HFP 1.8 states in 4.35.1:
Due to the small inconsistency between the GSM standard [2]) and the current
Headset specification ([3]), the HF shall also accept the “=” symbol,
in place of “:”, as a valid separator for this unsolicited result code.
iOS seems to use "=", so accept that as well.
See #2463
Both HFP and HSP require an AT command from HF/HS to AG to
be terminated by CR, not LF. (HFP 1.8, 4.34.1; HSP 1.2, 4.8.1)
See #2463
Fixes: 0b2d3730b6 ("bluez5: Add HFP HF support")
`strsep()` is simpler to use than `strtok()` or `strtok_r()`
while being thread-safe and reentrant.
Although it is an extension, it is available in both glibc and musl.
When rfcomm_hfp_ag() returns false, an "ERROR" reply is sent.
When testing if the SLC is configured, 2 "ERROR" replies are sent, which
should not be done.
Most feature checks already use #ifdef, and do not care about
the value of the macro. Convert all feature checks to do that,
and simplify the meson build scripts by replacing
if cond
cdata.set('X', 1)
endif
with
cdata.set('X', cond)
Using a probe connection to determine adapter msbc capability causes
problems on some adapters (ff8c3d2, 84bc0490a5, 717004334b,
pipewire#2030) and seems to be a bad idea.
Go back to probing for transparent msbc transport capability via HCI
commands. bluetooth/hci.h may be deprecated later, but for now it's
better to go back to using it. (In practice, adapters not supporting
esco appear to be fairly rare; kernel commit in 2013 refers to "older
devices", so if we can't use HCI, assume the adapter supports the
necessary modes.)
All exposed bluez devices should have an adapter specified at all times.
Adapter-less devices appear in some race conditions in BlueZ interface.
Require device has non-null adapter, in all cases before adding any
profiles (which exposes the device), and reject BlueZ profile connection
attempts in that state.
If an adapter gets removed by BlueZ, remove also all its devices, so
that device->adapter pointers stay valid.
Simplify the key-value pair parsing for AT+IPHONEACCEV commands,
and move the handling of {key,indicator}-value pairs into
dedicated functions. Furthermore, fix a comment.
There's a report that on Intel 8086:2723 + Sony WH-1000XM4, the connect
probe shuts the device down.
So, use an invalid dst address instead, since we don't need the host to
be up.
Fixes: 84bc0490a5
Fixes: 717004334b
The msbc capability connection probe seems to cause problems on Intel
Bluetooth 8087:0a2b (Intel 8265), resulting to subsequent connections
apparently ending up with wrong altsetting.
According to testing, the problem is connecting to self, so connect to
device instead.
Fixes#1671
Don't do a blocking probe of native backend presence, because it may
trigger DBus activation for Bluez. If the DBus activation fails, it
ends up blocking until timeout.
ofono/hsphfpd usually don't have DBus activation configured, so they
fail instantly (which is why this problem was not encountered, even
though they do blocking calls on startup in previous pipewire versions
too).
Instead, select the backend once we have Bluez objects listed.
BlueZ 6 is planning to make most of libbluetooth private. In
particular, the direct hci access is planned to be removed. This is
currently used for determining adapter msbc support.
Instead of using libbluetooth API, try to determine msbc support by
a connect() attempt, which the kernel should reject when not supported.
It seems not uncommon that people have not properly configured ofono
running, which results to loss of HFP/HSP functionality. It's less
surprising if the backend selection is fixed in the configuration file,
and (by default) does not depend on running services.
Add a configuration file option for selecting HFP/HSP backend, and set
the default value to the native backend. Emit warnings if conflicting
backend services are detected to be running.
Also cleanup hfp/hsp backend handling a bit, now that it's mostly
abstracted behind an interface.
In one we can duplicate the spa_asprintf call without real drawbacks.
The second one can be split up without losing details. Note that there
is another one in backend-native.c where splitting it up will make the
code harder to understand. The warning for that one remains.
HF indicator 2 (see [assigned-numbers], Hands-Free Profile) is able to
report battery percentage at 1% intervals (in range [0, 100]), contrary
to the `+XAPL` `+IPHONEACCEV` extension which only supports 10%
increments. This does not guarantee increased granularity however, as
peers may still be limited to imprecise battery measurements internally
or round to coarser percentages.
Supporting both additionally broadens the range of devices for which PW
can report its battery level.
[assigned-numbers]:
https://www.bluetooth.com/specifications/assigned-numbers/
Mark some structures, arrays static/const at various places.
In some cases this prevents unnecessary initialization
when a function is entered.
All in all, the text segments across all shared
libraries are reduced by about 2 KiB. However,
the total size increases by about 2 KiB as well.
Instead of spa_aprintf(), convert `rfcomm_send_{cmd,query}`
to take a printf-style format string.
Furthermore, handle overflows and return errors from
`rfcomm_send_{cmd,reply}`. And make those functions
take an rfcomm as argument instead of any spa_source.
And match conversion specifiers to the actual types
in format strings.
Use the quirks database to check whether to enable MSBC codec for each
device.
If quirks don't allow ALT1 mode for an USB adapter, check whether the
adapter has an usable ALT6 mode and disable MSBC if not.
Keep all types of devices, only emit device info if device has audio profiles.
Heuristically add profiles based on bluez actions so device can still be connected
even without initial UUIDs info from signal InterfaceAdded for org.bluez.Device1.
Fixes#1330
This replaces the manual check for "true" and some (inconsistent) return value
of atoi. All those instances now require either "true" or "1" to parse as
true, any other value (including NULL) is boolean false.
This apparently causes delays in shutdown under some conditions, and
closing the DBus connection should be enought to tell BlueZ that we are
shutting down.
