Expose the card object and always obtain one per pcm.
Keep the configured format in the card object.
Add a api.alsa.multi-rate property. When multi_rate is disabled,
only allow the last configured card rate on all PCMs.
This works around drivers that can't handle multiple samplerates
on their PCMs.
With this patch it should be mostly safe to configure multiple
sample rates in pipewire.conf
See #1547
Get the ucm prefix only once, when we open the UCM card and then
use it for all devices using the card.
Construct the device name right before we open it with the ucm prefix
and possibly the AES flags instead of messing with the property.
ALSA has problems with creating more than 8 configs per card so cache
the config per card and reuse it.
Fixes problems with no devices after logging out and in again because
ALSA can't create UCM profiles anymore.
See #1553
For hdmi and iec958 devices, enumerate the iec958 formats and
codecs. Initially only PCM is supported as a codec but with
a property or an init option, the list of codecs can be dynamically
configured.
We need to do this or else newly plugged devices might not load.
It does not seem to harm UCM config on my machine, so this reverts
3d372424cc
See #1478
Fixes a number of warnings that look like this:
In file included from ../spa/include/spa/utils/result.h:37,
from ../spa/plugins/alsa/alsa-seq.c:35:
In function ‘set_timers’,
inlined from ‘do_reassign_follower’ at ../spa/plugins/alsa/alsa-seq.c:909:2:
../spa/include/spa/utils/defs.h:191:39: warning: ‘now.tv_sec’ may be used uninitialized [-Wmaybe-uninitialized]
191 | #define SPA_TIMESPEC_TO_NSEC(ts) ((ts)->tv_sec * SPA_NSEC_PER_SEC + (ts)->tv_nsec)
| ~~~~^~~~~~~~
../spa/plugins/alsa/alsa-seq.c:840:28: note: in expansion of macro ‘SPA_TIMESPEC_TO_NSEC’
840 | state->next_time = SPA_TIMESPEC_TO_NSEC(&now);
| ^~~~~~~~~~~~~~~~~~~~
../spa/plugins/alsa/alsa-seq.c: In function ‘do_reassign_follower’:
../spa/plugins/alsa/alsa-seq.c:836:25: note: ‘now’ declared here
836 | struct timespec now;
| ^~~
The reason for these warnings is that spa_system_clock_gettime() may
fail if a version check fails, but the code in question didn't check for
the possible fail. If it failed, then execution would continue, and the
arguments that were passed to the macro will be used uninitialized.
Fix this by checking whether function succeeded.
Move the code to check the position duration for changes to one
new method.
Also check for samplerate changes and adjust the resampler state
accordingly.
Strip the _alibpref from the device name, it contains a local counter
to identify the ucm card that should remain internal. We set a flag on
the device to notify of this.
Re-add the _alibpref of the local card to the device name if the
device was flagged.
See #1286
The _alibpref of the device was created in the session manager and
does not match our local _alibpref. Patch the device name with
the local _alibpref to make things match.
See #1286
Use _alibpref to check if a device needs a UCM local config. Mark
the device as such and use this to set the OPEN_UCM property on
the device.
Open the UCM for a card when the device has the property set. Use the
same logic for loading the UCM as the acp code.
See #1251
UCM devices can require local data from use_case_mgr_open() but since
we do that in a separate process, make sure we reopen the use case
manager in case we are passed a UCM device so that the config is
available.
See #1251
When we start freewheeling, pause the device and resume when we
finish freewheel.
In freewheel mode, just discard samples in the sink and produce
silence in the source.
SPA_MEMBER is misleading, all we're doing here is pointer+offset and a
type-casting the result. Rename to SPA_PTROFF which is more expressive (and
has the same number of characters so we don't need to re-indent).
The start-delay adds extra silence to the buffer before starting the
playback. The idea is to have more time to adapt to the device
startup and set the timer more accurately.
See #983, #431
When we are following the resampler requested size in capture, never
keep queued buffers around or we might get out of sync with the
requested size and cause cracks and pops in the resampler.
See #805
Start with an extra period of silence.
Reconfigure a new timeout if we are too far off from the desired
buffer fill level. Reduce this level to the maximum error we
tollerate.
With this we use the extra period of silence to reconfigure the
timeout until we are close enough and we can start the dll with a
small error.
See #892
Don't try to move closer to the read/write pointers in the ringbuffer
to compensate for the resampler delay. We might not have enough time
anymore to complete a cycle without xruns. The delay is properly
reported in the clock times and should also be reported on the port
latency eventually.
For batch devices we want to keep the IRQ so that the pointers are
updated with the period-size. Brings my UMC404HD to 4.8ms roundtrip
times with IRQ at 6 sample and batch enabled.
