When api.alsa.split-enable=true for ACP device, instruct UCM to not
use alsa-lib plugins for SplitPCM devices.
Grab the information from UCM for the intended channel remapping, and
add the splitting information to the nodes emitted.
Session manager can then look at that, and load nodes to do the channel
splitting.
The hardware controls we track for volume and mute state can change as
part of enabling or disabling the UCM device. This then triggers a
re-sync of our state with the hardware controls, which can e.g. set our
volume to an unwanted value as the result of enabling the device, or set
a hardware control to a wrong value based on our volume while disabling
the device. So these UCM-triggered changes to enable/disable the device
will at best show up on user interfaces and cause confusion, but maybe
even will push the hardware into an unexpected state.
The volume and mute state we set from user interfaces only make sense
when the devices are enabled. They should not be kept in sync with
hardware for inactive UCM devices [1]. Skip the callbacks for reading
and changing volume and mute state if the UCM device is disabled. This
way, the volume/mute controls for sinks/sources are essentially detached
from the hardware controls until the UCM device is re-enabled.
[1] https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/772#note_1872757
Link: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/772
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
The ucm_get_device_property() function adds to each UCM device's
playback_volumes (or capture_volumes) hash map an associated volume
mixer keyed with the UCM verb. These key-value pairs are then iterated
over in various places which assume the key is a profile name. This
assumption is no longer true since we can generate multiple profiles to
use conflicting devices.
A previous commit 45278904167f ("alsa-ucm: Stop conflating profile name
with UCM verb name") fixes some instances of this assumption, but misses
the relation explained above. Fix more instances of misleading
"profile"s where the UCM verb name is actually meant.
Link: 7005eafee3
Fixes: 57295beee1a6 ("alsa-ucm: Stop conflating profile name with UCM verb name")
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
After previous patches, we should be generating no combination ports, so
we don't need to store multiple modifiers per mapping. Simplify the code
based on this.
Link: 4821a0569e
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
After previous patches, we should be generating no combination ports, so
we don't need to store multiple devices per mapping. Simplify the code
based on this.
Link: 084d70a1e2
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
[Wim: Apply to acp add_profiles() and acp_card_set_profile()]
After previous patches, we should be generating no combination ports, so
we don't need to store multiple devices per port. Simplify the code
based on this.
Link: bf1708213b
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
A previous commit makes mapping names depend on the UCM device name.
Since UCM device names are unique, this means a mapping will at most
have one port and thus no combination ports can be generated.
This removes the dead code in the pa_alsa_ucm_add_ports_combination()
function, unrolls the remaining code in its helper functions that it
used, and renames it to pa_alsa_ucm_add_port() to signal that it no
longer generates combinations.
Link: 0789a8fb76
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
[Wim: Apply to acp add_profiles(), acp_card_set_profile(), compat.h]
Currently each UCM verb generates one profile named the same as the
verb, meaning it's trivial to know which verb the profile belongs to.
This will be slightly harder to do when we generate multiple profiles
per UCM verb (e.g. to make use of conflicting devices).
It would still be possible to parse the profile name to get the UCM
verb, but instead let's keep track of the struct instance representing
the profile's associated verb. This also lets us remove a block of code
searching for the verb by its name.
Co-authored-by: Jaroslav Kysela <perex@perex.cz>
[Alper: Reused Jaroslav's UCM profile context changes for UCM verb
instead of combined devices.]
Link: 9fc7064b9a
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
While switching profiles, it's possible that we will want to do more
work besides switching UCM verbs. The alsa-card module already has our
profiles as structs, but passes in only the names instead of the entire
struct. Make things work with the struct instead, so we can add other
things (like a UCM context) to it and use those here.
Co-authored-by: Tanu Kaskinen <tanuk@iki.fi>
[Alper: Split into its own commit and integrated Tanu's snippet.]
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: 880ff393f1
[Wim: Apply to acp_card_set_profile() as well]
Co-authored-by: Wim Taymans <wtaymans@redhat.com>
Modifiers currently keep their conflicting and supported devices's
names, and these names are resolved to devices every time we need to use
them. Instead, resolve these device names while creating the modifier
struct and keep track of the resulting device structs in idxsets, same
as how device structs keep track of their support relations.
Link: 9b06e8fef4
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
The ucm_get_device_property() function adds to each UCM device's
playback_volumes (or capture_volumes) hash map an associated volume
mixer keyed with the UCM verb. These key-value pairs are then iterated
over in various places which assume the key is a profile name. This
assumption is no longer true since we can generate multiple profiles to
use conflicting devices.
A previous commit 45278904167f ("alsa-ucm: Stop conflating profile name
with UCM verb name") fixes some instances of this assumption, but misses
the relation explained above. Fix more instances of misleading
"profile"s where the UCM verb name is actually meant.
Fixes: 45278904167f ("alsa-ucm: Stop conflating profile name with UCM verb name")
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
After previous patches, we should be generating no combination ports, so
we don't need to store multiple modifiers per mapping. Simplify the code
based on this.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
After previous patches, we should be generating no combination ports, so
we don't need to store multiple devices per mapping. Simplify the code
based on this.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
After previous patches, we should be generating no combination ports, so
we don't need to store multiple devices per port. Simplify the code
based on this.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
A previous commit makes mapping names depend on the UCM device name.
Since UCM device names are unique, this means a mapping will at most
have one port and thus no combination ports can be generated.
This removes the dead code in the pa_alsa_ucm_add_ports_combination()
function, unrolls the remaining code in its helper functions that it
used, and renames it to pa_alsa_ucm_add_port() to signal that it no
longer generates combinations.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Currently each UCM verb generates one profile named the same as the
verb, meaning it's trivial to know which verb the profile belongs to.
This will be slightly harder to do when we generate multiple profiles
per UCM verb (e.g. to make use of conflicting devices).
It would still be possible to parse the profile name to get the UCM
verb, but instead let's keep track of the struct instance representing
the profile's associated verb. This also lets us remove a block of code
searching for the verb by its name.
Co-authored-by: Jaroslav Kysela <perex@perex.cz>
[Alper: Reused Jaroslav's UCM profile context changes for UCM verb
instead of combined devices.]
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
While switching profiles, it's possible that we will want to do more
work besides switching UCM verbs. The alsa-card module already has our
profiles as structs, but passes in only the names instead of the entire
struct. Make things work with the struct instead, so we can add other
things (like a UCM context) to it and use those here.
Co-authored-by: Tanu Kaskinen <tanuk@iki.fi>
[Alper: Split into its own commit and integrated Tanu's snippet.]
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Modifiers currently keep their conflicting and supported devices's
names, and these names are resolved to devices every time we need to use
them. Instead, resolve these device names while creating the modifier
struct and keep track of the resulting device structs in idxsets, same
as how device structs keep track of their support relations.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Strip the alibpref from the device string in the mapping name. This
name is used to generate the node name eventually and we don't want
this random identifier in it.
Fixes#1362
libacp is a port and wrapper around the pulseaudio card profile code.
It uses a set of templates for construct a card profile and mixer port
settings. It also has support for UCM when available for the hardware.
