymans
0500454ac9
jack-device: improve device name
2019-10-23 10:33:42 +02:00
Wim Taymans
ff96165035
Improve debug
2019-10-22 13:06:20 +02:00
Wim Taymans
eb1d675cb0
node: add master priority
...
Change node.priority to priority.session to indicate that this
is the priority that the session manager uses to select the node.
Add another priority.master that the core uses to select a master
driver. Keep the driver nodes sorted by master priority.
Let jack always prefer to connect to the master driver nodes.
2019-10-22 12:25:25 +02:00
Wim Taymans
fa25900682
alsa-seq: fix for being a slave
2019-10-22 12:24:04 +02:00
Wim Taymans
d9e9c6b7c8
jack: do better port sorting
...
First sort by type, then by master priority, then by port id.
2019-10-22 12:21:37 +02:00
Wim Taymans
e10a74785c
pcm: don't complain on Suspend
2019-10-22 12:20:29 +02:00
Wim Taymans
659152d392
list: improve spa_list_for_each_safe_next
2019-10-22 12:20:02 +02:00
Wim Taymans
8997a078aa
jack: skip when there are no buffers on a mixer
2019-10-22 09:17:38 +02:00
Wim Taymans
3aa19dd38a
node: send Suspend to the node
...
Send suspend to the node when suspending. This is usually the same
as puse for all nodes.
Implement negotiation when we Start audioadapter. This makes it
easier that to track the ports that are negotiated for now.
Use Suspend to clear the audioadapter negotiation.
2019-10-21 17:24:51 +02:00
Wim Taymans
f50a5ca215
jack: handle suspend
2019-10-21 17:23:26 +02:00
Wim Taymans
34a1a988ba
session: make a jack device
...
Add a jack device and activate it when we release the device (for JACK
presumably). We need to work around some issues, jack does not allow
us to connect yet when it asks to release the device so we need to
wait a little and then connect.
2019-10-21 16:39:08 +02:00
Wim Taymans
b3d72fb82d
jack: improve properties
2019-10-21 16:37:52 +02:00
Wim Taymans
b284988755
jack: improve shutdown
2019-10-21 16:07:33 +02:00
Wim Taymans
128a8e6c3c
cli: add create-device command
...
Add create-device command
Add short command aliases
2019-10-21 16:00:43 +02:00
Wim Taymans
116676e149
node: add active flag for rate match
...
Add flags to the rate match io area
Add flag to activate/deactivate rate match
Set active flag in rate match when slaved
Update rate before starting resample
2019-10-21 10:13:56 +02:00
Wim Taymans
f5b9862a89
alsa: tweak xrun recovery
...
Don't try to resync right after a xrun.
Init the dll after reslaving.
2019-10-18 22:53:02 +02:00
Wim Taymans
2e3608a34f
Improve some debug
2019-10-18 21:54:44 +02:00
Wim Taymans
1eca773145
media-session: only deal with state when it changed
...
Look at the change_mask and only deal with the state when it changed
or else we might start the idle timer again when something unrelated
changed.
2019-10-18 21:52:24 +02:00
Wim Taymans
92d5c179d6
tests: set the samplerate in the format
...
This works for now without a samplerate because we ignore it but
it might not in the future..
2019-10-18 21:51:07 +02:00
Wim Taymans
566640a21b
audioadapter: fix switch between master and slave
...
When we get worken up with a callback, mark ourselves as a master
because we then need to avoid running the converter again in the
process callback. After we perform the process callback, unmark
ourself as master and wait for the next cycle.
This fixes switch from master to slave for sources.
2019-10-18 21:47:37 +02:00
Wim Taymans
2758a4555f
meson: enable mixer
2019-10-17 13:04:30 +02:00
Wim Taymans
102bd21d0e
alsa: lower priority of cards with device not starting from 0
2019-10-17 13:03:28 +02:00
Wim Taymans
ecd8dbc7f0
node: add node.priority
...
Add a simple priority to nodes.
2019-10-17 12:43:23 +02:00
Wim Taymans
e2f6a7a34e
audiomixer: add AVX optimized mixer functions
2019-10-17 09:36:18 +02:00
Wim Taymans
d8eb7ce81f
audioconvert: fix avx flags
2019-10-17 09:35:24 +02:00
Wim Taymans
7798cf7364
core: improve alignment
...
Use the CPU alignment to align memory of allocated buffers. This makes
it more likely that all CPU optimizations can be done.
2019-10-17 09:34:27 +02:00
Wim Taymans
c8ffcaaefe
plugins: just check the data pointer
...
We don't need to look at the data type, we just just be happy when
the data pointer is filled in.
2019-10-16 12:23:42 +02:00
Wim Taymans
8899d00bfc
control: add control mixer plugin
...
Add a mixer plugin for control messages and plug it in ports with
control messages.
2019-10-16 11:13:23 +02:00
Wim Taymans
0978343e44
buffers: make max buffers a config option
2019-10-16 11:12:03 +02:00
Wim Taymans
e0f79bcbb8
io: add some more docs and memory io area
2019-10-16 11:10:57 +02:00
Wim Taymans
b37bf7e068
alsa-seq: ask for more data when consumed
2019-10-16 10:44:40 +02:00
Wim Taymans
6ad52b1a11
iter: check if size can hold a spa_pod
2019-10-16 10:44:12 +02:00
Wim Taymans
e28b5b8232
pipewire: return better errno symbol not found
2019-10-16 10:43:36 +02:00
Wim Taymans
2b75f28d8b
remote: create/destroy mempool with the core proxy
2019-10-09 00:03:57 +02:00
Wim Taymans
e18ca6e9c8
protocol-native: don't try to flush when the source is gone
...
When the connection is broken, we destroy the source avoid trying
to flush when the source is gone.
2019-10-08 23:47:02 +02:00
