Move some things around. Move the duration of the current cycle
to the clock. Also add the estimated next timeout to the clock.
Add a generic media specific counter to the clock.
Clean up the position_bar info. We can do with only a double beat
value and make the signature in floats.
Flesh out the io_position info. This has now the information needed
to convert a raw clock time into a stream time. It basically has
the same kind of features as GStreamer segments such as looping,
variable rate playback etc.. It also contains the state of the
timeline (paused/playing) and it can be used to update the position
and state from clients.
There is also extended information in the position field that
clients can update when they can.
Plugins basically only update the clock info they get (and use
the position info to check if they are slaved or not).
Before each cycle, check if there is a pending position update and
apply it.
Add a new PortConfig parameter to configure ports of elements that
are marked with the SPA_NODE_FLAG_*_PORT_CONFIG. This is used to
configure the operation of the audioconver/audioadapter nodes and
how it should convert the internal format. We want to use the
Profile parameter only for cases where there is an enumeration of
values, like with device configuration.
Add unit tests for audioconvert and adapter to check if they handle
PortConfig correctly.
Make the media session use the PortConfig to dynamically configure
the device nodes.
Remove audio-dsp, it is not used anymore and can/should be implemented
with a simple audioconvert spa node now and some PortConfig.
Remove the CAN_USE_BUFFERS flag, it is redundant. We can know this
because of the IO params and buffer params.
Add flags to the port_use_buffer call. We also want this call to
replace port_alloc_buffer. Together with a new result event we can
ask the node to (a)synchronously fill up the buffer data for us. This
is part of a plan to let remote nodes provide buffer data.
Use a new rate_match io area to exhange rate matching info between
sink/source and resampler.
Compensate for the rate match delay when scheduling timeouts.
Let the resampler notify the source of how many samples it needs to
produce the desired quantum. Make sure we keep an extra buffer in
the device to be able to make this possible.
Let the adapter directly call the slave node process function.
Define a set of standard factory names and document what they
contain. This makes it possible to change the implementation by
mapping the factory-name to a different shared library.
The interface struct has the type,version and methods of the
interface.
Make spa interfaces extend from spa_interface and make a
separate structure for the methods.
Pass a generic void* as the first argument of methods, like
we don in PipeWire.
Bundle the methods + implementation in a versioned inteface
and use that to invoke methods. This way we can do version
checks on the methods.
Make resource and proxy interfaces that we can can call. We
can then make the core interfaces independent on proxy/resource and
hide them in the lower layers.
Add add_listener method to methods of core interfaces, just
like SPA.
Also emit port info the the merger monitor ports.
Proxy params and buffers to the right monitor ports.
fmtconvert does not always have dsp ports
Increase resampler output buffer sizes so that we can up and downsample.
Fix little off by one in native resampler.
Fix passthrough in speex resampler.
Add a sinc based resampler that, unlike speex, avoids memcpy and
works directly on the source data. It also allows for ssse3
optimizations and aligned loads. It will later switch to table
interpolation when doing variable rate.
Add some const and SPA_RESTRICT to methods
When the input and output is the same, work in passthrough mode
where we simply copy place the input pointer onto the output buffer
without doing a memcpy.
Do memcpy when the resampler is not active.
Make struct spa_node_events for events emited from the main thread
and keep the spa_node_callbacks for the data thread callbacks.
The add_listener method installs the events and it's possible to
install multiple handles. Adding a listener first emits the info
and port_info events when installed, similar to how the PipeWire
proxy bind works.
This removes the need for the spa_pending_queue and makes it easier
to implement the _sync versions.
Add some helpers to make it easier for plugins to emit all the info
to new listeners.
Use the listeners for devices as well.
Add a new struct spa_param_info that lists the available params on
a node/port and if they are readable/writable/updated. We can use
this to replace and improve the PARAM_List and also to notify
property change and updates.
Update elements and code to deal with this new param stuff. Add
port and node info to most elements and signal changes.
Use async enum_params in -inspect and use the param info to know
which ones to enumerate.
Use the port info to know what parameters to update in the
remote-node.
Don't use special callback in node to receive the results. Instead,
use a generic result callback to receive the result. This makes things
a bit more symetric and generic again because then you can choose how
to match the result to the request and you have a generic way to handle
both the sync and async case. We can then also remove the wait method.
This also makes the remote interface and spa interface to objects very
similar.
Make a helper object to receive and dispatch results. Use this in the
helper for enum_params.
Make device use the same result callbacks.
Make a special function for pending results to make it clear that it
is different from normal results. Don't pass result code to result
function, it is not useful because since the callback is called, all
must be fine.
The spa_pending is removed from the list right before the callback
and can thus be freed in the callback. Pass the spa_pending in
the pending callback so that extra data can be added that way.
Reuse spa_pending objects in link and nodes instead of allocating. We
always only have one pending operation and we can cancel any pending
previous operation by removing the pending.
Remove the done and error callbacks. The error callback is in an
error message. The done callback is replace with spa_pending.
Make enum_params take a callback and data for the results. This allows
us to push the results one after another to the app and avoids ownership
issues of the passed data. We can then extend this to handle the async
case by doing a _wait call with a spa_pending+callback+data that will
be called when the _enum_params returns and async result.
Add a sync method.
All methods can now return SPA_RESULT_IS_ASYNC return values and you
can use spa_node_wait() to register a callback when they complete
with optional extra parameters. This makes it easier to sync and
handle the reply.
Make helper methods to simulate the sync enum_params behaviour for
sync nodes.
Let the transport generate the sequence number for pw_resource_sync()
and pw_proxy_sync(). That way we don't need to keep track of numbers
ourselves and we can match the reply to the request easily.
Add a port_info event. With this, we get updates to ports pushed to
us, which is more convenient and also allows for better dynamic
add/remove of ports.
We don't need to the PortChanged event anymore
We can remove the get_port_ids/get_n_ports/port_get_info methods.
Update plugins
Remove the spa_pod_iter helpers
Remove builder/parser vararg recurse option, you have to
manually recurse into structures when needed. This simplifies
things a lot.
Pass spa_pod_frames to builder and parser explicitly, we don't
have to keep an internal stack anymore.
The parser is now almost a mirror image of the builder.
Make the parser safer when iterating over objects, add functions
to check and get pod contents in a safe way.
Make the builder return errno style results on errors
Improve performance of object properties when they are stored and
retrieved in the same order.
Add many more tests for the builder and parser
Add some benchmarks
Automatically parse and build key/value when in objects without having
to prefix the key with ":"
Automatically build control/value when in sequence without the "."
prefix.
Remove the builder with key/pod, taking a reference to the stack built
temporary pods is not allowed in c++. We can use the varargs version
with the same convenient syntax.
Remove the parser "*" option, it is unused.
Improve spa_pod_builder_add_* and spa_pod_parser_get_* and make them
look similar.
Reorder channels to a more common default order.
Only add channel layout when channels > 1
Don't try to link to a session that is still starting
Small sse fixes.
Make special format types for planar and interleaved instead of
having a field.
Add enum for audio channel positions
Add some default audio channel layouts
Place the channel layout in the audio format when possible
alsa: place audio channel positions in format
Add sse optimized channel mixing for some common cases
Remove name from port info, it's not mandatory and in the properties
Add direction to port info
Only allow properties inside objects, this makes it easier to
iterate the object, which is needed for efficiently processing
control streams.
Add a choice type to mark variable properties.
SPA_TYPE_Enum -> SPA_TYPE_Id to avoid confusion with choice enum
Make it easier to allocate and initialize properties on the stack
Make more efficient methods to make objects.
