Some PTS tests (e.g. BAP/UCL/SCC/BV-046-C or BAP/UCL/SCC/BV-077-C)
requests to select QoS from low-latency or high-reliabilty.
The bluez5.bap.force-target-latency device property allows to force it.
For other values than low-latency or high-reliabilty the QoS selection
will use both tables to find the more appropriate configuration.
By setting the hci handle (e.g. hci0) of the desired adapter, the BIG
config will only applied on that adapter. In case no "adapter" entry in
the config is given, it will be applied on all adapters.
Signed-off-by: Alexander Sarmanow <a.sarmanow@televic.com>
Add support for configuring the SCO hardware offload data path for
HFP/HSP profiles using the Bluetooth SIG-specified procedure. This
enables vendor-specific SCO offload integrations.
Changes:
- Add `bluez5.hw-offload-datapath` configuration property (default: 0)
- Implement `sco_offload_btcodec()` to set BT_CODEC socket option
- Add `SPA_BT_FEATURE_HW_OFFLOAD` quirk feature flag
- Apply offload configuration when creating SCO sockets if quirk enabled
- Document new property in pipewire-props.7.md
The datapath ID is configurable via device parameters and only applied
when the hardware offload feature flag is set in quirks, allowing
platform-specific SCO offload implementations.
Add options to control advertised delays supported.
Smaller delay needs smaller node.latency be used, so use 40ms as a
reasonable minimum preferred delay.
Parse TMAP / GMAP features from MediaEndpoint:SupportedFeatures and pass
them onto the codec in SelectProperties, so it can determine which
mandatory features the device supports.
Add configuration option for specifying which TMAP / GMAP feature bits
we advertise to remote side.
Although some of these could be determined automatically, for production
systems it's better to have explicit option to specify which ones should
be advertised as this may depend on HW capabilities.
Makes it possible to define audio channels and position with a
predefined layout string.
It is easier and less error prone to say "5.1" than to spell out
[ FL FR FC LFE RL RR ].
AUX channels have a special syntax. AUX<N> will make <N> AUX
channels. Easier to say AUX128 than to write an array with the
128 AUX channels.
Add support for rlimit.<resource> = <value> in the context.properties to
adjust the rlimits of the process. A value of -1 sets the max limit.
This can be used to increase the number of file descriptors in a
pipewire process when select() is not used, for example. Other resource
limits might be interesting as well maybe.
Fixes#4047
On production systems, having a constant high latency is favored over
dynamically adjusting it in order to optimize for low latency,
because every time a dynamic adjustment happens, there's a glitch.
This adds an option to let the user specify the exact amount of latency
they want.
In USB Audio Class 2 (UAC2) setups, pitch control is handled by
feedback endpoints. The host adjusts its data rate accordingly.
When pitch control is active (pitch_elem), applying the default
delay-locked loop (DLL) bandwidth can lead to instability and
oscillations around the target rate.
This patch adds a new parameter, api.alsa.dll-bandwidth-max, to
configure the maximum DLL bandwidth. It introduces a new field
in the ALSA state to store this value.
By default, it uses SPA_DLL_BW_MAX, but when pitch control is in
use, setting it to a lower value (e.g. 0.02) helps ensure better
stability, based on empirical testing.
Add configuration options for the BAP/PACS sink and source endpoint
location (= channel positions) and context settings.
Although BlueZ associates these with individual endpoints, in the PACS
spec they are actually device-global, so configure directly in monitor
settings.
Parse BAP settings in a single place, and simplify QoS customization a
bit.
Ensure the selected preset gets selected.
For all the BAP codec settings, use device settings instead of global
monitor ones.
Add an option to add the MIDI2 flag on ports. This is disabled by
default because most JACK apps don't know about the flag and then
refuse to show the MIDI ports.
Fixes#4584
We now automatically move non-rt clients into non-rt threads so the
client-rt.conf is obsolete.
Move the module-rt in client.conf and add conditions to disable modules.
Transparently load client.conf in case applications still specify
client-rt.conf.
Custon configuration in the client-rt.conf.d/ should be moved to
client.conf.d/
When api.alsa.split-enable=true for ACP device, instruct UCM to not
use alsa-lib plugins for SplitPCM devices.
Grab the information from UCM for the intended channel remapping, and
add the splitting information to the nodes emitted.
Session manager can then look at that, and load nodes to do the channel
splitting.
Don't use the api.alsa.soft-mixer option to disable the path selection
but make a new api.alsa.disable-mixer-path.
Disabling the path selection might leave cards unusable after suspend,
so a separate option is a better idea.
See #4311
Collect the list of object properties into a single place.
Group properties in the index based on the object type. Consider
"Monitor" as a separate object type, as it's generally configured
separately.
Add something about Port, Link, and Client properties. Just explain some
of these as they're fairly technical, so just link to API docs.
Currently, the user sets the Broadcast Code via an array of integers
in the config file. However, the Bluetooth Core Specification indicates
that it should be set via a 16 byte string. This commit replaces the old
implementation with the one required by the spec.
Tested the commit with the example provided in the Core Spec:
Broadcast Code: Børne House
Result from btsnoop log:
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31
...
Broadcast Code[16]: 000000006573756f4820656e72b8c342
The result matches the example given in the spec.
Add "encryption" parameter to bluez5.bcast_source.config entry in
the configuration file. This allows the user to control the use of
Broadcast encryption.
We handeled "arg1 arg2 ... " before and used to split between spaces to
get the arguments for execvp but that doesn't work so well when there
are arguments with spaces.
Instead use JSON parsing to get the array of arguments. This make it
possible to use [ arg1 arg2 .. ] and quote each arg separately. You
can still use the old method and even double escape:
"\"arg1\" \"arg2 with spaces\"" or
[ "arg1" "arg2 with spaces" ]
