This is needed for example for Clang compiler which uses different
annotations than GCC. It will make WebRTC to happily use PipeWire
since the spa library is header-only and WebRTC defaults to use
Clang with -Wimplicit-fallthrough.
We only need as many ports and buffer data as the maximum number
of channels, which is 64.
Fix empty output size. We're only ever going to fill this with
float samples.
Make a new DRAINED status.
Place the DRAINED status on an input IO when a stream is out of
buffers and draining.
All nodes that don't have HAVE_DATA on the input io need to copy
it to the output io and return the status. This makes sure the
DRAINED is forwarded and nodes return DRAINED from _process()
DRAINED on the resampler flushes out the last queued samples and then
forwards the DRAINED in the next iteration.
Emit a new drained signal from the context when a node returns
DRAINED. Use this to trigger the drained signal in the stream.
Use the DSP media subtype to describe DSP formats. DSP formats
don't include the rate, channels and channel position in the
format and must use the rate and duration from the position io. This
makes it possible to later change the samplerate dynamically without
having to renegotiate the graph.
The same goes for the video DSP format, which uses the io_video_size
from the io_position to get the size/stride. Set this up in the node
based on the defaults from the context.
Make it possible to define defaults in the daemon config file, such
as samplerate, quantum, video size and framerate. This is stored in
the context and used for the DSP formats.
This is more in line with wayland and it allows us to create new
interfaces in modules without having to add anything to the type
enum. It also removes some lookups to map type_id to readable
name in debug.
Implement per channel volume on channelmix. Extend control on stream to
take an array of values when possible.
Remove name argument from pw_node_new and pw_device_new. We can pass
this as a property instead.
Improve properties on nodes to more closely match what pulseaudio does.
Don't let the monitor do too much with the udev properties but let the
session manager set the description and icon-names.
Remove some change_mask flags for things that don't change in
introspect. Use the flags to mark changes in -cli and -monitor.
Add a new PortConfig parameter to configure ports of elements that
are marked with the SPA_NODE_FLAG_*_PORT_CONFIG. This is used to
configure the operation of the audioconver/audioadapter nodes and
how it should convert the internal format. We want to use the
Profile parameter only for cases where there is an enumeration of
values, like with device configuration.
Add unit tests for audioconvert and adapter to check if they handle
PortConfig correctly.
Make the media session use the PortConfig to dynamically configure
the device nodes.
Remove audio-dsp, it is not used anymore and can/should be implemented
with a simple audioconvert spa node now and some PortConfig.
Remove the CAN_USE_BUFFERS flag, it is redundant. We can know this
because of the IO params and buffer params.
Add flags to the port_use_buffer call. We also want this call to
replace port_alloc_buffer. Together with a new result event we can
ask the node to (a)synchronously fill up the buffer data for us. This
is part of a plan to let remote nodes provide buffer data.
Define a set of standard factory names and document what they
contain. This makes it possible to change the implementation by
mapping the factory-name to a different shared library.
The interface struct has the type,version and methods of the
interface.
Make spa interfaces extend from spa_interface and make a
separate structure for the methods.
Pass a generic void* as the first argument of methods, like
we don in PipeWire.
Bundle the methods + implementation in a versioned inteface
and use that to invoke methods. This way we can do version
checks on the methods.
Make resource and proxy interfaces that we can can call. We
can then make the core interfaces independent on proxy/resource and
hide them in the lower layers.
Add add_listener method to methods of core interfaces, just
like SPA.
Also disable passthrough when we first negotiate output format/buffers
and passthrough is not possible because the output buffer does not
have the dynamic data flag set..
Pass some state to convert and channelmix functions. This makes it
possible to select per channel optimized convert functions but
also makes it possible to implement noise shaping later.
Pass the channelmix matrix and volume in the state.
Handle specialized 2 channel s16 -> f32 conversion
Add some const and SPA_RESTRICT to methods
When the input and output is the same, work in passthrough mode
where we simply copy place the input pointer onto the output buffer
without doing a memcpy.
Do memcpy when the resampler is not active.
Make struct spa_node_events for events emited from the main thread
and keep the spa_node_callbacks for the data thread callbacks.
The add_listener method installs the events and it's possible to
install multiple handles. Adding a listener first emits the info
and port_info events when installed, similar to how the PipeWire
proxy bind works.
This removes the need for the spa_pending_queue and makes it easier
to implement the _sync versions.
Add some helpers to make it easier for plugins to emit all the info
to new listeners.
Use the listeners for devices as well.
Add a new struct spa_param_info that lists the available params on
a node/port and if they are readable/writable/updated. We can use
this to replace and improve the PARAM_List and also to notify
property change and updates.
Update elements and code to deal with this new param stuff. Add
port and node info to most elements and signal changes.
Use async enum_params in -inspect and use the param info to know
which ones to enumerate.
Use the port info to know what parameters to update in the
remote-node.
Don't use special callback in node to receive the results. Instead,
use a generic result callback to receive the result. This makes things
a bit more symetric and generic again because then you can choose how
to match the result to the request and you have a generic way to handle
both the sync and async case. We can then also remove the wait method.
This also makes the remote interface and spa interface to objects very
similar.
Make a helper object to receive and dispatch results. Use this in the
helper for enum_params.
Make device use the same result callbacks.
Make a special function for pending results to make it clear that it
is different from normal results. Don't pass result code to result
function, it is not useful because since the callback is called, all
must be fine.
The spa_pending is removed from the list right before the callback
and can thus be freed in the callback. Pass the spa_pending in
the pending callback so that extra data can be added that way.
Reuse spa_pending objects in link and nodes instead of allocating. We
always only have one pending operation and we can cancel any pending
previous operation by removing the pending.
Remove the done and error callbacks. The error callback is in an
error message. The done callback is replace with spa_pending.
Make enum_params take a callback and data for the results. This allows
us to push the results one after another to the app and avoids ownership
issues of the passed data. We can then extend this to handle the async
case by doing a _wait call with a spa_pending+callback+data that will
be called when the _enum_params returns and async result.
Add a sync method.
All methods can now return SPA_RESULT_IS_ASYNC return values and you
can use spa_node_wait() to register a callback when they complete
with optional extra parameters. This makes it easier to sync and
handle the reply.
Make helper methods to simulate the sync enum_params behaviour for
sync nodes.
Let the transport generate the sequence number for pw_resource_sync()
and pw_proxy_sync(). That way we don't need to keep track of numbers
ourselves and we can match the reply to the request easily.
Add a port_info event. With this, we get updates to ports pushed to
us, which is more convenient and also allows for better dynamic
add/remove of ports.
We don't need to the PortChanged event anymore
We can remove the get_port_ids/get_n_ports/port_get_info methods.
Update plugins
