alsa_write_sync can insert or remove some data from alsa when
resynchronization is needed.
Avail and delay are equal when high precision timestamps are not allowed.
When the high precision timestamps are enabled, the delay is avail
adjusted to current_time.
Signed-off-by: Martin Geier <martin.geier@streamunlimited.com>
Use codecs via media_codec in sco-sink instead of implementing the
encoding in-place.
In future, media-sink could replace sco-source to reduce code
duplication.
Use codecs via media_codec in sco-source instead of implementing the
decoding in-place.
Also slightly adjust media-source decode semantics.
In future, media-source could replace sco-source to reduce code
duplication.
Properties of type Id should have a type of the enum with the possible
values associated with them.
The other types that don't have a fixed enumeration but are usually
mapped to some constant/description with PropInfo should be Int.
Fixes!2399
This allows to connect the SCO link with old HFP AG devices which
doesn't support the codec negotiation.
The audio connection could be done even without an ongoing call.
libcamera says that cameras should default to manual focus mode. This
means that unless pipewire clients specifically change this control,
users with an autofocus-capable camera are left with an out-of-focus
image. This patch sets the autofocus mode to continuous and enables
auto-exposure (as the default for this is unspecified).
Testing with an imx708 on Raspberry Pi OS on a Raspberry Pi 4, before
this patch the image was generally out of focus in Firefox/webrtc, after
this patch autofocus works correctly.
When a linked node needs to be resynced we actually never clear the
flag or reset the dll. Move the code around so that it still does
the reset of the flag and dll without actually doing the resync in
the ringbuffer when it is a linked node.
When we do_prepare, always reset the dll. We already set the alsa_sync
field but that is only used by followers to resync in some cases.
When reseting the dll, we also reset the next_time and base_time values,
we however need to do this before calculating the error in update_time
when we are the driver in IRQ mode or else we get some crazy error
that distorts the rate estimation.
Interrupts are disabled in alsa_irq_wakeup_event -> playback_ready method
to not produce another wakeups when waiting for a new data. Interrupts are
enabled again when a new data arrives in a method spa_alsa_write.
In rare cases, when there is multiple streams providing data and one of
them is disconnected, a new data fails to be delivered and the spa_alsa_write
is not called. Not providing data produces underrun and alsa-pcm invokes
recovery process. Recovery process starts a new playback, but without interrupts
enabled is graph not triggered and new data are not delivered (to enable
interrupts). Recovery process keeps running in loop.
Now the interrupts are enabled again after the recovery and the starvation
should not occur.
Signed-off-by: Martin Geier <martin.geier@streamunlimited.com>
The hooks were previously used to unlock the loop but now that the
lock is handled inside the loop itself and we don't unlock before the
blocking read anymore, we should also not call the hooks.
The blocking invoke function is not meant to be called with any of the
loop context locks acquired in order to avoid a deadlock. Make this (and
other blocking risks) clear in the documentation.
See #4472
Make one buffersrc for each input and configure it to mono. Try to guess
the channel position from the port name or use the config option and
fall back to FC (MONO) if unspecified.
Make one buffersink for each output and place a format converter in
front of it. Configure the converter to produce 1 channel with a layout
guessed from the port name or from the config.
With this we can use channelsplit and amerge to create multichannel
streams for avfilter plugins.
A signed value doesn't really make sense in this context, so let's keep
it unsigned so the semantics are clear. This does break the interface,
but should be okay since it's not in a release yet.
When the Bluetooth earphones claim to support AAC `MPEG-2 AAC LC` type only,
PipeWire encodes audio using MPEG-4 FDK-AAC profile which enables unsupported
Perceptual Noise Substitution (PNS) encoder feature.
Use AOT_MP2_AAC_LC pseudo-profile which is AOT_AAC_LC with PNS disabled.
We should prefer the value of the follower when fixating to the
PortConfig format.
To make this actually work we need to be able to check if the value is
within the configured ranges. Implement the check for all types by
simply comparing the memory. This should then work also for checking
arrays, such as channel positions.
config.h needs to be consistently included before any standard headers
if we ever want to set feature test macros (like _GNU_SOURCE or whatever)
inside. It can lead to hard-to-debug issues without that.
It can also be problematic just for our own HAVE_* that it may define
if it's not consistently made available before our own headers. Just
always include it first, before everything.
We already did this in many files, just not consistently.
When we simply need to change some state for the code executed in the
loop, we can use locked() instead of invoke(). This is more efficient
and avoids some context switches in the normal case.
