Add the missing type info for:
* SPA_FORMAT_VIDEO_colorRange
* SPA_FORMAT_VIDEO_colorMatrix
* SPA_FORMAT_VIDEO_transferFunction
* SPA_FORMAT_VIDEO_colorPrimaries
We currently often create pods in a uint8_t buffer, which is not aligned
to 8 and might cause deref and other problems.
We should either align the buffer we write into or maybe make the
builder add some padding before the buffer to align it. We have to be
careful with that when we assume the buffer start is the beginning of
the pod..
Fixes#4794
A2DP v1.4 uses the rfa bits for adding 5.1 and 7.1 configurations.
Clear those bits properly when sending configuration, in case remote
device sets them.
Previously, custom object properties were printed as "unknown",
and the offset (wrt. `SPA_PROP_START_CUSTOM`) was not displayed.
A custom property is distinct from an "unknown" one. Being able
to quickly differentiate the two is useful. Furthermore, knowing
the custom property id (i.e. the actual numeric id minus
`SPA_PROP_START_CUSTOM`) is also very helpful.
To address the above, print a custom property (i.e. anything with
an id at least `SPA_PROP_START_CUSTOM`) as follows:
Spa:Pod:Object:Param:Props:Custom:123
where the last component is the custom property id.
Significantly better CPU performance in lieu of canceller quality. Not
implemented for 0.x series, as there's a lot more to enable there (such
as routing modes), and I am hoping to drop support for those versions
before too long.
Ensure we have at least a `.` after `audioconvert.filter-graph`, so we
don't try to read past the end if it does not exist.
Also document in the param name that an index is expected.
When dialing an incorrect phone number some phones (e.g. iOS 18.5)
replies with OK but never send +CIEV updates, so there's no way to
know that the dial is not in progress and the call object should be
removed.
This change waits for +CIEV event to create the call object.
Make a new function to also returnt he child size and type.
Make a new function that accepts the array item size. Check that the
array item size and destination item size match before memcpy the array
contents. This avoids overflowing the target array with a malformed
array pod.
For the embedded children, they will always be aligned. We can also
avoid the max size checks for children because this is already checked
for the parent and with the remaining size check.
For arrays and choice we simply don't get any elements in the array when
the sizes are too large.
In USB Audio Class 2 (UAC2) setups, pitch control is handled by
feedback endpoints. The host adjusts its data rate accordingly.
When pitch control is active (pitch_elem), applying the default
delay-locked loop (DLL) bandwidth can lead to instability and
oscillations around the target rate.
This patch adds a new parameter, api.alsa.dll-bandwidth-max, to
configure the maximum DLL bandwidth. It introduces a new field
in the ALSA state to store this value.
By default, it uses SPA_DLL_BW_MAX, but when pitch control is in
use, setting it to a lower value (e.g. 0.02) helps ensure better
stability, based on empirical testing.
We don't really want to do this here otherwise structs that include a
pod will be padded so that an array of those structs will be aligned.
This makes a test case fail where we have a struct with a choice_body
followed by 3 uint32_t enum values. The size with and without the
aligned attribute is different.
Make a SPA_POD_ALIGN = 8 and make sure all pods are aligned to it. Use
the new constant to pad and check alignment. Make some new macros to
check for the pod type, alignment and minimal size.
In some cases, it is possible that the follower shares a clock with the
driver, but the driver rate is not known when the follower is assigned
to the driver. If this happens, then state->driver_rate is 0, and when
setting the format, we might think that we need to resample (because
follower rate != driver rate). This can cause us to incorrectly halve
the period size for the node.
This was introduced in commit 0b67c10a9c,
which forces reevaluation of matching status on driver change.
To avoid this, let us also probe for the driver rate when updating the
matching status, so we can make the update more accurate.
Fixes warning:
[186/359] Compiling C object spa/plugins/v4l2/libspa-v4l2.so.p/v4l2-source.c.o
In file included from ../spa/plugins/v4l2/v4l2-source.c:164:
../spa/plugins/v4l2/v4l2-utils.c: In function ‘spa_v4l2_enum_format’:
../spa/plugins/v4l2/v4l2-utils.c:1103:22: warning: unused variable ‘drop_next’ [-Wunused-variable]
1103 | bool drop_next = false;
| ^~~~~~~~~
Some devices might have nonfunctional 'Pro Audio' sound. This patch adds a
new 'api.acp.disable-pro-audio' option to disable pro-audio profile entirely.
Because we can now destroy sources (and free the source structure) by
simply holding the lock, there is a window where we might access the
freed source.
When we in iterate release the lock and go into the epoll, another
thread might acquire the lock and delete the fd from epoll. This might
happen right after epoll detected activity on the fd. When iterate
manages to acquire the lock again, it will process to dispatch the
active fd and deref the ep.data pointer, which is now pointing to freed
memory.
Fix this by incrementing a removed_count whenever we remove a source.
Check the counter if it was the same as before the epoll otherwise we
can't assume all sources are alive still. Return in that case as if
there were no fds to poll. The caller should reenter the iterate at some
point and we will return all the fds with activity, minus the one that
got destroyed. We need to give control to the caller because part of the
removal could be to stop the loop iteration all together.
With .enabled(), Meson doesn't have some magic that packagers rely on
to explicitly disable finding a dependency if an option is off. Drop
the unnecessary .enabled() accordingly.
When we are the owners of the loop lock and we are not in the loop
thread itself, release all locks so that the loop can start processing
our invoke items and we get a chance to make progress. After that
re-acquire the locks.
This can happen when you change some of the core loop_locked() calls to
blocking _invoke functions that are called with the loop locked.
We have all core blocking invoke functions removed now so this is not
actually going to be used but just in case an application tries to
blocking invoke while locking the loop, this will now at least do
something else than deadlock.
This assumes that the modifier is always 'linear'. That is not quite
correct for all V4L2 formats. But PipeWire only uses input devices and
other modifiers are very unlikely.
This makes it possible to use DMABUFs with the GStreamer pipewiresrc.
This reverts commit b57b87abbb.
It turns out this device is subtily different and doesn't work with the
current profile configurations. A UCM profile was added to alsa-ucm-conf
instead.
