Use separate timers for driving graph and for flushing, since they don't
have the same period.
Flushing is done based on the time positions of the next sample to be
written, so it will stay in sync with the graph. Because writing too
much data to SCO sockets generally only causes the device to skip ahead,
we don't need to handle the case where the writing has been lagging.
This fixes simultaneous playback to both ALSA and SCO sinks from the
same graph, with SCO as driver, which previously produces broken sound
(e.g. with pw-play --latency 512, linked to the two sinks) ALSA nodes
require regular driver intervals, which was not true previously.
Bigger buffer allows for more fluctuation in transmission rate without
sound glitches.
It doesn't matter much for latency, as under normal conditions we are
not producing data faster than the BT adapter can transmit, so the
buffer generally is almost always empty or full, and in the latter case
we have to reduce the bitrate.
Do not start the playback device until there is data to play. Otherwise
time consuming configuration of other nodes (such as setting hw params
of a capture device) may be done after playback has been started, which
may cause xrun.
The parsing functions expect float values in the default locale so use
the spa_dtoa function to generate such a float.
Fixes setting params with floating point values when the locale is not
the default locale.
Clang 15 at least with my build configuration emits warnings about
function prototypes that lack argument types. Most notably this
happens with functions that take no arguments which in compiler view
equates to the void type i.e. void f(void) instead of void f(). As I
understand, this will become an error in some future Clang release,
so might as well fix it now.
Since these were discovered not by a linter but by the actual compiler
for my particular build configuration, some f() may have escaped for
now. But at least it's enough to build PipeWire with most optional
features enabled even when -Werror=strict-prototypes is enabled.
For anyone else wanting to have a go at this, these can be upgraded
from warnings to errors by adding -Werror=strict-prototypes to the
custom CFLAGS which probably works with GCC, too, but has only been
done with Clang 15.0.2.
Finally my editor automatically stripped trailing spaces upon saving
the modified files. I assume it's probably not worth keeping those
invisible bytes around but this may have slightly dubious implications
as it did also turn indented empty lines of JACK license header into
regular empty lines.
Signed-off-by: Niklāvs Koļesņikovs <89q1r14hd@relay.firefox.com>
The codec may need to take into account endpoint preferred QoS values,
so parse this information and pass it to the codec's get_qos.
All the QoS struct values need to be set, as otherwise BlueZ may pass
uninitialized zero values over the air, which devices can reject. This
does not apply to CIG/CIS ids, which are automatically allocated by
default.
Fixes connecting to nrf5340 devkit, which requires a valid TargetLatency
value.
Commit 947ee152d3 ("bluez: check dbus service before enumerating objects")
introduced a check that would esure that GetManagedObjects()
is not called if the "org.bluez" name has no owner. This
was done to avoid auto-starting the bluez daemon.
However, this is not needed because it is possible to set on
a per-message basis whether or not the destination service
should be automatically started by the dbus daemon.
When we were using the resampler and then bypass it when the configured
rate == 1.0, we create a pop because we don't process the queued data in
the resampler anymore.
Avoid this by keeping the resampler active as soon as the rate property
is set on the audioconvert. The resampler itself will use a more
efficient copy method in that case anyway and it is expected that the
rate will change again later when we need to reactivate the resampler.
By default no modem is allowed.
Property "bluez5.hfphsp-backend-native-modem" can be 'none', 'any' or the
modem device string has found in 'Device' property of
org.freedesktop.ModemManager1.Modem interface, e.g. for PinePhone
"/sys/devices/platform/soc/1c1b000.usb/usb2/2-1".
This allows the HFP HF to retrieve the list of calls with their index,
state and remote number (if available).
This commit shared the list of calls between modemmanager.c and
backend-native.c, and switches call state storage from ModemManager
states to CLCC states
Allow to answer, reject or terminate a call.
Answering or rejecting a call can only be done on an incoming call.
Terminating a call can only be done on active, dialing or alerting call.
The Voice object lists the Call objects, which provides status of each call.
+CIND call indicator is set if at least one of the call is active.
+CIND callsetup indicator is set if one of the call is in ringing in or out
or dialing state.
The Modem object provides the own number (used by +CNUM), the network
service availability and signal strength (used for the +CIND).
+CIND indicators can be activated/deactivated using AT+BIA except for
call, callsetup and callheld indicators which should always reported.
All indicators are enabled on connection.
uint32_t i;
for (i = 0; i < SPA_N_ELEMENTS(some_array); i++)
.. stuff with some_array[i].foo ...
becomes:
SPA_FOR_EACH_ELEMENT_VAR(some_array, p)
.. stuff with p->foo ..
So that we can reuse optimized versions in unoptimized noise
functions.
Do allocation a little different so that we can align everything
from the start.
Loop though coefficients, when all are 0, clear the destination.
When only one coefficient is used, simply copy with volume.
Otherwise run the complete convolution.
