The new helem must be tracked and old helem must be cleared
to make the code work properly. Introduce the pointer to helem
as the private value for melem and add the necessary code.
Also, add a check for the duplicate mixer elements. The duplicate
mixer element invokes the abort check in alsa-lib. Print a warning
instead and handle the exit gracefully.
Link: d1675df0cd
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
sync_mixer() calls d->set_volume(d, &d->real_volume);
which makes v and &dev->real_volume point to the same memory area
and valgrind complains:
Source and destination overlap in memcpy(0xcc53e2c, 0xcc53e2c, 260)
at 0x488CFA0: __GI_memcpy (vg_replace_strmem.c:1121)
by 0xBB0803F: set_volume (acp.c:1143)
by 0xBB0EDCB: acp_device_set_port (acp.c:1897)
by 0xBA9CD87: impl_set_param (alsa-acp-device.c:757)
because the compiler apparently implicitly converts this into a memcpy()
and memcpy(3) explicitly says "The memory areas must not overlap."
api.acp.hidden-ports and api.acp.hidden-profiles can be used to pass
a json array of ports and profiles to hide. They will not show and
will not be selectable.
Only schedule nodes together when there is just 1 capture and 1 playback
device. Devices might be mutually exclusive or require special setup
that would break otherwise.
See #3556
Add an option to automatically use snd_pcm_link when the follower clock
is matching the driver. Only set this to true in pro-audio and when
nodes are scheduled together.
See #3556
When we are using the same clock (!matching) try to link the two PCM
devices together. This starts and stops the devices at the same time and
gives better latency.
Perform detection of supported sample format and rates just after device is
opened, before `snd_pcm_hw_params()` is called for the first time. This fixes a
problem where device restricts available sample rates after HW params are set
preventing sample rate detection (seen with UAC2 devices and kernel 6.1.9)
The new helem must be tracked and old helem must be cleared
to make the code work properly. Introduce the pointer to helem
as the private value for melem and add the necessary code.
Also, add a check for the duplicate mixer elements. The duplicate
mixer element invokes the abort check in alsa-lib. Print a warning
instead and handle the exit gracefully.
Fixes: def8eb074 ("alsa-mixer: allow to re-attach the mixer control element")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
After previous patches, we should be generating no combination ports, so
we don't need to store multiple devices per mapping. Simplify the code
based on this.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
After previous patches, we should be generating no combination ports, so
we don't need to store multiple devices per port. Simplify the code
based on this.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
A previous commit makes mapping names depend on the UCM device name.
Since UCM device names are unique, this means a mapping will at most
have one port and thus no combination ports can be generated.
This removes the dead code in the pa_alsa_ucm_add_ports_combination()
function, unrolls the remaining code in its helper functions that it
used, and renames it to pa_alsa_ucm_add_port() to signal that it no
longer generates combinations.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
While switching profiles, it's possible that we will want to do more
work besides switching UCM verbs. The alsa-card module already has our
profiles as structs, but passes in only the names instead of the entire
struct. Make things work with the struct instead, so we can add other
things (like a UCM context) to it and use those here.
Co-authored-by: Tanu Kaskinen <tanuk@iki.fi>
[Alper: Split into its own commit and integrated Tanu's snippet.]
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
We always probe the Pro Audio profile with the maximum number of
channels but this can lead to a more limited amount of sample rates.
Add an option to set the channels used when probing so that the other
samplerates become available.
Fixes#2990
And... we're back to 48Khz probing. Some devices fail to probe with
44.1KHz so when we need to choose between 2 bad things we choose to
do the right thing, which is probe in 48KHz.
Fixes#2857
Assume that capture and playback nodes from a device have different
clocks. This enables the adative resampler to match them. A lot of devices
actually have slightly different rates and would work out of the box
with this fix.
Make an exception when the card is configured in the pro audio profile.
Then we force the same clock on all device nodes and avoid resampling
and rate matching. This can still be changed with a session manager
override.
The pulseaudio channel map can only hold 32 AUX channels and we reuse
them when we need more. When we find a duplicate channel, map it to the
next AUX channels.
Just like the latency, move the codecs to the device Route param.
This way, it is easier for the session manager to save and restore
the codecs as part of the Route settings.
When we store the real_volume we get a hardware_volume as stored
in the mixer and a residual software_volume.
When we read the volume from the card, we need to compare this against
the hardware_volume we stored to check if something changed, not
against the real_volume that also contains the leftover software_volume.
Strip the alibpref from the device string in the mapping name. This
name is used to generate the node name eventually and we don't want
this random identifier in it.
Fixes#1362
Strip the _alibpref from the device name, it contains a local counter
to identify the ucm card that should remain internal. We set a flag on
the device to notify of this.
Re-add the _alibpref of the local card to the device name if the
device was flagged.
See #1286
The alibpref fallback does not contain the card number but it is
a local counter instead. Just check if it starts with something in
case the alsa library is not patched to return _alibpref.
Use _alibpref to check if a device needs a UCM local config. Mark
the device as such and use this to set the OPEN_UCM property on
the device.
Open the UCM for a card when the device has the property set. Use the
same logic for loading the UCM as the acp code.
See #1251
When we enable a device, the node will be created and its software
volume will be set to 100%. Update the device volume with this as
well so that changing the volume has an effect.
Fixes#1198
