Some of the tools would like to connect to the manager socket first
because they are manager style apps. They however completely ignore any
of the configured sockets in the config and assume everything is the
default.
Fix this by adding a remote.intention = "manager" to those apps. This
instructs the protocol to first try to connect to a socket with the
-manager extension before attempting the regular configured socket.
This makes things work when you have sockets configured in /tmp
and have remote.name = /tmp/pipewire-0 in the config.
We now automatically move non-rt clients into non-rt threads so the
client-rt.conf is obsolete.
Move the module-rt in client.conf and add conditions to disable modules.
Transparently load client.conf in case applications still specify
client-rt.conf.
Custon configuration in the client-rt.conf.d/ should be moved to
client.conf.d/
Add a new followerClock block in the profiler info. This is only set
when the follower could be a driver and it contains the clock info used
for following the driver, mostly the rate difference and delay.
Dump this info in pw-profiler -J
Make sure we always set the info in the clock, especially also when we
are following.
Put the newline and comma right after printing the line so that it gets
flushed immediately. Otherwise we only see the last line in the next
cycle. We then need to end the JSON output with an empty object.
Pretty print the node status instead of the value.
Use the helper instead of duplicating the same code.
Also add some helpers to parse a json array of uint32_t
Move some functions to convert between type name and id.
This gets the next key and value from an object. This function is better
because it will skip key/value pairs that don't fit in the array to hold
the key.
The previous code patter would stop parsing the object as soon as a key
larger than the available space was found.
Add spa_json_begin_array/object to replace
spa_json_init+spa_json_begin_array/object
This function is better because it does not waste a useless spa_json
structure as an iterator. The relaxed versions also error out when the
container is mismatched because parsing a mismatched container is not
going to give any results anyway.
First try to parse the float value as a JSON number and then fall
back to atof to get the locale dependent variant.
This transparently makes things work with values such as 0.5 and 0,5.
Fixes#4234
sndfile actually supports reading and writing from/to stdin/out with the -
filename, so allow that.
Add support for streaming in dsf, dff and midifile as well.
Add a -a option to pw-cat use a pipe with raw bytes, otherwise try to
use the parsers and sndfile to read/write from/to stdin/stdout.
You can then do things like:
sox 2L-053_04_stereo-DSD64.dff -t dsf - | pw-cat -pdv -
pw-cat 07.Joe.Satriani.Clouds.race.across.the.sky.wav | pw-cat -pv -
pw-cat -rmv --target=0 - | pw-mididump -
Fixes: #4204
Use a memstream to collect the arguments so that it can dynamically
allocate as much memory as necessary.
Use a dynamic pod builder to construct the pods so that they can be of
arbitrary size.
Fixes#4166
Add a type to the events, which can be MIDI1 or UMP.
Add debug functions for UMP messages.
midifile only supports saving MIDI1 format files for now. It will convert
to MIDI1 when asked to write an UMP message.
In pw-cat, convert the MIDI1 messages to UMP before sending into the
graph.
With a large number of clients, some of them might be obscured by the
graph. Separate out the legend for now. We might be able to do better
formatting, but for now, this should do.
This prints changed state, props and params when run with -m and running
the `info` command. We try to print only things that have changed. It
would probably be good to make the props (and params) print a diff of
what's changed as well.
In order to show metadata changes when monitoring, a sync must be
triggered just like it is done for other objects, to make sure that
`dump_objects()` is called some time later and the changed metadata
objects are shown.
Otherwise metadata changes would never be displayed unless there
was a change to a different type of object, whose event handlers
do trigger a sync.
Fixes#4053
When a link already exists, the link will fail and the proxy will be
destroyed and the pointer set to NULL. Avoid doing things with the NULL
pointer when cleaning up.
Since `spa/utils/cleanup.h` is not a private header anymore, there is
no need for a separate `pipewire/cleanup.h` since the definitions of
the cleanup routines can now be moved into the respective headers.
`registry_event_global()` creates an `object` object for every object,
not just those matching `data::pattern`. However, previously
`registry_event_global_remove()` only destroyed those objects
that matched the given pattern. Fix that by destroying
every object.
Fixes#4001
Fixes 47e1f38f03 ("pw-dump: also dump object removal")
When processing the output of pw-mon in real time, it is presently
difficult to know when an event is completed because the last attribute
or property is different for each type of event.
This change corrects that by terminating each event with an empty new line.
All pw_core event handlers (`on_core_*()`) currently receive a pointer
to `struct data`, not `struct proxy_data`; as can be seen from the
`pw_core_add_listener()` call in `main()`.
Fixes: cacdcc1b62 ("pw-mon: add filter param to hide props and/or params")
Fixes#3997
Add struct spa_error_location that holds information about some parsing
context such as the line and column number, error and line fragment
with the error.
Make spa_json_get_error() fill in the spa_error_location instead. Add
some error codes to the error state and use this to add a parsing reason
to the location.
Add a debug function to log the error location in a nice way. Also
add a FILE based debug context to log to any FILE.
Replace pw_properties_check_string() with
pw_properties_update_string_checked() and add
pw_properties_new_string_checked(). The check string behaviour can still
be done by setting props to NULL but the main purpose is to be able to
avoid parsing the json file twice in the future.
When using the old pw_properties_update_string(), log a warning to the
log when we fail to parse the complete string.
Use the new checked functions and the debug functions to report about
parsing errors in the tools and conf parsing.
This gives errors like:
```
> pw-loopback --playback-props '{ foo = [ f : g ] }'
error: syntax error in --playback-props: Invalid array separator
line: 1 | { foo = [ f : g ] }
col: 14 | ^
```
Check for JSON parse errors, and log error messages as appropriate.
It's mostly enough to do this where the input is parsed for the first
time, e.g. via pw_properties_new_string, as that already validates the
JSON syntax.
