These are mostly the same as the device helpers added in c83b34516929
("alsa-ucm: Add enable, disable, status helpers for devices"), but for
modifiers instead.
Link: b382a00f8b
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Right now we try to add all UCM devices of a verb to a single profile.
But if some devices using different PCMs are configured as conflicting
with one another, we will only be able to utilize one of them, chosen
seemingly based on the order in the UCM config file.
This is not a problem with conflicting devices sharing a PCM, as they
are assigned to the same mapping and the ports mechanism only enables
one of them to be active at a time.
To utilize all devices in a UCM verb even when there are conflicting
devices using different PCMs, calculate subsets of devices which
can be simultaneously used and create a profile for each such set.
Link: 5dd411190d
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
While switching profiles, it was enough to switch UCM verbs since that
disables all enabled UCM devices and every profile had a distinct verb.
However, switching to the current verb does not disable any devices.
To support multiple profiles for a verb we need to explicitly disable
the old profile's devices, since they might be conflicting with the new
profile's devices and will prevent them from being enabled. Compare both
profiles' mappings, and disable the devices not in the new mappings.
Link: e49da7bcd6
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
After previous patches, we should be generating no combination ports, so
we don't need to store multiple modifiers per mapping. Simplify the code
based on this.
Link: 4821a0569e
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
After previous patches, we should be generating no combination ports, so
we don't need to store multiple devices per mapping. Simplify the code
based on this.
Link: 084d70a1e2
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
[Wim: Apply to acp add_profiles() and acp_card_set_profile()]
After previous patches, we should be generating no combination ports, so
we don't need to store multiple devices per port. Simplify the code
based on this.
Link: bf1708213b
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
A previous commit makes mapping names depend on the UCM device name.
Since UCM device names are unique, this means a mapping will at most
have one port and thus no combination ports can be generated.
This removes the dead code in the pa_alsa_ucm_add_ports_combination()
function, unrolls the remaining code in its helper functions that it
used, and renames it to pa_alsa_ucm_add_port() to signal that it no
longer generates combinations.
Link: 0789a8fb76
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
[Wim: Apply to acp add_profiles(), acp_card_set_profile(), compat.h]
PulseAudio combines UCM devices that have the same PlaybackPCM or
CapturePCM value into a single mapping with multiple ports. It also
creates ports in the same mapping for each valid combination of those
UCM devices.
Since mappings are the things we put in profiles, we can put in a
profile either all devices of a joint mapping or none of them. This
causes some complications with device conflicts. For example, a
different UCM device might be marked as conflicting with some (but not
all) of the devices in a joint mapping. In this case we can do one of
three things:
- Include all devices in one profile, and hope the conflicting device
isn't chosen as the mapping's active port. We shouldn't do this as it
puts conflicting devices in the same profile.
- Make one profile with the joint group, and one with the other device.
This is somewhat acceptable as we have no conflicts, but we sacrifice
some compatible combinations of devices.
- Do not group the devices into the same mapping, and make one profile
for each compatible combination of devices. This appears to be the
best option, one where we can always have the maximum number of
working devices.
This patch chooses the third option and makes one input and/or output
mapping per UCM device, by using UCM device names instead of PCM device
strings in the mapping names.
Link: a50330a4a5
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Combination port logic calculates some useful properties for device
groups that we could reuse while generating multiple profiles to support
conflicting devices. Split them into their own functions.
Link: e8e2f4320c
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Right now this check is rejecting devices whose UCM config specifies
neither a conflicting device nor a supported device list, and accepting
devices which specify both. However, a device without neither list is
actually unrestricted, and a device with both lists is a configuration
error. Fix the check to accept the former.
Furthermore, this is missing another case where an already selected
device might have a supported devices list that doesn't have the
candidate device. Make this function also check against that, and also
make it accept devices already in the set.
Link: 5245117781
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
The existing code meant to generate device groups for combination ports
is tightly coupled to port creation. Similar functionality would be
useful to generate nonconflicting device groups for multiple profiles as
well, so this tries to rewrite it into a more reusable state.
Several things (e.g devices, mapping contexts) use idxsets to store a
device selection. This also switches this conformance check and device
group generation to using idxsets to make it easier to work with those,
with the eventual aim to unify device group representations.
Also try to adjust users of these functions to use idxsets these will
need/return, without causing too much interference.
Link: 0f26022843
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Add contains() function that checks if an item is in an idxset. Add
isdisjoint(), issubset(), issuperset() and equals() functions that
element-wise compare two idxsets.
Add complementary functions to the existing idxset search(), first(),
next() functions that work in the reverse direction: reverse_search(),
last() and previous().
Add steal_last() to remove and return the last item in the idxset.
[Alper: original patches for PulseAudio, split from other commit]
Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: fb63e58931
Link: ec668ac44b
Link: 97d9c28579
To support having multiple profiles per UCM verb, split the profile
creation into two parts based on whether they should run once for each
verb or for each profile (maybe multiple times per verb).
Link: 638574c0b7
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
The ucm_create_mapping() function is not idempotent. It looks like it
was meant to be called once per device for the devices of a UCM verb
and takes a profile argument simply because a verb has generated a
single profile so far.
Make sure creating mappings per device and adding those mappings to the
profiles happens as separate steps to make it easier to split UCM verbs
and profiles as concepts.
Link: aa5ced3887
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
So far each profile had the exact name as their associated UCM verb,
which caused the one to be used where the other should have been.
Explicitly get and use the verb name where that was intended, and make
sure things about profiles aren't named after verbs.
Link: 4527890416
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Currently each UCM verb generates one profile named the same as the
verb, meaning it's trivial to know which verb the profile belongs to.
This will be slightly harder to do when we generate multiple profiles
per UCM verb (e.g. to make use of conflicting devices).
It would still be possible to parse the profile name to get the UCM
verb, but instead let's keep track of the struct instance representing
the profile's associated verb. This also lets us remove a block of code
searching for the verb by its name.
Co-authored-by: Jaroslav Kysela <perex@perex.cz>
[Alper: Reused Jaroslav's UCM profile context changes for UCM verb
instead of combined devices.]
Link: 9fc7064b9a
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
While switching profiles, it's possible that we will want to do more
work besides switching UCM verbs. The alsa-card module already has our
profiles as structs, but passes in only the names instead of the entire
struct. Make things work with the struct instead, so we can add other
things (like a UCM context) to it and use those here.
Co-authored-by: Tanu Kaskinen <tanuk@iki.fi>
[Alper: Split into its own commit and integrated Tanu's snippet.]
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: 880ff393f1
[Wim: Apply to acp_card_set_profile() as well]
Co-authored-by: Wim Taymans <wtaymans@redhat.com>
Right now manipulating device status is done inline once while setting a
port. However, we will need to reuse this code to disable conflicting
devices of a device we want to enable. Split it into enable and disable
helper functions.
There is another issue with the device enable logic, where trying to
disabling an already disabled device sometimes fails. To avoid that,
implement a status helper and check if the device we want to enable is
already enabled/disabled before trying to do so.
Link: 9b06e8fef4
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Modifiers currently keep their conflicting and supported devices's
names, and these names are resolved to devices every time we need to use
them. Instead, resolve these device names while creating the modifier
struct and keep track of the resulting device structs in idxsets, same
as how device structs keep track of their support relations.
Link: 9b06e8fef4
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
This is intended to make the current and upcoming code a bit clearer, as
we won't need to constantly check for the existence of these idxsets
before using or operating on them.
Link: d8c89de24d
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
The code that removes the mixer path if probing fails can be called in
the path that sets a non-off device profile on hotplug *before*
card->active_profile is updated, which results in spuriously removing
the mixer path. By this point, context->ucm->active_verb would be set
to the same as the profile name, so we can use that instead to avoid
the issue.
On Apple Silicon machines with the UCM profiles in the Asahi Linux repo,
this manifests as the headphones jack having hardware volume controls
*only* if PA is started with headphones connected and until they are
disconnected. Hotplugs end up triggering the bad codepath, and it falls
back to software volume (which is particularly a problem when the
hardware volume happens to be very low or 0 at that point).
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: 3e038c6d88
Looks like original intention was to scan over sample formats supported by PA,
but code does the scan by list of alsa formats. Reverse the map and adjust
fallback case which now can use the same map.
Link: 5ab2b9cb0e
Perform detection of supported sample format and rates just after device is
opened, before `snd_pcm_hw_params()` is called for the first time. This fixes a
problem where device restricts available sample rates after HW params are set
preventing sample rate detection (seen with UAC2 devices and kernel 6.1.9)
Bug: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1414
Bug: https://github.com/alsa-project/alsa-lib/issues/119
Link: aed52c507f
[Wim: Apply to acp add_pro_profile(), enable pa_alsa_supported_*()]
The full identifier check must be executed for the new melem
creation, otherwise the duplicate control element code check
is reached.
Example (using the snd-aloop driver):
numid=56,iface=PCM,name='PCM Notify',device=1,subdevice=1
numid=62,iface=PCM,name='PCM Notify',device=1,subdevice=2
Link: 81a051089f
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The new helem must be tracked and old helem must be cleared
to make the code work properly. Introduce the pointer to helem
as the private value for melem and add the necessary code.
Also, add a check for the duplicate mixer elements. The duplicate
mixer element invokes the abort check in alsa-lib. Print a warning
instead and handle the exit gracefully.
Link: d1675df0cd
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
It may be possible that the ALSA control element appears
again. Allow this combination by checking, if the pulseaudio
mixer element already exists. Do not create the duplicate
mixer element in this case.
Link: def8eb074e
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
sync_mixer() calls d->set_volume(d, &d->real_volume);
which makes v and &dev->real_volume point to the same memory area
and valgrind complains:
Source and destination overlap in memcpy(0xcc53e2c, 0xcc53e2c, 260)
at 0x488CFA0: __GI_memcpy (vg_replace_strmem.c:1121)
by 0xBB0803F: set_volume (acp.c:1143)
by 0xBB0EDCB: acp_device_set_port (acp.c:1897)
by 0xBA9CD87: impl_set_param (alsa-acp-device.c:757)
because the compiler apparently implicitly converts this into a memcpy()
and memcpy(3) explicitly says "The memory areas must not overlap."
api.acp.hidden-ports and api.acp.hidden-profiles can be used to pass
a json array of ports and profiles to hide. They will not show and
will not be selectable.
Don't try to multiple the max_buffer_size with the frame scale or else
we might try to set a min_buffer_size larger than the max_buffer_size.
Instead, use the frame_scale only to scale the quantum_limit and then
clamp against the max_buffer size.
See #3000
We place the currently configured runtime settings in the properties but
clear the values when not negotiated. Don't do that but place the
defaults (when set) instead.
When we don't have the thread id yet, don't add the pollfds yet
but wait until we do our first wait operation.
Use flags for eventfd. We can use this to communicate between all kinds
of threads with read/write.
Use evl_init() in the init function, don't attach the main loop, just
the thread that dos the first poll.
Some devices appear to set Supported_Max_Codec_Frames_Per_SDU == 1 while
claiming they support two channels per stream, which is then not
possible.
In this case, limit the number of channels by the number of frames per
SDU when selecting.
Also adjust PAC sorting.
It doesn't make sense to hang these on the data loop, so let's have
these on the main loop instead. Also avoids a potential crash while
removing them (since removal happens on the main loop and the data loop
might be polling while we're doing the remove).
added cleanup of unused variables and fix warning about missing initializers
to resolve build warnings in pipewire-rs
Signed-off-by: Dorinda Bassey <dbassey@redhat.com>
Don't use the current time as the nsec field in the graph clock because
it can jitter a lot. Instead, use the smoothed next_time, like we do
for timer based scheduling.
Since we track the current time against the rate converted ideal time,
lock on to the first timestamp when we reset the dll.
See #3657
Don't return the value of the last snd_pcm_resume() call because that
might be -ENOSYS when resume is not implemented for the card and then
the non-error (because we used drop/prepare later) propagates and
logs an error.
