Now that the loop_leave function will assert when the unlock fails we
need to be extra careful with the cancellable loop. If it cancels inside
the poll or one of the before/after callbacks we need to make sure that
we lock the loop correctly again or we will create an assert later on.
Do this by pushing the cleanup earlier and then record all the things we
managed to do before we get canceled. If we ever get canceled and the
lock was unlocked but not locked again, fix this up.
Fix fixes issues when using the JACK API causing assertions when the
data loop is stopped/cancelled.
Calling "iterate()" on a loop that has not been entered by the
calling thread is invalid. So try to diagnose misbehaving applications
on a "best effort" basis by checking `impl::enter_count`.
This is not a foolproof check, and can also technically cause data
races while reading the variable.
See #5148
HFP codecs don't have a direction dependent "target" profile, and this
function was returning false if A2DP is disabled.
Don't check target profile for HFP, leave checks to backend.
Fixes HFP-only configurations, which were missing profiles.
Non-spec compliant devices may set multiple bits in code config, which
we currently reject in validate_config().
enum_config() does work to deal with multiple bits set, but this is
never used, so write the code in a simpler way to return a single
configuration.
Non-spec compliant devices may set multiple bits in AAC AOT, which is
invalid.
In this case, we should normalize to MPEG-2 AAC LC which is the
mandatory value in spec, not to MPEG-4 AAC LC. In select_config() we
also prefer MPEG-2 over MPEG-4.
Some non-spec compliant devices (Sony XB100) set multiple bits
in all AAC field, including the frequency & channels.
Although they set multiple bits, these devices appear to intend that the
sender picks some specific format and uses it, and don't work correctly
with the others.
validate_config() already picks one configuration, so use the result in
enum_config(), instead of allowing also other settings.
Assume devices generally want preferably 44.1 kHz stereo.
Note we cannot reject the configuration, as BlueZ does not necessarily
retry, leaving the device connected but with no audio.
When there is no DBus session bus, creation of the telephony backend
fails, and we later crash on null ptr deref.
In this case, avoid crash trying to create telephony_ag or iterate its
call list.
Some sound cards are only adapted for Android/macOS and other
systems, without considering Linux. The hardware-reported dB
volume is incorrect (while the percentage volume is normal).
Add support for the ignore-dB option to simplify compatibility.
For example, the 3206:0798 HP SIMGOT GEW1 Sound Card reports:
numid=4,iface=MIXER,name='PCM Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=100,step=0
: values=100,100
| dBminmax-min=0.00dB,max=0.39dB
This dB value does not match actual audio perception, and the
vendor attributed this issue to non-target system compatibility.
Sink/Source pairs should not have the same link-group otherwise the
session manager will not be able to autoconnect them with a loopback or
some other internally linked stream.
Currently it is possible for the request completion handler (`impl::requestComplete`)
to observe `impl::source.fd` while it is being modified in `impl::stop()`.
Fix that by closing the eventfd after the camera has been stopped.
Fixes: 3e28f3e859 ("spa: libcamera: source: rework startup sequence")
Newer glibc versions have made certain `str*()` functions into macros
that ensure that the const-ness of the argument is propagated to the
return type.
This function is run for all the nodes with the data loop locked. It can
be used to atomically update multiple node controls.
We can't use the control_changed function because this one runs without
the lock and might do slow things, like what the sofa plugin currently
does.
See #5019
don't read the control ports from the processing thread and check for
updates. Use the control_changed signal to check and update the
parameters of the biquad atimically.
See #5019
Move the card->ignored check to only apply to ACTION_CHANGE, not ACTION_REMOVE. This ensures that ignored cards can still be properly removed when they are unplugged.
With keepalive enabled, we need to emit state change event on acquire
similarly as we do if refcount was already positive.
Co-authored-by: Martin Geier <martin.geier@streamunlimited.com>
When setting up the mix matrix, don't just iterate over the first 64
(CHANNEL_BITS) positions because then we will never be able to configure
more than 64 channels in the matrix.
Instead iterate until we have filled all src and dst entries in the
matrix. For the first 64 positions we might need to check the channel
mask to get the right positions in our source matrix.
Fixes the channel mixer for >64 channels where the positions above 64
where 0 in the matrix and muted.
Fixes#5118
Depending on the codec kind, select appropriate settings to pass
to select_config().
This allows to pass the bluez5.bap.force-target-latency property,
and so to select the same configuration.
Some PTS tests (e.g. BAP/UCL/SCC/BV-046-C or BAP/UCL/SCC/BV-077-C)
requests to select QoS from low-latency or high-reliabilty.
The bluez5.bap.force-target-latency device property allows to force it.
For other values than low-latency or high-reliabilty the QoS selection
will use both tables to find the more appropriate configuration.
Only set rate_match rate to DLL correction when matching is active.
When ALSA is driver and not matching, set rate to 1.0 to indicate no rate adjustment needed.
DLL still runs for buffer level management but rate_match should not expose correction
when matching is inactive to avoid confusion during debugging.
Signed-off-by: Stanislav Ruzani <stanislav.ruzani@streamunlimited.com>
On some device combinations (MT7925 / Sony LinkBuds S) the low-latency
48 kHz QoS crackle.
It's probably better to default to high-reliability for those, until we
have proper quality vs. latency configuration in place.
sizeof(adapter) is larger than the big_entry->adapter and so the code
would copy too much. Instead only copy the strlen of the parsed
adapter, which we checked above to be smaller than the available size.
This doesn't copy the 0 byte because the memory is assumed to be 0
filled already by the calloc.
If the address is exactly the HCI_DEV_NAME_LEN, it will result in a non-0
terminated string, which may or may not be a problem...
By setting the hci handle (e.g. hci0) of the desired adapter, the BIG
config will only applied on that adapter. In case no "adapter" entry in
the config is given, it will be applied on all adapters.
Signed-off-by: Alexander Sarmanow <a.sarmanow@televic.com>
Commit 2942bae034 introduced parsing of
"SupportedFeatures" which uses a third DBusMessageIter pointer.
*** stack smashing detected ***: terminated
==389050==
==389050== Process terminating with default action of signal 6 (SIGABRT)
==389050== at 0x4F57B2C: __pthread_kill_implementation (pthread_kill.c:44)
==389050== by 0x4F57B2C: __pthread_kill_internal (pthread_kill.c:78)
==389050== by 0x4F57B2C: pthread_kill@@GLIBC_2.34 (pthread_kill.c:89)
==389050== by 0x4EFE27D: raise (raise.c:26)
==389050== by 0x4EE18FE: abort (abort.c:79)
==389050== by 0x4EE27B5: __libc_message_impl.cold (libc_fatal.c:134)
==389050== by 0x4FEFC48: __fortify_fail (fortify_fail.c:24)
==389050== by 0x4FF0ED3: __stack_chk_fail (stack_chk_fail.c:24)
==389050== by 0xBC1D1A1: remote_endpoint_update_props (bluez5-dbus.c:3137)
==389050== by 0xB53609F: ???
==389050== by 0x1DF: ???
==389050== by 0x61C17BF: ??? (in /usr/lib/x86_64-linux-gnu/libdbus-1.so.3.32.4)
==389050== by 0x1DF: ???
==389050== by 0xC5ED113: ???
Replace magic numbers (0x02, 0x05) with named constants BT_CODEC_CVSD
and BT_CODEC_MSBC for better code readability. Also remove redundant
zero initialization of num_caps field since the buffer is already
memset to zero.
The sco_offload_btcodec() function now returns void and only skips
offload setup when using the default datapath, simplifying the logic
and removing the need for explicit feature flag checks.
Add support for configuring the SCO hardware offload data path for
HFP/HSP profiles using the Bluetooth SIG-specified procedure. This
enables vendor-specific SCO offload integrations.
Changes:
- Add `bluez5.hw-offload-datapath` configuration property (default: 0)
- Implement `sco_offload_btcodec()` to set BT_CODEC socket option
- Add `SPA_BT_FEATURE_HW_OFFLOAD` quirk feature flag
- Apply offload configuration when creating SCO sockets if quirk enabled
- Document new property in pipewire-props.7.md
The datapath ID is configurable via device parameters and only applied
when the hardware offload feature flag is set in quirks, allowing
platform-specific SCO offload implementations.
Clamp the control values to their min/max.
Remove the default_control array, we can just restore the default with
the port_set_control_value(). Do this when no value has been set on the
port when we set up the graph. The avantage is that we calculate the
default, min and max correctly when they depend on the graph rate.
Fixes#5088
There is no reason to fail when there is no input or output port.
We can simply run the graph with what there is. Even if there is no
input or output at all, running one instance of the plugins is
possible.
Add a busy builtin plugin that has no ports and keeps the CPU IDLE or
busy for the give percent.
The filter graph has, after parsing, a default number of input and
output ports. This is based on the description or the first/last element
input and output ports. Pass this information in the properties when
we emit the info.
Don't use the number of configured input/output ports as the default
number of channels in filter-chain because this is only determined after
activating the graph. Instead, use the default input/output channels.
The result is that when you load filter-chain without any channel
layout, it will default to the number of input/outputs of the graph
instead of 0. This allows for the node to be visible in the pulseaudio
API.
Fixes#5084
