Get the ucm prefix only once, when we open the UCM card and then
use it for all devices using the card.
Construct the device name right before we open it with the ucm prefix
and possibly the AES flags instead of messing with the property.
Just like the latency, move the codecs to the device Route param.
This way, it is easier for the session manager to save and restore
the codecs as part of the Route settings.
If a program using pipewire-alsa calls snd_pcm_close() immediately after
snd_pcm_prepare() without reading or writing any data the client node
may be removed before the session manager can link it, which would
result in the following log warnings:
can't link 35:40 -> 43:48: link-factory: unknown input port 48
error id:25 seq:11467 res:-22 (Invalid argument): link-factory: unknown input port 48
can't link 35:41 -> 43:46: link-factory: unknown input port 46
error id:16 seq:11468 res:-22 (Invalid argument): link-factory: unknown input port 46
Use the param user field to tag changes in the params.
codec changes emits an EnumFormat and Props change.
Accumulate various param changes and emit them together.
We start with setting the visitied flag on the driver. Still follow the
links to other visited nodes because it might make them active. for
example, adding a link between two midi ports should make the midi
driver running so that data flows between the ports.
See #1559
Actually set the right properties on the source and sink.
Not quite right because the pulseaudio ROC has a sink-input or a
playback stream in pipewire.
See #1538
ALSA has problems with creating more than 8 configs per card so cache
the config per card and reuse it.
Fixes problems with no devices after logging out and in again because
ALSA can't create UCM profiles anymore.
See #1553
Make the streams passive so that things can suspend.
Use a differend node.name for the input and output streams so that
autoconnect can actually remember the right target.
Make the media.name and description nicer.
See #1557
Audio with big frame sizes (especially audio with multiple channels) needs more
buffer size than the one calculated with the current formula. This patch uses
the frame size to calculate the buffer size, fixing playback issues for clients
configured in passthrough mode.
When the client adapter is configured in passthrough mode, the stream param
changed event in pipewire-pulse is emitted before the session manager creates
the link, and not after. Therfore, the peer can never be found when replying
create stream, and the pulseaudio application receives a stream error.
This patch delays the create stream reply until the link is added if the peer
cannot be found, fixing the above race conditon to allow passthrough mode to
work with pulseaudio applications.
If you use multiple BT adapters, it's annoying that PW tries to
autoconnect to the device via all available adapters, and you end up
with multiple connections to the same device (which does not necessarily
work).
Avoid this by autoconnecting with only the first adapter that sees the
device.
When we inactivate the stream, clear the draining/drained state.
Otherwise, the stream stays in the drained state and won't call the
process function anymore when we activate it again.
This used to work before because we called the process function from the
Start command, which would queue a buffer and unset the drained flag.
Calling the process function from Start was however not right when the
process function needed to be called from the RT thread or when the
stream is a driver.
Fixes the issue where speaker-test would only play one channel.
Make the input buffer a little larger and leave the top blockSize
samples zero. That way we can fill up the lower part, leave the upper
part zero padded and feed this to the fft directly. Also only clear
the lower part when we can't fill it completely.
This removes some memcpy and memset operations.
We don't currently implement encoding for the duplex channel
for these codecs, so they are not fully functional as A2DP sinks,
and their main use is anyway with headphones.
Also, the number of endpoints in BlueZ appears to be limited, and
appears to be counted across all adapters. Unclear whether this comes
from AVDTP limitation, but currently plugging in a second BT adapter
causes the second media application registration to fail. This change
reduces the number of endpoints enough so that registration succeeds for
two adapters.
Virtual devices tend to start with partial fields set in the EnumFormat
param (usually rate is missing). This causes virtual devices to be
invisible until they are used in some way.
Fix this by relaxing the parsing of EnumFormat and by falling back to
the server defaults for the unspecified fields.
Fixes#1413
When we send a Play request to the client but it deactivates before
sending the reply, make sure we send a Pause request as well so that
Play/Pause is always matched up.
Fixes#1548
We need to manage our own flags based on the direction of the follower.
We also need to make sure we only clear the NEED_CONFIGURE flag
after we are actually configured, not just when we configured our
internal converter.
See #1548
