Add mixer paths and profile-sets as well

So we don't have to rely on pulseaudio installed ones

spa/plugins/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf

@@ -0,0 +1,112 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+; Creative Sound Blaster Omni Surround 5.1
+;
+; This config supports Linux 4.3-rc1+.
+; By default there are some non-existing (physically) inputs and outputs that
+; are not present in this config.
+; Also in addition to natively supported modes (such as stereo, 5.1 and stereo
+; S/PDIF) following useful output modes are added: 2.1, 4.0, 4.1 and 5.0.
+;
+; NOTE: in 2.1 and 4.1 physical LFE output will be different than in 5.1 mode.
+;
+; See default.conf for an explanation on the directives used here.
+
+[General]
+auto-profiles = no
+
+[Mapping analog-stereo-input]
+device-strings = hw:%f
+channel-map = left,right
+paths-input = analog-input-mic analog-input-linein
+direction = input
+
+[Mapping analog-stereo-output]
+device-strings = front:%f
+channel-map = left,right
+paths-output = analog-output
+direction = output
+
+[Mapping analog-surround-21]
+device-strings = surround51:%f
+channel-map = front-left,front-right,aux1,aux2,aux3,lfe
+paths-output = analog-output
+direction = output
+
+[Mapping analog-surround-40]
+device-strings = surround51:%f
+channel-map = front-left,front-right,rear-left,rear-right
+paths-output = analog-output
+direction = output
+
+[Mapping analog-surround-41]
+device-strings = surround51:%f
+channel-map = front-left,front-right,rear-left,rear-right,aux1,lfe
+paths-output = analog-output
+direction = output
+
+[Mapping analog-surround-50]
+device-strings = surround51:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center
+paths-output = analog-output
+direction = output
+
+[Mapping analog-surround-51]
+device-strings = surround51:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+paths-output = analog-output
+direction = output
+
+[Mapping iec958-stereo]
+device-strings = iec958:%f
+channel-map = left,right
+paths-output = iec958-stereo-output
+direction = output
+
+[Profile output:analog-stereo-output+input:analog-stereo-input]
+output-mappings = analog-stereo-output
+input-mappings = analog-stereo-input
+priority = 7
+
+[Profile output:analog-surround-21+input:analog-stereo-input]
+output-mappings = analog-surround-21
+input-mappings = analog-stereo-input
+priority = 6
+
+[Profile output:analog-surround-40+input:analog-stereo-input]
+output-mappings = analog-surround-40
+input-mappings = analog-stereo-input
+priority = 5
+
+[Profile output:analog-surround-41+input:analog-stereo-input]
+output-mappings = analog-surround-41
+input-mappings = analog-stereo-input
+priority = 4
+
+[Profile output:analog-surround-50+input:analog-stereo-input]
+output-mappings = analog-surround-50
+input-mappings = analog-stereo-input
+priority = 3
+
+[Profile output:analog-surround-51+input:analog-stereo-input]
+output-mappings = analog-surround-51
+input-mappings = analog-stereo-input
+priority = 2
+
+[Profile output:iec958-stereo+input:analog-stereo-input]
+output-mappings = iec958-stereo
+input-mappings = analog-stereo-input
+priority = 1